1 / 5

Vertical V5 Battery Cage #BESTRobotics2025

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mayukh.S

@MayukhS_3916554

Holds a V5 Robot Battery (Li-Ion 1100mAh) vertically, saving space on a robot platform for other components.

Ocena: 0 / 5
Polubienia: 1
Pobrania: 2
Wydruki: 0
Wyświetlenia: 30
Oceny: 0

Aktualizacja u źródła: 20 lis 2025

Informacje o modelu

Źródło: Printables
Kategoria: RC & Robotics
Licencja: Creative Commons — Public Domain

Szczegóły Pliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)

The Vertical V5 Battery Cage is an attachable structural component for robots that will hold and secure a V5 Robot Battery (Li-Ion 1100mAh) in a vertical position. This component addresses the problem of not enough space being available for other electrical components on robot platforms. The design for the cage allows all the input and output ports for the battery to be accessed. The design prioritizes being lightweight, and using vertical space to take up as less space on the robot bed as possible.

It was noticed that the beams were too thin, being 0.45 inches wide on each side. The beam sizes were increased to cover the battery on the side. If the beams stayed .045 inches, it would be likely that they would snap under pressure.