Counting matching models…
Helicopter rotor assembly with turning rotor blades and adjustable pitch / collective. A great model (thanks to the original designer) which, after considerable time and tinkering, is now easier to print and fit together. Printing :…
Recently as the result of a freak accident, the knob to my Brondell Swash Ecoseat broke. In a rush, I quickly printed off the first and only knob I found and used that temporarily. Alas, I found myself dissatisfied with the feel of the…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
It's a replacement knob. You can optionally remove and use the metal knob-ring from the old knob (see pictures). Should fit nicely with a well calibrated printer. If you find it's a little loose (or tight), adjust your print extrusion…
Helicopter swash plate based off of a GE5C bearing. BOM GE5C Bearing x 1 15x32x9 ball bearing (B6002RS) 3mm ball studs x 7 (use tap on the holes) known issues: No FEA Release Notes v5 - Fillet/Chamfer lower portion of top plate for main…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
A mighty owl-man buccaneer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
Set sail for adventure with the Skeleton Pirate Giant Minifigure! This 16-inch (10x scale) undead buccaneer is an expansion of the Skeleton Giant Minifigure, featuring classic pirate gear for the ultimate high-seas haunt! 🌊👻 🏴☠ Model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Helps you to level the swash plate on the goosky rs4 heli
I created this model for one of my players in my D & D game. He wanted a Tabaxi Snow Lepard Rogue. I printed it on my Endor 3 using Voxelab pla at 220 degrees. Sliced it in Cura. My resolution was at .008 using supports and a raft and 20%…
Not much to say if you know what it is. I checked for flat against some glass and it seemed good. I printed in PLA, and used some supports for the center.
I designed these to help me level the swashplate of my OMP M1 helicopter. The zero pitch tool allows you to set the blade grips at 90 degree to the main shaft for setting zero pitch. The swash levelling tool helps copy that level to the…
I wasn't too pleased with the stock swash leveling tool that came with the kit. So I designed this one to give it a better footprint instead of sitting on top of the locking collar I printed it out @ 10microns layer. It will require…
3D printed swashplate leveler. Handy tool to setup proper geometry of RC helicopter main rotor head. This one will work with XLPower Specter 700, or any model helicopter with 15mm main shaft and similar swashplate diameter.
Fits for tabs of length 37mm, width 27mm and arbitrary height.
Ahoy!!! Me Hearties!!! Notes: all the parts are within a .1 to .2 tol. Minor sanding may be required. I ended up supper gluing everything to make sure it wouldn't fall apart. I made the skull by printing the first 4 or 5 layers in white…
I recommend printing from bright plastic!
Both work well. Antenna guides can be resized to the desired length by adjusting the z-hight in the slicer program, also need to be glued to the base. I used a strip of the supplied double sided tape to attach to the boom. A magnet is…
Wanted a simple indicator for our dishwasher as we kept forgetting if the dishes were dirty or not. It rotates easily to change from Dirty to Clean. You will need a flat, round magnet. The hole for it is 15.8mm in diameter and is 2.5mm…
Use this swachplate leveler for SAB 700 Il Goblin Pro.
It replaces the upper part of the Swash plate, which is usually one of the first casualty during a firm contact with some sort of obstacle. Printing: The support material is allready fitted to the modell. just print it solid with…
Use this tool to level your swashplate. When the linkage and servo mid points are set correctly, all 3 nubs will be touching the swashplate at the same time. See photo for printing orientation. I used PETG.
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
Use this swashplate gauge holder, to easily check your blade grip angles without blades attached.
New version of my first trial swashplate repair with an higher thread and a thicker round nut. Works perfectly on my rc helicopter (xk k110) Print Settings Printer Brand: ELEGOO Printer: ELEGOO SATURN Supports: Yes Resolution: 0.05…
This is a swashplate leveling tool for the OXY 5 series of RC helicopters. Printing it at .12 res
Swashplate universal fixation: 1x M2 10 / 1x bolt M2 1x magnet 4/1mm Category: Hobby
Materiál - PLA, PolyAir infill 100%
This is a replacement clip for the power cable and bidet hose on a Brondell Swash S1400 . It may also work on the S1200 model, but I haven't tested that. You can see in the second photo the original clip in white (it's broken), and the…
For any Swashplate bush from 8mm to 6mm
Swashplate pour Soxos 550, à placer sous le plateau cyclique pour un réglage rapide du 0 Swashplate for Soxos 550, to be placed under the swashplate for quick adjustment of the 0 Category: Hobby
Set-up tool for model RC helicopters
wait until the bed fully cools down after finishing the print Scale +/- if printer not calibrated
Just another boring diswasher sign, with one great advantage. It is horizontal so you can check it from above, you don't have to bow/kneel before the machine :) If DIRTY then you can pack in your plates and utensils. As soon as you start…
Print the swashplate with supports on build plate only and block out supports in the peg hole. Print the adapter as is, it has support already built in. The adapter is an extension and peg size increase from…
I didn't like any of the options to wall mount the remote control for my Brondell Swash 1400 bidet seat's remote control. I considered designing a shelf, but decided my best option would be just to hang it. To facilitate hanging it, I…
Print in pla, no supports. Place the part in the plastic housing of the pcb. Then, put in place the original dishwasher button (the part that can be seen from the outside).
Mounts for a Goosky RS5 and Align 550/600/600N to use a dial indicator to level your swashplate.
EN Inspired by the design of malte i needed to create a little different one for my model. the original wheels already completely dissolved over time. I printed it in PETG, lets see how long it lasts DE Inspiriert von Maltes Design habe…
Solid CAD collection for a swashplate axial-piston hydraulic pump with SAE interface and pressure ports. Includes the full assembly, cutaway, rotating group, and piston-shoe kinematic unit. STEP files are provided for CAD review and…
Material: PLA, Standardfüllung 15%, Rand an den Füßen, nach Druckfertigstellung Zentrierbohrung in der Mitte auf 4mm aufbohren
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
Hoist the Jolly Hog and set sail with Captain Snoutbeard, the fiercest pork-pirate to ever prowl the seven seas! Clad in a tattered tri-corn hat emblazoned with a menacing skull-and-crossbones, this daring swine commands attention with…
This fully 3D printable swash plate engine is based on the INNengine e-REX. It is not to scale to the e-REX, but shows how it functions. The model rotates to show the piston movement and has a removable section to view inside the engine.…
