Counting matching models…
I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.
Print approx. €20.82–€25.44 excl. taxPreliminary estimate for one variant
Hello, Banana Bonanza from Stumble Guys. Thanks for your download, enjoy the print!
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Just combinded the perfect models “Little squirrel” from Zeyko and the “Tree stump” from teeeeeee to a very cute new model :o) where you also can put in pens or other cool stuff. it also gets painted soon :)
Print approx. €8.46–€10.34 excl. taxPreliminary estimate for one variant
Please help this little guy hold on to something (and hope). The famed drop-bear, otherwise known as the Koala will do a wonderful job holding your toothbrush or pen or other similar items. I've included the files for you to either print…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Design Concept The Stumpy Christmas Tree Keychain is a festive accessory designed with whimsy and charm. Its compact and cute design makes it an ideal holiday-themed item while remaining practical for everyday use. Purpose This design…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
his is a car overlay/costume for Ozobot Eve. It measures 7,2cm x 3,9cm x 3,5cm. It is the Polish equivalent of the small-capacity car of the PRL "Fiat 126p" You sholud print it with supports.
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
This is a car overlay/costume for Ozobot eve. It measures 7.2cm x 4.8cm x 4.6cm. this is the Polish equivalent of PRL track: "ŻUK"
Print approx. €6.24–€7.63 excl. taxPreliminary estimate for one variant
I change the sizes depending on the plant. The largest print is about 6 inches tall and 8 inch wide. Took 8 hours to print. Smaller sizes take about 4 hours. I Added water drain ring that ties all the drain tubes together in V3 (included)…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
This is a remix of @AndersSeverinsen's Halloween Tree Stump LED Candle , which is a remix of @DanielStein's Tree Stump Pencil Holder . Roughly 140 mm wide, 135 mm deep, and 138 mm tall. Designed to use the pump from a Softsoap brand…
Print approx. €8.63–€10.55 excl. taxPreliminary estimate for PETGSource material: PET
Combined 2 designs in one. Used this one also https://www.printables.com/model/879721-bog-planter-with-moat
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
This is the starting character from Stumble Guys. Great games. It's called Stumble Guys. How he plays.
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a printable bracket for the Stumblor Lolly board used for the glowrails in Jersey Jack pinball Harry Potter. I used layer height 0.15mm and 25% infill. I printed in PETG, but PLA should also be fine. You could also use the…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…
Owl on Treestump, Hexa Sculpture
A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…
The Man of Steel, now in plastic! This is my Superman variant of the Dummy13 figure by soozafone I used the 2x Muscled arm for dummy13 and the Hunky variant This requires a well-calibrated printer and I printed at 150%. The hair has to be…
Yet another Dummy13 Caped Crusader! My Batman has a newly designed cowl, a broad chest, abs, a cape, a utility belt, a batarang, and a holster for the batarang I used the 2x Muscled arm for dummy13 and the Hunky variant Note, all of my…
One of my favorites I'm sure you will agree. I finally got round to upgrading my original Slave Leia Bikini and Bra uploads and a big thanks to the other modelers for their intergrated components into this very hot looking Slave Leia.…
This is a Remix of the tree stump model by Robagon here: https://www.printables.com/prints/12116-stump-for-gloomhaven and the Pinecone by jjp12383 here: https://www.thingiverse.com/thing:3076993 These are fun little upgraded tokens for…
This is a Wendigo / Forest spirit / Leshen (from The Witcher) / Krampus costume set. Now with detachable horns and antlers! It's remixed from other things (see remix sources). ======= SCALE IT PROPERLY ======= UPDATE 2024-09: I have added…
Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…
The Ultimate Cuteness Crossover! Why choose between Pokémon and Disney when you can have both? This Costume features Pikachu dressed as Stitch. Model is designed to be the cutest additions to your desk setup, shelf, or as a perfect gift…
This is a really good looking springtrap wearable suit. looks so realistic that you will scare your friends. its so accurate that you'll get the biggest wave of nostalgia you ever felt. post makes of your scary good springtrap costume.…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
Mr. Stumble - Stumble Guys in low poly!
