88 models
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
A 3D printable clip to improve the comfort of wearing a surgical mask for a long time Print instructions Why COVID-19 caused a shortage of surgical masks (face masks) ( archive.org link ) and hospitals are having a hard time replenishing…
Summary These Compliant Grippers were created to further technological refinement in Minimally Invasive Surgery(MIS), offering the advantages of reduced wear, assembly, and recovery time. An example of a simplified compliant mechanism…
Plegable surgical mask case. No supports. Easy print. Insert pin into the hole. If pin don´t fits perfectly -due to tolerances at print-, glue (with cianoacrilato if possible) the plain side of the pin into the hole. If plate adhesion…
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
Comfort Clip for a surgical mask. 5 possible lengths from 3 sets of hooks. Designed to wrap comfortably around the back of the head and meant to be printed in PLA or other rigid material. Print instructions This should print in PLA…
This is a fast printing surgical mask strap based on the original design found here . One of these prints in 4 minutes. Eight print in 27 minutes. The changes are mostly: constant wall thickness of 3.3 mm one extra hook on both sides…
A remix that removes most of the material. it is a remix of this design https://www.thingiverse.com/thing:4249113 Print instructions .3 mm. Print settings are for a I3 MK3S Slicer Version 2.1.1 ~14 minutes for the full cut ~16 minutes for…
Working vascular clamp for surgical training.
This is based off of the NIH surgical mask comfort strap designed to hold the loops off of the ears. https://3dprint.nih.gov/discover/3dpx-013410 and https://www.prusaprinters.org/social/1755-eric/prints This needs to be printed at: 0.2…
TORNATO DESIGN - designed to block off any water droplets. This is a filter capsule that utilise surgical mask and able to use 1 standard Surgical mask up to 16 times. If you are able to cut the surgical mask equally into 16 circles (38mm…
I designed this for use by Nurses and Doctors during this current Pandemic. The idea is that the user can hook both bits of elastic onto the grip at adjustable distances. I've been printing these in bulk using TPU filament, allowing them…
Español: Estuche de mascarilla quirúrgica plegable con imanes. Se necesitan 4 imanes cilindricos de 8x3 mm English: Foldable surgical mask case with magnets. Four 8x3 mm cylindrical magnets are required
New version! Check the filenames! Changes from v1 to v2 (check the picture with blue numbers) : Reduced the ventilation holes from 3 to 1 to facilitate cleaning the case with isopropyl alcohol. Increased the length of the hollow of the…
This is a re-mix of Panda Props original design- Thank You Panda Props Many custom text options for KC/STL and med industry Print instructions This is a re-mix of Panda Props original design- Thank You Panda Props Changes scaled to 7 3/4"…
Will not slip off position Completely protects ears from elastics Masks can be put on and removed with one hand Holds masks more tightly to your face Ideal for people who must wear masks hours at a time. Video overview is here:…
Very minimal surgical mask grip made in TPU/TPE. Works well. Very comfortable. 13.10.2020 update Thicker Print instructions Print in TPE 90A or TPU, 0,25 layer, 225C°, 60C° bed. No support, no raft, skirt yes. For any issue, write to me,…
I am going through Cardiac Rehab, and wanted a way to give back to some of the nurses in this time. This is a remix of Surgical Mask Strap Remix by Suraky , but I have tried to incorporate the honeycomb pattern found at…
This wall-mounted mask dispenser makes it easy to store and retrieve standard surgical masks. Mount it near your front door and never forget a mask when you go out again! Fits 20-25 standard surgical masks. Instructions Print: 1x body…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are some ear savers that…
I created customizable hook/holder for Surgical Face Mask. Its open-source and FOR EVERYONE!!! I recommend to measure the size of the head between the ears +2 cm as atribute "velikost" and change atribute "delka" for right size cut.…
"These are "Ear Savers" that PandaProps designed for health care providers to use. These are for installing behind the head of surgical masks, to remove the strain of the elastics behind the ears which can cause chafing and soreness. I…
Knot wizard is a surgical knot tying practice kit. The book-like shape allows it to fit in a white coat pocket to be easily portable. It can also store suture thread material for practice and scissors for cutting out tied knots. The…
As "normal" printed straps (fishbones type) would only allow to print 9pc at a time, I searched for a way to increase my batches to 50 pieces. The Thingiverse thing from veno0msho inspired me and I did: implement batch generator based on…
Surgical masks are easy to find but offer limited protection. One of the issues is air going through the gaps to the side of your nose, cheeks and chin. Use this frame to better fit the surgical mask to your face, closing those gaps. I…
This design allows the use of Bard-Parker surgery blades. I have tried size 15 and 10 and they fit great now. We use these cutters a lot to open boxes for supplies and implants. If you work in surgery or any related field, you know we…
A different versions of very minimal surgical mask grip made in TPU/TPE. Works well. Very comfortable. Print instructions Print in TPE 90A or TPU, 0,25 layer, 225C°, 60C° bed. No support, no raft, skirt yes. For any issue, write to me,…
This is the Surgical Mask Case for temporary storage.
