Counting matching models…
This is a custom adapter plate for the SwitchBot WiFi Smart Lock Ultra, designed specifically for a Euro cylinder lock. The central hole fits the cylinder, while the side holes and upper posts align with the SwitchBot Lock Ultra to keep…
You can use as alternative of original model, if you want use also keyboard and see LED indicators.
Dimensions are a little wonky, but so far, so good; it fits well, and even without the screws, the plate was able to hold the lock. I added a bunch of 3M tape to the underside and stuck it well to the door. I included a couple of…
With this cover you can lock your keypad on the wall at 45/35 degree adapter and you have an hole for touch ID and nother hole for led response.
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
This is a custom adapter for some kind of ABUS Securelocks for the Switchbotlock
Add-on lever for the Switchbot Lock Pro knob. Tight fit of extender print requires a bit of force to install. Short and Long versions. Print as pictured. No supports needed.
Case for SwitchBot Smart Lock Pro battery. Just use a small Lithium-ion battery with 1S BMS and you will have a working battery. I used salvaged vape battery + TP4056 for one and salvaged handy fan battery (already had BMS attached) for…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
Add-on lever for the Switchbot Lock Pro knob. Tight fit of extender print requires a bit of force to install. Short and Long versions. Print as pictured. No supports needed.
Safely wall mount SwitchBot Hub Mini and Hub Mini Matter Enabled hubs using command strips. Includes version with two holes 40mm apart. Print as pictured. No supports needed. 5 perimeters gets a nice slot peg top.
A minimal stand to hold the SwitchBot "Hub Mini" and "Hub Mini Matter Enabled" in a vertical position on a desk or shelf. Two versions, one with two screw holes 80mm apart. No supports needed. Print as pictured.
Something to protect the Switchbot Lock Pro Magnet that's used to determine the door position. Overall cover size of 40mm x 80mm gives lots of contact area for two sided tape (3M 414 Scotch) to make sure it stays put. Includes internal…
This is an adapter, identical to the originals, that allows you to adapt the Securemme key to the Pro and Ultra locks without having to file the key shell, ensuring an excellent fit. This adapter is suitable for all Securemme K-series…
Simple, sturdy SKÅDIS-compatible holder designed to mount a SwitchBot Presence Sensor directly to an IKEA SKÅDIS pegboard. The holder keeps the sensor securely positioned while maintaining clear coverage for reliable presence detection.…
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
ich habe bei mir den SwitchBot Lock Pro verbaut und musste feststellen, das das schloss zu weit raus schaut und um die Lücke zwischen SwitchBot und Tür zu schlissen habe ich diese Ausgleich platte geschaffen.
This is a cover for the original SwitchBot Lock (non-Pro/non-Ultra) for both the lock body and the knob. As every installation of the SwitchBot lock is a bit different, depending on the underlying lock you are using it with, it's not…
This camera stay/mount is specifically designed to position a SwitchBot Camera onto a Petio pet playpen (pet circle) . It allows you to keep an eye on your pets from the perfect angle. Key Design Features: Magnetic Mounting: Since the…
This is a custom-designed adapter to mount a SwitchBot BOT onto a YKK AP shutter remote control . It ensures the SwitchBot's pusher is perfectly aligned with the "Open" button for reliable operation. Key Features: Screwless Design: No…
I needed a simple holder to utilize existing holes locations for my new smart lock. Print flat - no supports needed. I advise "with screws" version. Without it only glue is holding the device. Given it is spring loaded - it can detach.
There isn't a flat spot large enough to mount the Switchbot Bot, so this fills the radius and allows secure mounting. Glue or double sided tape the mount to the fan.
Printed in PLA+ 0.2 Layerhight 15% infill Original cable will fit perfectly, it need some force to insert but it needs to sit tight that it won't get pushed out when plug in the battery
Adapter Plate for Switchbot Lock Pro The lock wont fit because the locking cylinder was to long. This adapter closes the gap between and it will have a good fitment to the door
Printend with the gap facing down, used tiny tree supports only on the rounded tips.
This model is to be a slide in on the plate shown on the photo in order to provide good grip for the lock without a need to use glue
a simple holder for mounting the SwitchBot Indoor/Outdoor Thermo-Hygrometer on a wall or similar. there are 4 versions The standard version printes with the right resistance on a x1c. Version 2 is with 2 holes for mounting Version 3 is…
Printed at 0.2mm layer height. Nozzle 0.4mm. No supports needed. But brim helpful since it is thin. Bracket in photos was printed in white PLA. The source is here at Onshape if you would like to make a remix with source.
