1 / 4
Scalpel Cover for Swann No.3 Handle and Blade No. 10A — zdjęcie 1
1 / 4

Scalpel Cover for Swann No.3 Handle and Blade No. 10A

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Optimised Scalpel Cover of Swann-Morton No.3 Handle with 10A Blade

Ocena
4,923 / 5
Polubienia
134
Pobrania
725
Wydruki
14
Wyświetlenia
2062
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scalpel Cover of Swann-Morton No.3 Handle with 10A or 11 Blade. Not yet tested No.11 Blade, would be grateful if someone was able to confirm compatibility.

    Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases. The product links below may be affiliate links.

I wanted a lid for my scalpels, so they could be safely stored. I wanted something that was simple, safe, with a secure fit and used minimal materials. After printing several designs, I wasn't happy, so designed one for myself. It isn't as fancy as other designs, but in my opinion it works better.

NOTE on Handle Thickness

I have found that not all No.3 Handles are the same thickness. Please measure your handle between the grip and the blade, and select the appropriate cover for your handle. So far I've found they either measure 4.1mm or 3.8mm thick.

Print Settings

  • Nozzle: 0.4mm

  • Layer Height: 0.20mm

  • Infill: 25%

  • Orientation: Print upright with opening down

  • Supports: None Required

  • Brim: 5mm Outside Brim

  • Material Use: 3.29g

I hope you find this model useful. If so we would love it, if you can give us a LIKE.
You can also follow us on our YouTube Channel here.

Tagi