Vertical V5 Battery Cage #BESTRobotics2025
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a V5 Robot Battery (Li-Ion 1100mAh) vertically, saving space on a robot platform for other components.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
The Vertical V5 Battery Cage is an attachable structural component for robots that will hold and secure a V5 Robot Battery (Li-Ion 1100mAh) in a vertical position. This component addresses the problem of not enough space being available for other electrical components on robot platforms. The design for the cage allows all the input and output ports for the battery to be accessed. The design prioritizes being lightweight, and using vertical space to take up as less space on the robot bed as possible.
It was noticed that the beams were too thin, being 0.45 inches wide on each side. The beam sizes were increased to cover the battery on the side. If the beams stayed .045 inches, it would be likely that they would snap under pressure.
Below are the fixed beams
There were uneven beam intersections on a raised area of the cage.
They were connected to be the same height and are even.
Length: 99 millimeters
Width: 49.53 millimeters
Height: 97.79 millimeters
Screws required: 2
Recommended screw diameter: 9.65 millimeters
Autodesk statistics
46 extrusions
95 sketches
Info
School: Melissa High School
Number: #0219
Name: RedWing Tech
Hub: Dallas
#BESTRobotics2025