Neue Version für die einfache Entnahme eines SwitchBot Matter Realais zur Halterung auf eine DIN Hutschiene Version 2.0 (mit Herausnahmewerkzeug) SiwtchBot DIN-Halterung für: SwitchBot Relaiy Switch 1 SwitchBot Relaiy Switch 1PM In dieser…
The wand adapters that came with the switchbot blind tilt is too large to fit the wand on my blinds and the mounting position of the device itself didn't work so i had to design my own version. Wand adapter This adapter replaces the…
This is a 3D model of the original mounting bracket for the SwitchBot Pan/Tilt Camera, identical to the one included in the box. The design replicates the stock bracket without modifications, providing a replacement part for those who may…
SwitchBot Lock Pro lacks an adapter for the common danish Ruko lock pin in a cylindrical lock with a knob. I created this one with the original measurements of the included adapters, but with the slot for all of us in Denmark that are…
My switchbot keypad touch is attached outdoor to the garage door, unfortunately the fingerprint sensor doesn't work if it gets wet, for example due to rain. This cover protects the sensor from rain and other weather influences. A bolt is…
Print upright, no support. As the original, Fusion project file is available for you to play with.
As there are no affordable mounting plates or smart locks available for multipoint doors, I designed a mounting bracket for the Switch Bot Lock Pro. Since we are renting, this can be easily removed without causing any damage. You need to…
SwitchBot Lock thumb turn adapter shorter than the one offered in the kit Print Settings Printer brand: Prusa Printer: I3 MK3S+ Rafts: Doesn't Matter Supports: Yes Infill: 20% 0,2mm
The A.O Smith Hybrid water heater is supposed to report the input ant output temperatures to the heat pump. I did not find it, but do look into this before printing this. The print will hold a SwitchBot outdoor thermometer close to the…
The Switchbot Outdoor thermometer comes with a lace and some double-sided tape. I did not trust the double-sided tape to hold for more than six months outside. So I quickly designed this holder. The head of the screw can be 7.4mm or…
Prefer a rather flexible material like PETG. Simply slide from the side of the column.
Adapter is for attaching the SwitchBot Lock past non-removable door panels.
This version fits under an Abus door fitting and is virtually invisible.
I wanted to make my sliding door lock smart, but there really aren't any options out there. There are a few low-profile smart locks by Yale and others, but these are almost/completely all for specialized doors anyways. The issue is the…
For those who has Switchbot Lock Pro and want to install it on Wilka 1405 lock cylinder with round knob, original knob you can remove simply by pushing out metal rod from center, next just put adapter and lock it with original rod.
Switchbot Lock Pro mount plate make with 10,5mm depth from doors create for upper door plate with 95mm screw spacing. Mounted with original door plate screws.
I've made custom mounting plate for Switchbot Keypad Touch You can mount it to wall with tape or with screws. Locking mechanism work, you have to put sim card removal on bottom of keypad to remove it from the mount, but you have to remove…
For the mini-pc, it is so difficult to keep the switchbot attached. I made this to keep it on. This will allow you to turn on/off using switchbot. Short Version need some additional support. Long version can stay on.
This is a mounting for the Water Leak Sensor from Switch Bot, it works with and without the sensor cable. To mount the Mount, you just simply use the pregiven tape from Switch Bot to the back of the mount and glue it to your surface!
I really like the SwitchBot outdoor temperature and humidity sensor as it is, but I don’t have any shaded area to place mine. As a result, direct sunlight affects the readings and makes it unreliable. To solve this, I designed a simple…
A power adapter for the SwitchBot Bot that allows it to be powered from a wall outlet. Requirements Lug terminal Two M3x6 bolt and nut sets 2.1mm panel-mount DC jack Wiring / Wires 3.3V AC Adapter SwitchBot Botの電源をコンセントから供給するためのアダプタ…
The SwitchBot Lock Ultra requires two very tiny fastener seals if the lock is to be installed upside down: https://www.youtube.com/watch?t=186&v=cjRXdJyL9Uw (03:07 in video) Without them installed, gravity/vibrations can pull the fastener…
You will need an M3x16 screw minimum, and Skadis T-Nut M3 . Very simple install just add the Switchbot Wall mount adapter included in the box (needs to be unscrewed from the stand) and line it up with this mount, then you can use an M3x16…
The stock mounts in the package are designed for the case when top blinds bar is NOT COVERED. The only way to install them using stock ones was to stick to the cover which is not well fixed. Such solution turned out to be a temporal…
simple slot everything together and secure with the the M3x60 bolts. Parts to print: Top x1 Intermediate screen x2 base x1 mounting bracket x1 Print Settings: Filament - PETG (or other UV resistant filament) Layer height - 0.3 Support -…
Safely wall mount SwitchBot Hub Mini and Hub Mini Matter Enabled hubs using command strips. Includes version with two holes 40mm apart. Print as pictured. No supports needed. 5 perimeters gets a nice slot peg top.
