1,335 models
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Bowser Spikey Shell. Updated: 1/1/2024: Also removed piggy bank version. May or may not put up a new piggy bank version.
Print approx. €9.29–€11.35 excl. taxPreliminary estimate for one variant
Do you need a spiffy name tag? Here you find over 1200 names , ready as 3D sweeping name tag sculpture. This is a different design than the previous ones, a. o. it has a square base. Customizing: You can also customize the model to show…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Wenn mal wieder der kleine Hunger kommt ist dieser kleine Automat perfekt! Einfach befüllen, daran ziehen und genießen. Geht mit den meisten süßen Erdnüssen ob orginale oder die günstigeren. Salzige naschereien sollten in etwa die gleiche…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Swedish Chef from the Muppets
Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant
After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
A cute frolicking unicorn pony. Based on the drawing by bobdude0: https://bobdude0.tumblr.com/post/131039529549/i-dont-know-i The model is balanced on the front leg.
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for one variant
I wanted to share my first model with you. Created from a paper sketch and modeled in Fusion 360 and sliced in Prusa slicer for a Mini+. This is a 3-wall cutter with a beveled edge to make it more comfortable for holding. The 16mm cutter…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
This is a simple one-handed operation TicTac dispenser, for use when driving or wherever. The discharge chute can be flipped to make it left or right handed. Note: Now V2 . The dispenser is no bigger externally, but the slider cavity has…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Sweet Papricka as imagined by venomantis - Sketchfab Fixed for 3d printing.
Print approx. €12.79–€15.64 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Do not put in the dishwasher, the PLA would not withstand it. Introducing the Table Crumb Sweeper - Kitchen Assistant , your ultimate helper for keeping tables, countertops, and other flat surfaces tidy! This tool combines a sleek dustpan…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Coat of arms - Sweden Znak - Švédsko
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
She's not as courageous. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
A simple Home Sweet Home sign that can be customized with your family name. You can use: The Fusion 360 3FD model and emboss your name. Modify the “The Miner's" text by editing the sketch. Explode the text and finish the sketch Emboss the…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Need some motivation to get your tongue in check? The swear jar has got you covered. Fits a standard mason jar. Printed in tricolor silk PLA.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
A simple swear jar to fill up while trying to contain your cursing. Prints in 2 pieces with a simple layer color change for the text. It is big enough to hold a good amount of change, but small enough to fit on a Prusa Mini. Printing &…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
What's your favorite flavor? Use filament swaps to create the candy corn of your dreams. Size up or down but watch the size of the post hole. We included the gcode of the set, as well as the stl, so you don't have to program your own…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Parts: 1x M12x330mm Gewindestange (Zweierpack für 2,99€) 2x M12 Muttern (Viererpack 1,49€) 2x Korrosseriescheibe 13x37mm (2 = 0,47€) 2x Karrosseriescheibe 17x50mm (2 = 1,49€) Gesamt: 6,76€ The diy-steuersatz-werkzeug (Headset Bearing Cup…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Rongorongo : Harekāingakai : My place of peaceful rest and nourishment : : Home Sweet Home Easter Island Version of Home Sweet Home Sign. The gcode includes fillament swaps at z height... So if you dont want that please reslice.
