1 / 2
Secondary battery for t480s on 146074 hv cells — image 1
1 / 2

Secondary battery for t480s on 146074 hv cells

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My little doohickey to get a day worth of battery. Can fit 3 hv 10ah cells and generic bms.

Rating
0 / 5
Likes
3
Downloads
6
Makes
0
Views
207
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

There is a bit of clearance above battery cells and for generic bms, no supports are needed, lid can be printed but not required it's already too thick as it is so case can be mounted directly without lid, if proper insulation for cells, bms and wires is used.

Model specifically for  10Ah HV(4.4v) 146074 cells, don't use normal cells(4.2v).
Bms used in this project is not proper for these batteries and charging should be limited after mod or proper bms selected that can balance and protect 3s 4.4v per cell battery. M3 flat head hex bolts are used to fix battery to the case, but it is not recommended because of slim design of t480s. 

I thought it would be funny project and it was, you can replicate it if you want but beware, batteries are fire hazard, you can do everything right and end up with a housefire nonetheless. 

Battery terminals are connected directly to copper planes above original lenovo battery terminals in parallel and voltages should be matched before assembly and between original battery and secondary at least to 0.1v difference.

Tags