Switchbot didn't want to give me a mounting plate because I bought it used, which effectively made the lock useless, so I decided to print one instead! Printed with PC-CF. However, even though I printed with PC-CF, the sides that get…
A minimal stand to hold the SwitchBot "Hub Mini" and "Hub Mini Matter Enabled" in a vertical position on a desk or shelf. Two versions, one with two screw holes 80mm apart. No supports needed. Print as pictured.
Puprpose : Get rid of nasty hanging wires visible on both sides of a window. Assembly: Cable Organizer slides on from the top and clicks on the Solar Panel. No glue. The cap hols tight and is also fixed by a wire tube/cylinder. Assembly…
I used 2 colors to match the leg to a trim color and the cable orginizer to the solar panel. The best print orientation for easy assembly is in a picture. FreeCAD file is also available if you want to modify anything.
These make sure the small rollers stay properly aligned inside the rail in order to prevent them jamming. Clip one of them to each metal arm of the SwitchBot, taking care to orient them correctly so they clear the rollers.
A DIN rail mount for a Switchbot Relay. You will need to print a tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab It can be found at:…
Something to protect the Switchbot Lock Pro Magnet that's used to determine the door position. Overall cover size of 40mm x 80mm gives lots of contact area for two sided tape (3M 414 Scotch) to make sure it stays put. Includes internal…
I published 4 sizes 3mm (I used this but should have used a thicker one) 4mm 5mm 6mm Of course you can take any of these models and resize them in your slicer.
Switchbot Lock Pro magnetic battery cover replacement. Blends in almost perfectly. Requires two 3mm thick 3mm diameter neodymium magnets to keep attached (similar to original one). Check magnet orientation before pushing in. I printed it…
i had the problem that the switchbot pro didn't hold tight enough on my door. Because my lock is not flat on my door. The lock is about 10mm high and it is only a small round area. So the original plate didn't hold tight enough because of…
The Switchbot Lock Pro Adaptor is designed to seamlessly integrate with a single deadbolt mechanism, allowing users to enhance their current locking system. The Switchbot Lock Pro does not provide single deadbolt adaptor in certain…
The chamberlain WiFi garage door opener phone app has not so great reviews (it show advertisements). The SwitchBot button clicker works as an alternative that is more reliable. Also one less app on the phone and wifi device Printing with…
I designed a bracket / clip for the SwitchBot IP65 Indoor Outdoor Wireless Hygrometer Thermometer
Switchbot Lock door knob mount plate for closets
The curtain bot from Switchbot was unable to overcome the friction between Grommet on curtain and the rod, while opening the curtain. This adapter reduces the friction by slightly modifying the angle and reducing the friction. Attaching…
The trashbox flap of my SwitchBot S10 floor cleaning robot broke. I created a replacement which works just like original. Print time is only 4 minutes.
Stabilizes the SwitchBot Blind Tilt to keep it from ripping off the mount. Sticking the SwitchBot to the blinds isn't even needed with this if you want to skip it.
You can edit the OpenSCAD-File to make it fit whatever you need :)
I have bought a new SwitchBot Lock Ultra, but due to my door design I wasn’t able to place the magnet correctly. So I designed this quick riser to get it to the right height. Maybe it will help someone else :D It’s very specific, but who…
Outdoor thermometer SwitchBot Indoor/Outdoor Thermo-Hygrometer sensor, stevenson screen
As k11+ dust bag can last from 60 to 90 days, and I don't like how they engineered the dust bag so you always need to purchase new bags, this one helps to clean the dust bag internally extending the duration of a single bag indefinitely…
IMPORTANT: Print with 0.25 for best results, might work on 0.4 but it's very thin This is a small adapter that can go over the keyless side of a nemef NF4 (and possibly other nemefs?). I created this last year, had to print it again after…
This is a mounting solution that allows SwitchBot to reliably press the buttons on CHOFU EcoCute (heat pump water heater) remote controllers (CMR-2534P/CMR-2544P). The Problem When attaching a SwitchBot directly to this remote controller,…
SwitchBot Indoor/Outdoor Thermo-Hygrometer holder.