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
Als Valentinsherz, Liebesherz oder einfach nur so für seinen Schatz.Ich habe es mit PLA und einer Geschwindigkeit von 50 % gedruckt um die Schrift einigermassen Vernünftig aussehen zu lassen.Farbwechsel ab Schrift Anfang ist bereits in…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Sweden hockey team coaster
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Gift box primarily designed as packaging for tree-shaped gingerbread cookies, made using my cookie cutter https://www.printables.com/model/1091674-cookie-cutter-tree . The box can also hold cookies of other shapes — the divider can be…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
Wappen des Planungsamts der Bundeswehr mit 3 Magnettaschen für runde Magnete 5 x 3 mm auf der Rückseite. Es muss eine Druckpause eingelegt werden, um die Magnete beim Druck platzieren zu können.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Versions with vertical or horizontal holes provided. Color change at 2,10mm height. Filament used: Prusament PLA Jet Black 1kg | Original Prusa 3D printers directly from Josef Prusa Prusament PLA Vanilla White 1kg | Original Prusa 3D…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
( Please suggest in comment a better title, summary and description , had hard time to explain it. I will update this product infos with your suggestions.) On the picture I finger point the 3D Model. details: Suitable for various…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Material: PETG Schichthöhe 0.1mm Druckorientierung und Support siehe .gcode-Datei.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…
Fits a Zyn can, but I don't know what other tins it might fit, let me know if you want another size Zonnic Tin/can sizes added (5.2mm wider) - 12/18/23
Thank you for downloads, likes… Enjoy !
Bring warmth and personality to your desk with this Sweater Man Pen Holder, a cute and minimalist 3D printable desk organizer designed to blend functionality with modern decor. Inspired by cozy winter sweaters and clean Scandinavian-style…
Sweet Little Lamb Read.me! Fast and lightweight print. Very little supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.3 Fuzzy Skin thickness: 0.2 If you're interested in the…
This is a bird house designed to look like a traditional Swedish cottage with a small front porch. You can decide if you want to print the house shell as one piece: gehaeuse_v2 or you can print the house shell in 3 parts: Floor: boden_v2…
Changelog: 5.7.2021 Added a “short” 160mm version for easier printing on the Prusa Mini.
An omnidirectional wheel with stationary motors, that can drive in any direction. In addition the the printed parts, the following is used: 1 wheel of with an outer diameter of max. 75 mm. I used this one:…
Remix of the Zyn Tactical Snus Holder from @JacksonSediv_1247627 Fits a Velo can, but I don't know what other tins it might fit. Tactical Swedish Snus Holster for Velo's. Can be attatched on a Tool Belt or Pants. Does require supports,…
⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…
A PLA/PETG printable bottom case for the Ferris Sweep v2 . The case is designed to accommodate one layer of 2mm thick foam that sits between the PCB and the bottom case. The foam slightly deepens/mutes the sound of the choc switches…
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
1 are covers, 2 low boxes 4 high boxes, 3 low inserts 5 high inserts. Size cca 145x145x39 (54)mm. Inside hight 30 and 45.5mm.
Meet Nova, a tiny unicorn packed with cuteness! Designed as a quick 20-minute print, this monocolor version is light, smooth, and super easy to make. Perfect as a pocket companion, Nova adds a touch of magic wherever you go. No supports…
Ausweishalter für Werksausweis, YubiKey und Schlüssel #badgeholder #yubikeyholder #keyholder Drucker: DeltiQ2plus TRILAB Düse: 0,4 mm Layerstärke: 0,2 mm Filament: smartmaterials3D YouTube Video: Making of Version 11: Erhöhung der…
A mystical loom weaves resplendent spiraling pleats from the very fabric of light. Open source version of https://cosmicjubilee.com/designs/pellucid-sweep/ - available to buy now! A tealight holder whose base gradually develops into a…
This model is compatible with the lego system.
🇸🇪 Welcome to Sweden! 🐴 This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
This little sleepy pup is the definition of peace and coziness! With its curled-up pose and soft, rounded shapes, it makes the perfect pocket-sized nap buddy—whether you use it as a keychain or let it snooze on your shelf.
Upgrade your snowpeople for Winter! Download the snowman base here https://youtu.be/S00Uxp5Etow Can I sell copies of this? Yes! This project was shared under the Creative Commons - Attribution license. This license allows selling copies,…
This model is compatible with the lego system.