My son really wanted a Flash toy, so I decided to make a dummy 13 Flash. My model has a new head, with eyes that are inserted in, with a new helmet, and lightning bolt ears. There's a lightning belt and two lightning arm bracers. Finally,…
Christmas baby Yoda - :) No AI was used in the making of this model. The image is a render based on the gcode from prusaslicer. Check it out on makerworld as well if you have a bambulabs 3d printer!…
What do you get when you combine Experiment 626 with the most famous Pokémon? It's Stitch in a Pikachu suit! This adorable figure depicts Disney's favorite alien, dressed in a cozy Pikachu-themed kigurumi (pajama). This is the perfect…
This 3D printed Wolf Mask blends stylized angular design with a feral, predatory edge. The geometry gives it a lean, low-poly aesthetic while still feeling alive—somewhere between a wolf spirit and a demonic guardian. I designed this mask…
I got a roll of wood filament for christmas, but didn't want to print that groot thing, so I sculpted this. Maybe I'll put a plant in it, or store some pen-like items in it. Probably won't drink from it. Does not need supports or any…
Original auf Thingiverse: https://www.thingiverse.com/thing:4933855 Baumstumpf in dem ein LED-Teelicht perfekt platz finden kann. Habe ihn mit Holzfilament gedruckt. Support im Mundbereich nötig falls man einen sauberen Print haben…
Create a mysterious and unsettling look for Halloween with this detailed plague doctor mask. Inspired by historical plague doctor masks and steampunk aesthetics, the design features a long curved beak, round eye lenses, mechanical…
Owls on Treestump, Hexa Statue
Cute woodland desk organizer: a tree stump with a squirrel - pencil holder. Supports are required. I printed it with Fuzzy Skin. The model is to scale it up or down. Powered by Image-to-3D from MakerWorld
Original model posted on Thingiverse by Ill_Drakon (https://www.thingiverse.com/thing:4318289). The original model was posted as a plant pot but I scaled it down and it works perfectly as a resource bowl for Everdell! Printed using a 0.6m…
Step into the magic of the forest with this charming Mushroom Stump Cottage ! Perfect for fairy gardens, tabletop adventures, or cozy shelf decor, this model captures the whimsy of woodland fantasy in every curve and detail. Some…
My kids lost the outer ring on their dinosaur Halloween costume during trick or treating. It happened due to the fabric stretching from around the fan and letting go. I found this print and then modified it to be a larger hold area to…
A great and mighty eagle stretching out those huge wings on a natural stump miniature. Check out all my animals! He is pretty easy to print and tree supports come off easy, see pictures. Use Tree Supports on build plate only. Tree…
A Batman costume that you can fit in your pocket for any costume-related emergency situations. Fits an 18mm wide finger, scale up or down to suite. If your slicer doesn't like the thin walls, try increasing the wall thickness setting.
EDIT - fixed the stump mimic bottom not being flat. Don't sit on it. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other supportless models…
Here is a Lego hand I designed for my brothers Lego costume. I loved designing it. The model has two holes to attach a securing rope/thread, to hang the Lego hands off of your arm wrist. In its original size the inner hand has a diameter…
This trophy uses a fake candle's light to spice it up so it's not so boring to have. I've included an Empty Plate in case you want to emboss a different text. Also, included is the Base without the year on the back so you can print it…
This 3D model features a charming owl perched on a tree stump. A perfect combination of functionality and decorative flair - use it as a pen and pencil holder, desk organizer, or even a small planter or candle holder! The model was…
This is a set of pieces that can be used to recreate the Spider-Man in Black Symbiote Costume figure originally published in 2012 at 500% scale. This is a rare mini-fig that was exclusively available to attendees of the San Diego…
Body ring props Design Description: A set of rings that were designed as costume props only, designed to appear like real piercings for the nose or nipples. These prints are available as STL files or, more usefully, can be downloaded for…
This is a costume bracer for a fantasy outfit -- it looks particularly great with a green tunic and cap. Happy adventuring! Sanded and spray-painted brown for a leather-like appearance. I also used diluted black paint for a…
Cute woodland desk organizer: a tree stump with a hedgehog - pencil holder. Supports are required. I printed it with Fuzzy Skin. The model is to scale it up or down. Powered by Image-to-3D from MakerWorld
This is a very slight remix found on makerworld. I enlarged it to 110% to fit a Labubu easier. I recommend paint on organic supports for the teeth. Did not need any supports for the overhang at the top. Printed with 0.4 nozzle, 0.2 mm…
Here are four different stumps made from real life photo-scans. I processed them using ZBrush to make them suitable for printing. I also enhanced some of the more improtant details through processing and hand sculpting. These are scaled…
Created this stunning PS5 controller stand with realistic quarz crystals. Looks best with two materials. Would be happy to see your makes!
