81 models
TAPA PRECARGA DEL RESORTE CON ESPACIADOR PARA ENDURECER LA COMPRESION SPRING PRELOAD CAP WITH SPACER TO HARDEN COMPRESSION
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
This is a remix of the really nice case by @Dsk001 . The original can be found here Alien3D Deck This remix has changed the following: Changed to using inset M3x12 socket head screws Removed logo(s) (I needed a cleaner look) Cleaned up…
Unfortunately this display has the USB-Micro plug at the bottom (or top if you want to rotate), so one stand is very big in order to accomodate. You can use the smaller one if you purchase a usb cable with a 90deg micro connector* The…
I have got this amazing and cheap (<20€) board sporting an esp32, 3.5 TFT, multicolor LED, SD-card reader and many connectors for audio, sensors... But it is a development board, and unfortunately a nice enclosure was not available. As I…
A spanner to remove the threaded inserts at the top of your Suntour MTB forks for maintainance
For remove Suntour fork top cap. Three size (28, 29, 30 mm) available in a foldable form. The last one (30MM) is usable with a ½" torque wrench. ---------------------------------------------------------------------- Easy to assembly!
Like the original, but faceplate with rounded corners and even frame width
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
I designed this tool to remove the top caps on my entry level Suntour fork.
Replacement lever for the lockout lever on a Suntour Epicon suspension fork. (Fits many other Suntour models as well) Designed for a friend's bike. Fits nicely onto lockout gear and snuggly into o-ring seal.
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
A tool to remove the preload adjustment knob on Suntour mountain bike suspensions like the Suntour XCT V3
simple housing for this display+esp32 and a rotary encoder I used that knob: https://www.printables.com/de/model/166841
Modified backplate with larger clearances
The display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes. The base has to be rotated 90 degrees for printing. No supports needed. This model is for boards with both Micro-USB and…
Sunton ESP32S3 8048S050C 5.0" Screen Case https://www.aliexpress.com/item/1005004952694042.html I printed in PETG. All credit for the original design goes to marcusone
The display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes. The base has to be rotated 90 degrees for printing. No supports needed. This model is for micro-usb only boards. If you have a…
Mounts your Headlight to a SR Suntour Suspension
This enclosure fits around a 2.8" Sunton display. I designed this enclosure because I want to use the display with openHASP . The enclosure fits the display including a SD-card. The lid of the enclosure simply snaps into place and…
Hi, I designed a removal tool for the suntor NRX 7600 for the Plastik Cap. Printed in PLA, 45% infill, 6 perimeters. Works well on a ½ inch tool. Best regards, Diego
A tool to remove the top cap or adjust the preload on 32mm SR Suntour coil forks. The preload can get seized over time and so, to improve leverage, there is a 5mm hole to put a hex key through to extend the handle. The tool number for the…
I was unable to find them anywhere to buy, so I replicated them. Use only if necessary and at your own risk. But they work just like the original in my friend's fork. You can print them with flexible material so it'll be like the original…
The lockout cap for my bike came off and the gear key fell out and only found the cap so I had to make a new one No supports 100% infill
This socket is specifically designed to work with SrSuntour forks (for top cap removal) and a 1/2" wrench.
This is a replacement clip for sr suntour forks and possibly other forks as well. Mounting requires an M4 Bolt. At the end are pictures of the part it replaces. Printed in Prusament PETG Galaxy Black with 0.24 mm layer height and 0.4 mm…
A remix (my very first remix!) of the original STL file created by @cmh_13634 for the SR Suntour fork top cap to accommodate a smaller ¼ inch socket wrench. Remixed the design in Tinkercad, which is why some surfaces are not as smooth as…
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset. The holes for attaching the chainguard are 110mm and 120mm apart. You will need 4 around 5-8 mm long M4 screws with countersunk or very flat heads. I already printed…
I had to service my suspension - so I created this part and some "just for fun" stress analysis. Perhabs someone can use it. I printed it in PET-G, but I guess ABS will work too. Category: Hand Tools
Upgrade your front suspension setup with this clean, rock-solid bolt-on fender adapter designed specifically for SR Suntour 34 forks. It completely eliminates the need for messy plastic zip-ties, giving you a clean, factory-integrated…
A remix of @kiklhorn s Display Case I made the case symmetrical and tried to make it as basic as possible.
Just a forks protector for my bike rockrider 540 with suntour sxr 120mm Category: Sport & Outdoors
this SUNTOUR mud guard is only meant for the SR version. you will need a small screw and a nut to install it.
The Suntour XCR 32 rebuild kit includes the seals, but no tool to press them into the fork. This tool is the proper diameter to fit around the top of the seal and set it using a rubber mallet. The tool overhangs the outer edge of the…
Updated model of the Suntour Command Shifters. It's currently just a friction lever. I'm hoping that someone can spare enough time to pick up where I left off. There are many issues & improvements that I'd love to fix/add, which would…
My lockout lever was just gone one day so I decided to make a replacement for the specific one.