This is an"Ear Savers" originally designed by https://www.thingiverse.com/PandaProps To be installing behind the head of surgical masks or FFP2 masks, to remove the strain of the elastics behind the ears which can cause chafing and…
It's better to print it with PETG because of flexibility but PLA work also ! I print it with 0.2mm layer height
Filter replacement for 3M respirator using surgical mask. The filter area is 50mm x 42mm, double the area of original rounded adapter to make breath easier. One surgical mask can be cut into 9 pieces for being used in this adapter. Print…
I print it with a raft but I think it's possible without if you want to save approx. 10min and 3g of PLA
Surgical Mask Strap Please download and give it a like! :)
This is a model developed as part of an academic project. It has been tested and optimized for FDM printing with PLA filament. The added gcode is for use in a Creality Ender 3 V3 KE.
This remix was made to increase the length of the face mask strap extension. Some of the masks that are being made have elastic bands that are a little smaller due to design differences. My wife has made at least 50-60 cloth masks to…
The model is made up of 3 parts, a harness to hold the spool and capture the thread when not in use, a spool, and a cap. The harness (file “Spool holder”) is a container with a hole on a side to allow for the thread to go through, and a…
Simple TinkerCad remix of https://www.prusaprinters.org/prints/36398-foldable-surgical-mask-case by imakina that allows the use of 20x5x2 neneodymium magnets to ensure secure closure. I used PETG and have not tried PLA. Just superglue the…
So we are going back to work as volunteers at the hospital and now we need to wear masks all day while there. Started to getting sore ears so i looked for a strap to use. I kind of liked the version used below but it was still too bulky…
This remix extends the original design by adding one link on either side. Print Notes: Filament: Ninjatek Cheetah TPU White or other 95A TPU Category: Accessories
This is a 3D model of surgical guide for removing part of bone with patology.
One size fits all. Print Settings Printer: East3D Gecko Rafts: No Supports: No Resolution: 0.25mm Infill: 20% Filament: ESUN PETG Solid Purple How I Designed This Category: Tools
This is a remix. Source: https://www.thingiverse.com/thing:4266293 Added an area to level out the hooks for a smother printing experience (for crappy printers) Print Settings Rafts: No Supports: No Resolution: 0.3mm Infill: 100% Filament:…
Design to wear with chirurgical face maks all day with smooth edges that will not scratch your skin. Designed to be printed with TPU at 0,2mm fisrt layer height and 0,15mm layer height for the remaining of the print. Then it is exctly 11…
Surgical Mask Ear Protector fits small print bed. Category: 3D Printing
Simple, adjustable and unobtrusive band. This product reduces "ear pain" caused by wearing the surgical mask for a long time. Feature ・The parts are small and the threads are transparent so they are not noticeable. ・It can be used by…
I used 0.15mm tolerance on each face, and it is a tight fit. Printed with PLA on 0.2 layer height.
This is a surgical guide for resection of mandibulae. Attachable to the 3D model of mandibulae
This is an ear saver designed to be printed on 20x20cm bed at 45 degrees (large). It is much more comfortable than the smaller ear savers that grasp onto the neck. The two arcs fit naturally to the head and stay in place while moving. It…
🇬🇧 EN (auto translated): I made this remix because I wanted to make the strap thinner because it wasn't flexible enough and shorter because if you have a small head (like me) it's just a waste of time and material. 🇨🇿 CZ: Udělal jsem…
Another Ear saver. I know everybody is making one. However, You can get 11 on an Build plate the is 220x220mm and print in 110 Minutes. The down side is you need to be at the printer every 110 Minutes. I have not had much luck stacking…
Simple Surgical Mask Clip. Seen on Twitter and do not know the original author to give credit to. Modeled in Fusion 360. STEP file included. Category: 3D Printing
The UFix System External fixation is a common technique for treating bone fractures , however commercially available systems remain prohibitively expensive and reliant on complex supply chains, which causes significant challenges in…
This is a remix of a remix, after having my wife test the original and the original remix, she determined that the thickness and flexibility of the remix, and the length of the original were the best mix so I made it happen. :) Category:…
A basic stand with some hooks that I made for my wife to dry her veterinary surgical instruments. I also used the same design to dry pasta successfully.