Work in progress! A full Halloween costume/cosplay for Link in the Soldier Armor from Tears of the Kingdom, including the Ultrahand. I made every piece from scratch in Blender based on in-game models. More pictures and more detailed…
My family loves Bluey and wanted something that wasn't made yet. This is a stump, done in the Bluey art style, sized for the official toys to fit onto for pretend play. Prints in one piece, no supports needed. I specifically thickened the…
Crafted to resemble natural tree trunks with mossy accents, this functional woodland-inspired piece is both practical and decorative. Perfect for holding pens, pencils, paintbrushes, or even makeup brushes, it transforms everyday…
This is a simple, easy print, perfect for tabletop rpgs or just a nice desk decoration. features a flat bottom and requires no supports.
An autumn-themed 3D model of a fox sitting next to a tree stump decorated with leaves - perfect as a desk organizer or container for little items. I printed this model using the fuzzy skin option. Supports are required for printing.…
I made this for my son's 2021 Halloween costume. It's an easy print, print upside down with Supports for the eyes. You may have to slice it up and print it in two pieces. This is set to fit a child's head, my son is 7 and it fits well.…
Nothing ground-breaking here. I re-did the hole in the stump as a matter of personal preference, to a single cylinder. I also sliced the bottom a bit to get a flatter look. Base object from Anders644PI :…
Needed both a Princess Peach and Daisy Crown and really liked the Peach Crown Model from FlyAttack. I reproduced the Peach Crown base shape in Fusion360 and added the Daisy Flowers and Gems. The Gems and Flower Parts can be glued in with…
The headband costume is designed in Fusion360. The model consist 3 file (4 pieces). Each part is fastly printed. You can glue the parts together while assembling. The model in fotos is printed on my Prusa mini+ with prusament galaxy…
Detailed greece armor / weapon set Enjoy
The Emerald Knight, now in plastic! This is my Green Lantern variant of the Dummy13 figure by soozafone I used the 2x Muscled arm for dummy13 and the Hunky variant Note, all of my Dummy 13 models are printed at 150% and I doubt you'd be…
A nose. Category: Costume
Further to my BB-8 design, I thought he needed a friend.. welcome BB-9 :-) Print instructions Print with no supports :-)
This is a tree stump animal hide I made for my tarantula. Would work well with other small pets. Printed with supports and then decorated with coco coir and sphagnum moss adhered with silicone.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Couldn't find a Jeff the Shark STL so :)
printed whit 2mm the pegs aren't necessarily for joining the crystal to together but are to help aline the two halves if glueing. be careful when screwing the Crystal into the beam as it as snapped on me after it got stuck. I have…
A nice tree stump pedestal for your Echo Dot 4. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Remixed from:…
Please click ❤LIKE❤ if you appreciate my work 😊 Bring a haunted forest to your Halloween display with this scary tree stump LED candle holder — available in three sizes: 73 mm, 145 mm and 210 mm . Twisted roots, rugged bark and a sinister…
This is a pair of "Neck Bolts" for a Frankenstein('s Monster) costume. Instructions Print in a silver or grey color, or paint the "bolt portion" to look realistic, if desired. I advise against painting the disc portion at all, especially…
stumble guys - logo + head keychain PLA
Evil pony ears and unicorn horn for My Little Pony Queen Chrysalis or Dark Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Wednesday…
Update: I resized the item to be near a target of 50 mm for height and decimated the mesh to make it easier on the download.