I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 🧁 Cupcake Clicker – The Sweetest Fidget Treat! 🧁 Love cupcakes? Love clickers? Now you can have both! The Cupcake Clicker is a…
material PLA a 21 millimeter long piece of filament is used as a pin, which you insert into the hole in the lid and the bin
Say hello to Pango, the adorable pangolin who’s ready to roll into your heart (and your print bed)! With a curled pose and detailed scales, Pango brings texture, charm, and wildlife flair — all in under 30 minutes! ✔ One monocolor 3MF…
better version has claws attached to the bottom and the normal one does not. non-better version is a headache to print. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.16 Infill: 0% (your…
We created a differential swerve drive for our 2022-23 Power Play robot. This is the pod design we created for our robot. The differential swerve pod was designed to be mounted to a drivetrain using 40mm needle bearings and a 1/4" Hex Cap…
Do you need a spiffy name tag? Here you find over 1200 names , ready as 3D sweeping crazy name tag sculpture. This is a different design than the previous ones, a. o. it has a square base. In total there are 11 GB of STL here, so please…
An omnidirectional robot build on the basis of three of my differential swerve drive modules . The modules are modified a bit, so that the motors are horizontal and not vertical. This way I could make the robot base quite thin. You can…
Garbage bins in 1:87 H0 scale. Designed after typical Swedish garbage bins in the 60th to 80th. Visit my blog at: Enely's 3D Print instructions Try both with and without support. The prints in the picture are printed without support. (Not…
This is my take on an infinity style photo backdrop stand. It has built in clips to hold the paper. I added springs to enhance the grip on the paper. No support needed. This is not a "remix" technically as I designed mine from scratch but…
Update v2: Fixed some errors and not working parameters Download openscad and the script. Open the script in openscad Customize the parameters Text, Font and Size of the tag Height (Baseline) of the tag Angle Degree of the sweep (90deg in…
A bowl for snacks and sweets with an included trash can. Available in a large and small version.
A collection of covers and protectors for REV Robotics MAXSwerve that 2811 has been using on our modules. The Gear Dust Cover has grease holes so you don't have to disassemble the module to regrease. If you use Fusion 360 you can open the…
I printed him with tree supports and small brim and then painted using air-brush, but you can also try to use painting and AMS. Hope it will bring you so much joy on this Christmas! If you would like to support me - you can buy me a…
This holder is designed to hold a sweet potato vertically on the fish tank with glass thickness of 5mm. Normal nano to medium size tank should be fine. Sweet potato grows super fast when partially submerged to the tank water. its roots…
IF YOU SPRINKLE WHEN YOU TINKLE BE A SWEETIE AND WIPE THE SEATIE made by MATT GERMAN 100MM X 75.4MM X 3.5MM 0.3 MM LAYER HIGHT 0.8 WALLS
3003 Fantasy Bits Mega STL Collection on Kickstarter Description 🎉 LIMITED-TIME OFFER: GET 30% OFF MY 👉👉👉 patreon.com/SPAJX 🎉 Join my Patreon and dive into the world of exclusive 3D models! ✨ 👉 20+ FREE MODELS 🆓 👉 COMMERCIAL LICENSE 💼 –…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use dispenser with standard square tissue box. Printed one in white PLA and the other in wood PLA with a 0.4 nozzle at a 0.20 layer. Updated .stl file to fix floating objects. Should no longer receive warning when slicing. No supports…
3d printable macaron model, just mix the colors of the parts as you wish and have fun! We give all our work for free to the community, so if you like our works please consider donating a coffee to keep the project alive. Thank you…
Simple Tenting Mount for Ferris Sweep v2 Case Model provided is for the left hand side, mirror it in your slicer to get the right hand side. Print with 0% infill. Takes about an hour per side using a 0.6mm nozzle. I have provided a few…
Meet this adorable and charming winter goose figurine dressed in a textured holiday sweater and a bright red scarf. With its playful winter hat, expressive eyes, and festive details, this character brings gentle humor and seasonal warmth…
Super Sweet Cupcake Planter for Succulents and other houseplants The big idea During the pandemic i got into succulents as easy care, easy to propagate houseplants and as I propagated and acquired more I needed to ways to hold them, help…
I wanted a light box for taking pictures of 3D prints, but they take up so much room. The Photo Sweep is a quick and easy way to provide a background. Simply use a piece of paper and clip the two stand in place. v2 - Updated version here……
This model is compatible with the lego system.
