Counting matching models…
A simple tablecloth clamp in two sizes, with a 15mm gap and with a 21,6mm gap. I am attaching the STEP files and a link to OnShape as well. OnShape Link Note: Please don't forget to leave a rating or a comment. Feedback is important for…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Small household equipment, perfect for windily summer days.
The Tablecloth clip is made for a 22mm table but can be scaled to fit different sizes.
needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…
Needed some clips for the table cloth in the garden especially on a windy day. These fit exact. Sketchup model included for mods if needed. Print Settings Printer: Geeetech Aluminium i3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Je ne pouvais plus supporter les clips ( pinces ) pour nappe de table en métal… Ca rouille ca ne tient pas bien du tout. Alors voilà je me suis inspiré d'une création que j'ai remixé et on a un truc sympa idéal pour les tables en bois ou…
I recommend to print with PETG or ABS, or other similar flexible material. Infill: 100% Layer high: 0,2 Material :PETG Wall thickness : 3-4 walls
My first model that I made and printed myself. It works for my table from Jysk. But if you need some modification just use CAD model in Onshape and modify the sketch to match your table. I used 0% infill and 3 perimeters and works well…
My first model that I made and printed myself. It works for my table from Jysk. But if you need some modification just use CAD model in Onshape and modify the sketch to match your table. I used 0% infill and 3 perimeters and works well…
printed in ASA 0.2mm layer height on K1C. requires brim to avoid warping. Uploadet V2 which is quite shorter.
I recommend to print with PETG or ABS, or other similar flexible material. Infill: 100% Layer high: 0,2 Material :PETG Wall thickness : 3-4 walls
Tablecloth clip A simple tablecloth clip for tables with a plate thickness of 18-25mm. When using PETG, suitable for indoor and outdoor use. Print instructions - material: PETG - infill: 100% - layer height: 0.2 mm
This was designed to be compatible with Wyrmwood's Modular Gaming Table. It allows for a tablecloth to be pinned to the table, preventing it from sliding off. The MagAdapter is designed to accept 3/8"x1/8" round magnets. I purchased these…
Simple but effective tablecloth clamp/clip. Made of Elegoo transparent Rapid PETG 250°/70° C, 250 mm/s. A prototype was made of PLA+ 210°/50° C, 100 mm/s, 0.24 mm layer and 25% fill.
For table thickness 12 mm and up. Do not print in PLA. I suggest PET-G for UV resistance and better tension durability of this material.
This thing require power tool (electric driver etc) and 4mm Screw. layer : 0.2 mm infill : meaningless adhesion type : brim will works better Category: 3D Printing
A tablecloth clip holder I designed in a hurry since one was missing for a kids party. Scalable in slicer.
Simple Tablecloth Holder in 3 different versions. Select the version you want to print. Files are marked as v1, v2 and v3-A / v3-B (both needed) as displayed on the image above from left to right. The .3mf files are pre-configured for PLA…
Easy to print, no supports needed. I got this model on thingiverse by: 2Kperformance
A quick clip for those Forest Service tables that are 2 1/2" thick Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .2 mm Infill: 10% Notes: All the clips i found are for the common garden table so I…
I designed these magnetic clips to fit the accessory rail on my gaming table, because paying $50 for a few bits of wood with magnets screwed to them seemed silly. they are designed to take 6x2mm magnets. depending on how precise and…
The print is 12 mm high. To achieve the same effect as mine, with a grid for mice in the middle, add color variables in the middle and place a 220 mm x 220 mm grid on top. You can use magnets to make it stick better to the print.The print…
Just a simple clip to hold my tablecloth on the table... so the little monsters don't pull it off
Quick to print but sturdy table cloth holder clip. Original is designed for 20mm thick table. In your slicer, resize accordingly to achieve a different table thickness: Thickness (mm) Scale (%) 15 75 16 80 17 85 18 90 19 95 20 100 21 105…
Use this clamp to attach a robe with some textile, like Pavilions ie. My use case is to pull the pavilion roof taut with rubber rope. No more water bags! Ideal is a M3 16mm screw for this clamp. Category: Household Supplies
28 mm clamp – suitable for use as a sturdy tablecloth clamp Clamp width 40 mm. I use it as a tablecloth holder in rooms intended for celebrations (it has to be really sturdy). The geometry of the original model has been modified so that…
28 mm clamp – suitable for use as a sturdy tablecloth clamp Clamp width 40 mm. I use it as a tablecloth holder in rooms intended for celebrations (it has to be really sturdy). The geometry of the original model has been modified so that…
Designed to securely attach to the edge of a table, it prevents the tablecloth from slipping or blowing away. Ideal for both indoor and outdoor use. This model features a clean, minimal design. It is optimized for easy 3D printing without…
Keep your tablecloth securely attached to your outdoor table with this simple snap-on clip designed for plastic garden tables. The clip slides easily onto the table edge and helps prevent the tablecloth from moving or lifting in windy…
This tablecloth clip holds your tablecloth in place. Perfect for outdoor and indoor situations. Multiple sizes for different tables. Make sure to pick the right one. It comes for 50 mm tables, 40 mm tables, 30 mm tables and 20 mm tables.…
This model can be used for preventing your tablecloth to be blown away from your table and/or to hold your phone.
