Counting matching models…
Scalpel Cover of Swann-Morton No.3 Handle with 10A or 11 Blade . Not yet tested No.11 Blade, would be grateful if someone was able to confirm compatibility. Affiliate Disclosure : As an Amazon Associate I earn from qualifying purchases.…
Swann-Morton Scalpel No.3 with #11 Blade Cover Caps. Included 2 versions (Spitted and Full). The split version can lay flat on a printer. So it can print faster and a lot easier. The parts are also stronger when printed this way. But they…
Made for Swann Morton no3 handle scalpel. Might fit other brand but I don't have them so I can't be sure. Two versions: Single to just push the blade out. Box to extract and collect the blade in a sealed container. (you can't retrieve the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model holds up to two Swann Morton (or similar) scalpels, and has space for extra blade storage too. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the front end up for easier access.
Simple, quick printing cap for a Swann Morton No. 3 scalpel with No. 11 blade. The cap is designed with a built-in catch and retaining spring to ensure it doesn't come off inadvertently, though can still be released easily using one hand.…
Print vertically. Its a tight fit and can be adjusted with a small round file. I made it tight because you don't want it coming off. I tested it with an #11 and #10A blade.
Re-design the interior to fit #10A blade. Also fits blade #11. Related Links:: Swann-Morton Blade extractor More Info about this design Filament I Use:: eSun ABS+ (Fire Engine Red and Black) My Channel: YOUTUBE CHANNEL:…
Gridfinity box for two Swann-Morton scalpels and some blades
This terribly clever blade extractor was just begging to be remixed and merged with a cover, so I did just that. Print it vertically and you can loosen the support using the holes at the end. Category: Hand Tools
Just increase wall thickness and add some clearance to fits #10A blade. The original design from M600 . Notes:: I print with some brim to increase first layer adhesion. I only test with blade that I have (#10A and #11). Filament I Use::…
Holder for my favourite slicing apparatus - Surgical Scalpel Handle Number 4. Also holds foil packets in the large pocket and individual for the individual blades (no. 26 for the win https://www.swann-morton.com/product/45.php ) 1x5 grid…
Personally wanted a more rounded design. Remodelled in Solidworks as the original file wasn't available, and corrected some of the internal faces while I was at it. Single piece, no support required. Print vertically with the opening for…
This is a mashup of the holder layout compiled by strelly and the base from zk101's 1x4x3 bin https://www.printables.com/model/184201-gridfinity-plain-bins/files (I glued a plastic leather wrap around the scalpel handle for grip. Highly…
This is a compact sliding handle for Swann Morton SM01 heavy duty craft knife blades. It makes a nice pocket knife. It is much slimmer than the ones using Stanley utility knife blades. The slider is asymmetric to accommodate to the shape…
Stickers normally come with Swann Security packages to place around the house, but they don't last long so i remade made one in Fusion 360 to place in the windows. Could be placed outside around the house if you use the right filament.…
A simple craft knife handle for readily available Swann-morton SM01 scalpel blades. Suitable for light to moderate duty work. The handle body has a pocket large enough for a couple of spare blades. Additional parts needed: 1 - M4 x10mm…
A basic Gridfinity 4x1 box 3u high to hold a Swann Morton Retractaway scalpel handle. Also a copy of the blank used to boolean out the slot in Blender so you can use it to add a slot to whatever you want. Scale up to taste for clearance.…
The Swamn Morton #6 handle is a bit unusual. It is equivalent to the #4 scalpel, but, in my opinion, the handle is more ergonomic. It can be stored with a #23 blade (keep in mind that an uncapped blade is always dangerous). The "optional"…
Blade extractor for Swann-Morton N°3 scalpel
Skadis-mount to hold the Swann-Morton ACM No.2 craft knife. Keep it safe and out of harm's way. Printed with PLA+, vertical with support for the single Skadis hook.
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. I prefer to use the Swann-Morton scalpels with thicker acrylic…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. I prefer to use the Swann-Morton scalpels with thicker acrylic…
Einfacher Ersatz für einen defekten (gebrochenen) Gewindestopfen eines alten Öl(wechsel)behälters. Im Bild ist der grüne Stopfen das Originalteil, in schwarz der simple Ersatz (die Dichtung war noch brauchbar). Der zweite Stopfen lässt…
The Swamn Morton #6 handle is a bit unusual. It is equivalent to the #4 scalpel, but, in my opinion, the handle is more ergonomic. It can be stored with a #23 blade (keep in mind that an uncapped blade is always dangerous). The "optional"…
Pirates of the Caribbean - Elizabeth Swann (Keira Knightley) 3D printable model.
Needed 5” ears for Swann DVR, mounting holes will need to be made in side of DVR case. This is still a work in progress
Scalpel blade cover for Swann & Morton No.10 Blade How I Designed This Using the original STEP model for the 10A blade cover I used a No.10 blade image for reference to modify to suit. Category: Parts
Just a holder for 2 swann-morton knife holders Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs Print in 2 colors for that extra stunning look! Printersettings: I printed in PETG 0,15mm layer…
