Counting matching models…
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
Unfortunately the exhaust on the t480s is on the right side, while having warm air blown onto your mouse hand may be fun in winter it definitely isn't in summer so I decided to mitigate that. From my testing it did not decrease cooling…
This is a smart card reader cover for thinkpads. It is designed for T480 but it should work on others too. To make it look perfect, sand with ~600 sandpaper. Height of thinner part: 1.25mm Height of thicker part : 1.5mm Print Settings…
I connect two usb-c docks to my thinkpad whenever I'm at my desk. It can be a little fiddly, so I made this holder that makes it really easy to connect both devices in one motion. Printed in PLA with a 0.6 nozzle.
Made this for my Lenovo T480 work laptop to allow it to stand vertically to save desk space. The gap is 21.1 mm wide. You will need two of these to safely keep it stable and I would use some rubber feet for the bottom.
I have designed a camera cover for the Lenovo T480 laptop. The cover is 80mm tall, to fit over the Face recognition and Camera module. Print it like on the pictures, then you need no support. Settings (PrusaSlicer) Standardsettings:…
Simple vertical stand for a ThinkPad T480, print 2 for proper stability. Category: Other
Not my best work, lol. I broke 4 hinges while prototyping this. Set the layer height to as low of a value as you can, I printed with 0.08 layer height. If you notice that the keycap didn't print quite right, do not try to put it in, you…
Thinkpad T480s bottom case Still alot of work to be done. Free free to modify to your needs. Print out of ABS or PETG at least...PLA WILL warp after a few days use.
This is a vertical laptop stand. It's also called as necksaver:) It's designed for Thinkpad T480 but you can use for any laptop which has proper dimensions. The second version is designed to prevent falling etc. But the movement…
IMPORTANT YOU NEED THE WASHER TO PREVENT DAMAGE TO YOUR LAPTOP! I made this so I could put a B+M key M.2 NVMe SSD in the WAN slot on my Lenovo Thinkpad T14 Gen1 Ryzen laptop. If compatible the slot is wired for PCIe x2. If the WAN slot is…
I wanted a nice looking mount for my AirSpy R2 for my laptop, as I occasionally use SDR in my car and having wires all over makes it annoying. I printed mine in Overture PLA, but PETG may be better recommended if using outdoors in heat.…
The speakers on the T480 are bad. I've roughly drawn out the dimensions of the original assembly so that I can add some new speakers that hopefully will improve the sound quality. The printed versions fit in the original slots and can be…
ORGANIZER GT480 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is an experiment, if you do try this then it will be at your own risk. Decided the stock speakers were bad, so I ordered some iPhone 15 Pro speakers to mod into my T480 as an experiment. The speakers are held in with friction and…
A remix of the original with support for fixing the stands to a wood desk using 5mm screws sat flush diagonally.
There is a bit of clearance above battery cells and for generic bms, no supports are needed, lid can be printed but not required it's already too thick as it is so case can be mounted directly without lid, if proper insulation for cells,…
There is a bit of clearance above battery cells and for generic bms, no supports are needed, lid can be printed but not required it's already too thick as it is so case can be mounted directly without lid, if proper insulation for cells,…
Thinkpad T480s bottom case Still alot of work to be done. Free free to modify to your needs. Print out of ABS or PETG at least...PLA WILL warp after a few days use.
Upgraded my Ryobi ZT480e (zero turn) to LiFePO4 48v 100Ah batteries and used QWORK Battery Monitor from amazon, it should work with the CAMWAY gauge as well. Just push your gauge into the mount and push the mount into the cup holder. It…
Remix of thing:4463146 that keeps the laptop at a lower angle Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any PLA Any How I Designed This =================== Category: Computer
Not my best work, lol. I broke 4 hinges while prototyping this. Set the layer height to as low of a value as you can, I printed with 0.08 layer height. If you notice that the keycap didn't print quite right, do not try to put it in, you…
Remixed stand to fit Lenovo t480 Heavy infill suggested as it will be supporting an expensive piece of equipment! Print Settings Printer: Craftbot+ Rafts: No Supports: Yes Resolution: 0.2 Infill: 45% Category: Office
I made this in order to reduce the desk footprint of my thinkpad t480s which I mostly use attached to a docking station and external displays while at home. It may fit other thinkpads and other laptops of similar shape and thickness…
