Cable Oganizer for SwitchBot Blind Tilt Solar Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable Organizer to hide excess of USB cable to SwitchBot Blind Tilt Solar Panel
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Puprpose: Get rid of nasty hanging wires visible on both sides of a window.
Assembly: Cable Organizer slides on from the top and clicks on the Solar Panel. No glue. The cap hols tight and is also fixed by a wire tube/cylinder. Assembly steps are in the last photos, adjust the length accordingly.
BTW: You can still attach the solar panel to the window with the orginizer using double tape or even slide it on the already attached one if you have room on top of the panel (not my case).
Print: You can print in any orientation but I used the below orientations
cap: to have visible surface ironed.
body: to have the holding rim sitting on the plate and be printed preciselly and the surface connecting to the cap be ironed too in order to have no gap.
Files: FreeCAD file is also available if you want to modify anything.