This is an easy to print, and fully functional Alien Chestburster Halloween custom. You just need to print the mechanism and the head, clip together, take a belt and knot a fishing line or in my case a Waxed Denteal Floss onto its place…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Hello Kitty dressed in an adorable dinosaur costume – a…
Emillia Halloween Costume. RE: Zero Hajimeru Isekai Seikatsu series. Emilia (エミリア) is the main heroine of the Re:Zero kara Hajimeru Isekai Seikatsu series. She is a half-elf and a candidate to become the 42nd King of the Dragon Kingdom of…
I made these Wonder Woman cosplay bracelets off this film still: Includes blender file. Version 2.0 is optimized for 3d printing to use fewer supports. They're also chopped up so you can add a strong fabric backing and a clasp/velcro.…
I remixed the original log to create a hollow tree stump cave for my snake. The model requires supports. I dont have an .stl file since i added the entrance in prusaslicer with a negative volume.
Scalable - No supports stand/pillar for miniatures or sculptures. No Supports Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
3 Halloween Costume Trophies with and without text. You can use any liquid paint to paint over the text so it fills the creases and wipe it off so the text is more clear. I used a liquid chalk pen to draw over it and it makes a huge…
stumble guys - change color logo keychain
Keep your stuff safe in this tree stump container, with lid! There are multiple versions, one with finger notches for the lid, and one without. I print mine with 2 different brown colors. Darker for the stump and lighter for the lid.…
For a satyr/faun/goat person costume. I took a 3D Scan of a real Horse Hoof specimen from the lab and edited to fit it around a shoe. I've also included the original hoof model for general remixing use - Enjoy! Category: Biology
Detailed viking weapon / armor set Enjoy
A decorative 3D model featuring a frog sitting on a leaf beside a tree stump. Important: Make sure to scale the model to fit your specific needs before printing - it can be easily resized in your slicer software. Powered by Image-to-3D…
A simple model for the bamboo of Nezuko Kamado from Demon Slayer. My daughter is dressing up for Halloween and the one included with her costume was pretty bland. This has a cutout to make it comfortable and a hole to tie the red ribbon…
Nothing out of the ordinary, print the buckle, 2 loops, glue everything together, paint it if you want to.
Source: https://www.models-resource.com/pc_computer/narutotoborutoshinobistriker/model/61268/
This model is compatible with the lego system.
This model is compatible with the lego system.
Modified this claw file so that it can be used on costume gloves for realistic dromeosaur talons. Recommended Print Settings: You'll want to print this with support and at a low layer height for the best results. The file should fit fine…
Egyptian Anubis King, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Repetier couldn't handle the amount of detail on the original so I decimated it to have have fewer polygons. You can see the low resolution and high resolution side by side in one of the pictures. It is bigger then I thought, you can see…
You'll eventually stumble upon these ancient sentinels, the hollowed-out remains of trees that have stood for millennia. This isn't just a dead stump; it's a Glow-Wood Stump. It's been infused with raw Juice from deep beneath the Mire,…
I designed this rear mudguard to suit my Specialized Levo Comp Alloy (2022 “Gen 3” model). It also happened to fit my Stumpjumper EVO Comp Alloy (2023 model) nicely as shown in the photos. It's printed as 2 parts, and I recommend printing…
Here is a project I have been trying to finish for over a year and finally took time this week to complete it! Here's a video of me developing the final model and assembling it if you're interested! https://youtu.be/fmwzp5fW4YE For…
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! This kitty hides under a seamless printable ghost drape, with only their little eyes…
This model is compatible with the lego system.
![Moving Alien Chestburster Halloween Costume [No Support, Easy Assembly]](https://media.printables.com/media/prints/14080/images/127156_13aad499-5a78-468b-8207-855f639129f8/20171031_001252_14080.jpg)