This is a quite easy print. During the print it was coming loose, so i suggest a brim of 2 or 3 perimeters. Infill: 0% Perimeters: 3
A simple clip for tablecloths. Needed some for my table in the garden. Easy to print. No need of much filament. You probably should think about using PETG. My own clips are currently printed with PLA, and are black, as you can see. I…
Tablecloth holder, made with my tables measurements. You can find the tinkercad link here as well: https://www.tinkercad.com/things/hwDHDSobuMe
Ordinary tablecloth holder for 18mm tables, easy to print :) I suggest you to use PETG, flexibility of ordinary PLA is not enough to hold the part in place ;) Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: %20…
Simple spring clip to hold a table cloth (or whatever else). Various sizes. G code files for 0.4 and 0.6 nozzle attached. Consider printing with PETG since its flexible (in comparison with PLA.)
A simple parametric window stop / tablecloth clamp made in Fusion 360. I needed something to stop windows from hitting one another too hard when open. Printed out of flexible filament to dampen impacts (eSUN 85A flexible filament, 20%…
Prichytí obrus k stolu. Niekoľko veľkostí. Attaches the tablecloth to the table. Several sizes.
This tablecloth clip can be used with table from 3 to 7 cm thick (+/- 0.5 cm). I used PLA, 0.2 mm, 20% fill, no supports. Update: I made a new version with a lower back elasticity (using a larger external profile) and uploading one file…
The IKEA SOMMARFLOX tablecloth weights are made of stainless steel, so they can accidentally damage your furniture by dangling and your floor tiles if they snap off. This sturdy cover prevents any damage, while still showing the nice…
We have a table with a cloth and a protective plastic sheet over it. Usual clips were unable to keep everything in place (clipping load much too small, clips eventually gliding). These clips do a good job and do not damage the table nor…
Držák ubrusu na plastový zahradní stůl. Tablecloth holder for a plastic garden table.
printed in ASA 0.2mm layer height on K1C. requires brim to avoid warping. Uploadet V2 which is quite shorter.
tablecloth clamp Useful and simple tablecloth clamp for windy days in the garden. I used PETG
120mm long tablecloth clips to clip the tablecloth for windy weather. SLDPRT Model included for mods if needed.
Made this for my in-laws and they loved them. I made from Matterhackers PC Carbon Fiber and i haven't made with other filaments yet but sure they'll work. This design is with a 22mm opening and flexes to around 30mm. Other sizes to come.…
Tablecloth clip A simple tablecloth clip for tables with a plate thickness of 18-25mm. When using PETG, suitable for indoor and outdoor use. Print instructions - material: PETG - infill: 100% - layer height: 0.2 mm
You can secure the blanket easily with one screw. This is a weight for a tablecloth or blanket, it includes also a anchor which u can use to secure the blanket. To make this past as heavy as it is you need to put 4 M8 nuts. To put them…