This is a wall-mounted L-shaped bracket specifically designed for the SwitchBot Pan/Tilt Cam Plus 3K. The mount allows the camera to be installed upside down on a wall, making it ideal for ceiling-adjacent mounting, high wall placement,…
I decided to finally add a hygrometer to my filament boxes, but most cheap models out there use LR44 batteries, which I avoid as much as possible. Models using AAA batteries are almost the same price as the full featured Switchbot Meter…
This is an adapter, identical to the originals, that allows you to adapt the Securemme key to the Pro and Ultra locks without having to file the key shell, ensuring an excellent fit. This adapter is suitable for all Securemme K-series…
Simple, sturdy SKÅDIS-compatible holder designed to mount a SwitchBot Presence Sensor directly to an IKEA SKÅDIS pegboard. The holder keeps the sensor securely positioned while maintaining clear coverage for reliable presence detection.…
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
ich habe bei mir den SwitchBot Lock Pro verbaut und musste feststellen, das das schloss zu weit raus schaut und um die Lücke zwischen SwitchBot und Tür zu schlissen habe ich diese Ausgleich platte geschaffen.
This is a cover for the original SwitchBot Lock (non-Pro/non-Ultra) for both the lock body and the knob. As every installation of the SwitchBot lock is a bit different, depending on the underlying lock you are using it with, it's not…
This camera stay/mount is specifically designed to position a SwitchBot Camera onto a Petio pet playpen (pet circle) . It allows you to keep an eye on your pets from the perfect angle. Key Design Features: Magnetic Mounting: Since the…
This is a custom-designed adapter to mount a SwitchBot BOT onto a YKK AP shutter remote control . It ensures the SwitchBot's pusher is perfectly aligned with the "Open" button for reliable operation. Key Features: Screwless Design: No…
SwitchBot Hub Mini and Hub Mini Matter Enabled Skadis Mount. Print with supports. Not really necessary, but for a small print with supports like this I switch my print speed to Silent Mode , just to make sure there's no failures. Enjoy.
I needed a simple holder to utilize existing holes locations for my new smart lock. Print flat - no supports needed. I advise "with screws" version. Without it only glue is holding the device. Given it is spring loaded - it can detach.
Remix from the original SNR Tech Bytes Valance clip for Switchbot Tilt. Extruded +7mm and filets on upper blind area. Printer: Any Material: PETG, PLA+, ABS Brim: 5mm to 10mm if needed Color: White or any
SwitchLock Monchi – SwitchBot Lock Halterung & Innengarnitur Für Hörmann Nebeneingangstüren mit Schutzbeschlag. Hintergrund Mein Kumpel (Spitzname: Monchi ) wollte sein SwitchBot Lock Pro auf die Nebeneingangstür bringen. Die Tür ist eine…
Some cyliders locks are too girthy, this is designed for the unlucky ones.
SwitchBot Indoor/Outdoor Thermo-Hygrometer Holder Same as the original, nice and simple, just without the screw-mount
I found a model on Makerworld by VaderAG to be able to re-use dustbags for a Switchbot K10+ Robot vacuum. I printed this model hoping it would fit on my K11+ but sadly it didn't. So inspired by the model I found, U designed one to fit a…
English Description I had a very specific problem. I replaced the ceiling lights in my Japanese house with SwitchBot ceiling lights ( https://www.switchbot.jp/products/switchbot-ceiling-light ). However, as all smart light users know, I…
Ce projet est un SwitchBot Bot , un petit boitier qui contient un bras robotisé capable d’appuyer physiquement sur un bouton. Il permet de rendre compatibles avec la domotique Matter des appareils qui ne le sont pas à l’origine. L’idée :…
Extended Valence Clip for Home Depot 2" Blinds set. In my case, the extra clearance allows for the use of a switchbot tilt. I printed mine in PETG and achieved similar strength and springiness to the original OEM part. The design works…