This model is compatible with the lego system.
Funny sign -"Beer is not the answer, Beer is the question. and the answer is yes!", dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
Arctic Seal Diorama – 3D Printable Model Set Seals are optimized for support-free printing. The flippers are angled to stay within manageable overhang thresholds, and the underside contact area is broad enough to ensure stable bed…
Iron Cross - The Bundeswehr Logo
Material: PLA Nozzle temp 215 Bed temp 60 Printing speed 100mm/s Support No Plate adhesion No 15% filling
Warning, FDM prints are susceptible to bacteria growth. Use at own risk! More information about food safety . This was printed at 60mm/s with 10% infill. All the parts together take around 5 hours of printing on the Cr-10s. Support is…
A simple GoPro mount I made to better (more securely) fit the profile of my M/L Sweet Protection Strutter. Most likely usable for other helmets (duh) but make sure you have tethers and such, as I'm not responsible for your camera. I…
A printable sleeve case for the Ferris Sweep Bling MX . It's a bottom case that covers the bottom part of the PCB. Its intended to be used with any standard Sweep Bling MX Switch Plate. Important : this sleeve case was designed with N!N…
Linzer sweet cookie cutter set set vykrajovátek na linecké cukroví
🎄 Chimney Advent Calendar: a sweet drops down the chimney every day! 🎅 Hi everyone! 👋 I wanted an advent calendar that's actually fun to open, not just another paper door. So I made a tall brick chimney where Santa's treats really do come…
Behind the somewhat unwieldy name lies a small tool that can be a help for those who get beads of sweat on their forehead when thinking about changing a component that involves dismantling a textile sleeve on the MK series. It is very…
I'am not a friend of 3D prints which requiers supports. My HP Reverb G2 Face Cover is printable without ugly supports ;-) The model is desinged from scratch (not modified) to get a better FOV and of course easy printing. The shape is a…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 =…
Here is the CAD of the drivetrain that we used during the FIRST Tech Challenge 2022-23 Power Play season. It is a four pod differential swerve drive that utilizes swerve pods that we designed and released here:…
Used to lock the registration plate in place, can be customized with the text of your choice. The list itself is 450mm so I cut it in two parts with a dovetail connector in the middle so it can be printed diagonally across most build…
Sweet Easter Bunny Family – Knitted Series Celebrate Easter with this adorable knitted-style bunny family! This charming set includes 5 cute models : Daddy Bunny, Mommy Bunny, Little Boy, Little Girl, and a tiny Baby Bunny. Each character…
Its a sculpture showing a side-by-side text message, with a symbol in the middle. You can customize the model to show your most favourite couple. Please install OpenSCAD on your own computer and follow these instructions . Thanks Thanks…
This model is compatible with the lego system.
This has been a monster project, one I have dreamed of for almost 8 years. Swerve like in FRC, but miniature! Check out the OnShape CAD here . This project is not for the feint of heart, extra hardware is required: 2x XRP boards 8x XRP…
Both pots are designed to set 4 inch diameter by 3 inch tall thin plastic pots into. My prints: 100% scale 0.4mm nozzle and line width with 2 line wall count 0.2mm resolution 10% cubic infill No supports Filament: Overture Matte Gray PLA
Inspired by the various toroidal versions floating around, I wanted to make one myself, and swept the blades back 30 degrees... It came out pretty well, and cuts water nicely. sized for a "4 mm flexible drive shaft" that has M4 thread on…
Adapted from the game files, this is the Sweepa Pal from Palworld in High Resolution, and separated into multiple parts for easier multicolor printing! Feel free to use the same color for all parts if you prefer to paint afterwards.…
Just a simple & minimalistic Case for the Ferris Sweep Bling Low Profile Custom Split Keyboard The Standoffs have a diameter of 4.5mm and 2mm Holes with a M2 Thread
