Replacement cable clip for Brondell Swash S1400
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.14 – €0.17 net (excluding VAT)
For file: Brondell Bidet Cable Clips r1_0.2mm_PLA_215C_12m_2g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a replacement clip for the power cable and bidet hose on a Brondell Swash S1400
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement clip for the power cable and bidet hose on a Brondell Swash S1400. It may also work on the S1200 model, but I haven't tested that.
You can see in the second photo the original clip in white (it's broken), and the new one in grey.
Printing instructions
- Print the .stl file as-oriented.
Installation instructions
- Note that one side is larger than the other (bidet hose on the larger side, power hose on the smaller side).
- Gently fit the clip over the power and hose cables; it will rest snugly in place.