Scalpel Cover for Swann No.3 Handle and Blade No. 10A
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimised Scalpel Cover of Swann-Morton No.3 Handle with 10A Blade
- Rating
- 4.923 / 5
- Likes
- 134
- Downloads
- 725
- Makes
- 14
- Views
- 2,056
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Scalpel Cover of Swann-Morton No.3 Handle with 10A or 11 Blade. Not yet tested No.11 Blade, would be grateful if someone was able to confirm compatibility.
Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. The product links below may be affiliate links.
I wanted a lid for my scalpels, so they could be safely stored. I wanted something that was simple, safe, with a secure fit and used minimal materials. After printing several designs, I wasn't happy, so designed one for myself. It isn't as fancy as other designs, but in my opinion it works better.
NOTE on Handle Thickness
I have found that not all No.3 Handles are the same thickness. Please measure your handle between the grip and the blade, and select the appropriate cover for your handle. So far I've found they either measure 4.1mm or 3.8mm thick.

Print Settings
Nozzle: 0.4mm
Layer Height: 0.20mm
Infill: 25%
Orientation: Print upright with opening down
Supports: None Required
Brim: 5mm Outside Brim
Material Use: 3.29g
I hope you find this model useful. If so we would love it, if you can give us a LIKE. |