Remix of Surgical Mask Strap Remix by Suraky. Added a fifth set of tabs, removed some unnecessary material, and added the message "SCIENCE IS REAL". Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes…
"Ear Saver" or strap for a surgical mask with the Black Panther logo. Because we're all heroes. For a child size ear saver, use the strap and clip files with "SHORT" in the name. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2…
These are simple clips intended to help keep surgical instrumentation jaws open during sterilization, based on some existing clips I saw at a previous job in central sterile processing. The included .scad file allows you to edit the…
Printed in Basic PLA 0.2mm Layer Support: Yes (Tree) Adhesion: Brim Infill: 20% I resized it to 263.73% ! This development uses the library here present, which I make credit: https://makerblock.com/2025/03/openscad-3d-printed-spring/
https://www.thingiverse.com/thing:4249113 This remix is Identical to the original design shared by @suraky This design includes a little strength improvement in the middle part preventing it from breaking. Print Settings Printer:…
This remix is for laser cutter owners. It should be much quicker to produce and lighter. Great results have been had with 1mm thick petg, lenstar (…
Disegnato con Fusion 360, ho usato gli agganci in modo che il laccetto della mascherina non si sganci subito quando la si allenta. Inoltre è molto sottile, spessore 0,70 mm Stampato in PETG quindi molto flessibile. Primo strato 0.20 e gli…
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
Been keeping my co workers supplied with surgical mask straps, but was tired of having a pile of them messing up the place. Threw this together quick. No supports, 20-30% infill. Print Settings Printer Brand: Creality Printer: Ender 5…
This fun pen holder is designed as a surgical scrubs top, complete with a face mask hanging at the neckline, hands tucked into the sides and two front patch pockets. It keeps pens, markers, highlighters and scissors organized while adding…
Just a simple design intended to be printed in vase mode/spiralized outer contour/etc as an imitation of standard tip protectors used during sterilization of surgical instruments. Required holes are included to allow steam/vapor to enter…
Inspired by the general structure of various coin sorters, this simple model was designed to keep my dilators from falling over on my nightstand. The four slots are sized to hold dilators with diameters of 1 1/8", 1 1/4", 1 3/8", and 1…
Simple remix of a surgical mask ear saver with the team instinct logo. Printed with Black PLA for 1 mm then switched to Yellow PLA. Custom Section Category: Accessories
We've been printing mask straps at Montcalm Community College, located in Sidney and Greenville Michigan. Added the MCC logo on recommendation. V2 MCC logo added to my mask strap design. V3 has logo cutout rather than added to open area.…
Added bevel to the edges where straps attach. Some of my PLA prints where breaking at those edges. This solved the issue This SLT includes 4 different lengths 6 straps total for my 200x200 print bed. Print Settings Printer Brand: Wanhao…
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
The modified version is the bottom one added holes to reduce printing time and material. Time roughly 30seconds a print but if your doing a large volume of 100 that's around 50 minutes and a load material saved. This is linked to the…
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels for anterior cruciate ligament (ACL) reconstruction with screw post fixation. In this technique, the graft sutures are tied around a…
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels for anterior cruciate ligament (ACL) reconstruction with cross-pin femoral fixation. In this technique, a transverse pin is passed…
This is a holder for the surgical mask straps designed by Surakey. It can be attached by a medium sized command strip.
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels reproducing the outside-in technique for anterior cruciate ligament (ACL) reconstruction. In the outside-in technique, the femoral…
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels reproducing the transtibial technique for anterior cruciate ligament (ACL) reconstruction. This model is part of a series of knee…
## What is this? A 3D-printable knee model (distal femur, proximal tibia and fibula) with pre-made bone tunnels reproducing the LaPrade technique for anatomic posterolateral corner (PLC) reconstruction. The technique reconstructs the…
I made this project at the start of the pandemic, keeping it as a reminder This is an EMERGENCY mask to prevent others from being infected by YOU (If you have the symptoms) IT'S NOT 100% SAFE, NOT BACKED BY SCIENCE USE AT YOUR OWN RISK…
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/a2aGAWtbXFT Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Infill: 20 Filament: any pla Category: 3D Printing
This project showcases a low-cost surgical-style plier designed to be fully 3D printed without any screws.
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone sockets reproducing the all-inside technique for anterior cruciate ligament (ACL) reconstruction. In the all-inside technique, closed-ended…
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels for combined anterior cruciate ligament (ACL) and anterolateral ligament (ALL) reconstruction. In addition to the ACL tunnels, the…
This is a holder for the surgical mask straps designed by Surakey. It can be attached by a medium sized command strip.
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