I created this mount, as my Suntour NCX-D (Through axle, air) front fork does not have fender eyelets and instead have 2 screw holes about midway up on the fork. Unfortunately the fender came with stabilizer rods that are too long to use…
Tool to remove SR Suntour top caps for service. Changed to a 3/8in square drive, and added wrench flats for adjustable
Was servicing an old bike, noticed one of these missing. Quickly measured and printed my own. works great, my brother uses the bike to commute and do some XC with it and its holding up.
The original SR Suntour lockout lever on my son’s bike was stolen. This replacement fits flush into the suspension fork opening and can’t be removed without tools – ideal theft protection.
I printed it in TPU because I wanted it to be a little sticky/elastic to have a tight fit and also for temperature resistance. You can adjust the tightness of the fit by simply scaling the model in your slicer software. I provide you both…
Spacer for reducing fork travel on air spring forks One space reduces 5-10-20-30mm Spacers are stackable Compatible with air forks that use a coil negative spring Is not compatible with EQ Air Spring forks Compatible with the following…
Lid with wall-mount for Box for Sunton esp32-3248S035 board
Na rozebraní vidlice SrSuntour
This is just a simple remix to change the screw holes for M2 x 10mm long screws I already have.
This is replacement for release lever of remote lock used on SR Suntour Epixon 2015 MTB fork which I have snapped in crash. The lever shape donť exactly follow original. It is little longer, so whole assembly can be twisted little bit…
Spare part wasn't available to buy, co made it 3D printable. Source model at OnShape https://cad.onshape.com/documents/82bf2349bfc603cbfc6122d3/w/34f4549633724f1143986806/e/2edb4c230d39882583ee05f5 Print Settings Printer Brand: Prusa…
two different wall mounts for Sunton 7-inch Display from Andy40 / Thingiverse https://www.thingiverse.com/thing:5942782
SR Suntour Raidon 34 has 32mm inner diameter, which does not fit official Apple Airtag (slightly!). I've found these knock-offs on AliExpress and they both fit and work quite well (not as well as official AirTag, but better then nothing)…
SR Suntour XCT JR Cap - often found on teen bikes with 24" tires and smaller. This cap is just a dust cap on the left side.
Tool designed for disassembling SR Suntour bicycle forks. This socket tool securely grips the fork nut and features standard ratchet attachments for easy operation. Available in three drive sizes to fit your existing tools Perfect for…
I do not use the remote lock mechanism on my fork, so I removed the remote and printed this cover instead. For reference, here what has been removed from the bike:
Added V2, for fatter front tire 2.3in is close to rubbing so this allow it to expand more in the fork, removed one zip tie hole as three on top not needed. Added two zips each side though for the side mount. Slight form redesign. Added…
Sunton 7" Display with hangers
print in place 100% infill.
I bought an e-bike so I could keep up with my kids NICA team. I broke my fender on my first trail ride. I figure that it might be better to print replacement parts since I can, rather than spending 10-20 times as much to replace them…
I hated how the Suntour Command Shifters are impossible to get & no good mass-produced version is offered. I never used them, but they look very intuitive & like a good design. These are Inventor files, not Solidworks as I'm used to. I…
These adapter was neccesary because the local shop only had a 30mm mounting for a light which fits un the Suntour Fork. With this little thing you are able to use the longer mount delivered with the Busch&Müller Lumotec light. pinted on…
Note that this is the narrower 20mm tool with 10 teeth, used for a cross bike (the larger 12 tooth tool is for mountain bikes).
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
Didn't spot a lockout here for these line of forks and I never use or even wire up the lockout on my forks. still testing. Category: Sport & Outdoors
Adaptor for Suntour forks to receive a touring mudguard. Printed in PETG with 30-50% infill.
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
Teeth inside/outside diameter: 20/24mm (for Suntour CR-8V)
SR Suntour SF13-XCM bicycle fork requires frequent maintenance, when used in hard conditions. Stock dust seals offer next-to-no protection from water and sand, so these polutants find their way into the fork, reducing it's lifespan, and…
No special requirements on this print. There is no support needed and I printed it in PLA with 5 perimeter walls and 20 % infill to be strong enough.
Headlight mount for SR Suntour NX1 fork. Will probably fit also NEX fork but not tested.
This is a case I made to incorporate my 4.3" display as a keypad on my gate outdoors. It has a big “belly” so you can have your necessary components inside. I have: LM2596 buck converter on top 3.7V battery, small BMS with 5V output, PNP…
Designed for a Suntour SF7-NEX-4000 Should fit most forks with 25.4mm stanchions if your measurements are: - Stanchion inner diameter: 22.4mm - Cap outer diameter: 23.2mm Design files are fully parametric to fit any fork at onshape :…
Small shim for using modern brake cable housing with 80s/90s Suntour brake levers designed for oversized, 6mm housing. Only testing with Suntour XC “Multimount” levers, but it should work with similar Suntour products of the time that…
print with 0.2 layer height
This is a Remix to the previous model, making it the improved Version 2: - better screwholes (not breaking anymore) - added spaces for sensors HLK-LD2410 (NOT HLK-LD2410C or any others) - added space for BH1750 Light Sensor - overall…
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
SR Suntour SF13-XCM bicycle fork requires frequent maintenance, when used in hard conditions. Stock dust seals offer next-to-no protection from water and sand, so these polutants find their way into the fork, reducing it's lifespan, and…
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
