Counting matching models…
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Print approx. €27.16–€33.20 excl. taxPreliminary estimate for one variant
Design Concept This AI image tag keychain concept is inspired by the image tag from Printables.com. The design features a microchip-style emblem with 'AI' prominently displayed, symbolizing artificial intelligence. Applications Designed…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I liked design8studio's open featherboard model, but it was just a little too big for the Prusa Mini build plate. So I trimmed the back off of it while keeping the fingers the same. I also reduced the thickness of it in a few areas to try…
Print approx. €5.90–€7.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a nameplate that contains the logo of Printables® in it. Enjoy!
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Impression simple sans supports. Augmenter le nombre de périmètres à 3 pour les parois verticales permet de renforcer la solidité des pieds. Vous pouvez aussi choisir “Compléter les objets individuels” dans les “Options de sortie” des…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Hello, so I made a couple of Spoolholder Caps in CAD I share .step, .dxf of logos and ready to print .3mf files Enjoy! Btw, check out rest of my cap designs in my collection --- Commercial Use --- By purchasing this design on Cults , you…
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for one variant
you might want to print in more contrast than white and orange.
Print approx. €1.89–€2.30 excl. taxPreliminary estimate for one variant
This bead prints in 3 pieces and is easy to assemble. Glue should not be required. The pieces should snap right in with a little attention to the geometry of the pieces.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Make the IKEA Lack table stackable. There are models to increase the height by: 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm For fastening you need 3,5 mm countersunk screws. For length see file description.
I needed a tablespoon that could reach down in a big bag/container for my powdered drink supplements. I gave a basic kitchen table measuring spoon a longer handle. Please print this in PetG for food safety. you might want to tweak the…
Multiplication tables as Domino tiles puzzle. Every tile is broken into 2 pieces. Find the right answer for each multiplication and check if the tiles fit together. A storage box for 10 tiles is also available. Print instructions…
Table saw pushstick, quickly drawn to fit my Prusa MK3 print bed. Original design found here Print instructions Category: Hand Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .6mm Nozzle, .4mm…
cartridge alignement protractor, Baerwald type. Imported from Entropy4U @thingiverse
I made this part to test Akula-class motion system with Magnetic IDEX toolheads. Dual color 1-inch ABC Cube only 128 tool changes with 0.2mm layer lines. Magnetic IDEX and Akula-class motion system is really something special 😊 ABC Cube…
An attractive grid and number tiles to help with learning your times tables. Pick a number tile and place it in the correct square in the grid. Continue until all the tiles are in the correct square The model was printed on a Prusa Mini+…
Miniatur LAK tables in differene sizes 1:5 1:10 1:20
Joy Round Soft is a member of the Thingiverse Holiday Collection. At the bottom of this summary, you’ll find a list of all the members of the collection. Joy Round Soft has soft edges and is smaller than Joy Round. It prints great in one…
2 different handle sizes to choose from.
I remixed the design from William_Additive so i can use it on the corners of glass tables (up to ~9mm thickness). I also cut a tiny bit off of the bottom of the original things, because i got no usable first layer with them (see attached…
carrot and aubergine to which the leaves attach themselves magnetically. 5x2 mm magnet.
For an additional tabelsoccer point set or replacement of the old one.
Heyhooo Here I have two prusa/ printable fan beads for you! I like them both but it is up to you to choose one! For the dual color version you will need a MMU or XL though :) Sizes: The Single colored version comes in 3 sizes for the…
TableSoccer counter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Gembird PLA black, red, yellow Category: Toy & Game Accessories
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
Printables Visor Cap - wearable Print the Headband with TPU
A compact tablespoon measure (15 ml) for use in smaller jars. Easiest to print upside down
I wasn't suuuper happy with the fancy dining table rounded I made a while ago so I wanted to make simple rectangular ones with my favorite wood grain technique. I also borrowed a practice from a table I had printed when I first ran the…
I greatly appreciate every like, download and make! Designed with a lightweight Printables theme that doesn't sacrifice the original Pulsefire comfort and performance. Models are split by color for easy multi-color printing. No AMS…
This Model can be printed without support. You can adjust the size to your liking. Assembly Instructions: Print one copy of each model. There are three holes on the bottom. Insert the chip into the hole that fits it perfectly. ‼The reason…
This plane is a mix of a prop plane, c17 Globemaster, Boeing 777, and just an abstract design. The plane is still a work in progress and is currently in the early stages of design. Files in order of assembly. We kindly ask you to please…
I designed this Printables Coffee Coaster made in two parts to enter into the Flash Contest: Single Extruder – Dual Colour. I have an Ender 3 V3 SE so this was a perfect contest to take part in. I used Prusa PLA Galaxy Black and Orange…
I just ask that you follow me, nothing more. EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem nada mais…
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful. Don't forgot to check my group, the…
The box is excellent storage for the grid and number tiles, at home or at school. The design was limited by the 180x180mm print bed of the Prusa Mini+, so with no room for hinges and catches the box lid is held in place by two printed…
Braucht ca. 2g Filament und 10 min Druckzeit. PS: Über einen Like und ein Make würde ich mich freuen. PPS: Schaut euch mal meine anderen Modelle an ; )
For the fans! Two files, one for single extruder machines and other for multi extruder or mmu machines
Litterally the smallest thing on printables. Simple.
A cookiecutter with the printables Logo. Cuts cookies which are 50 x 20mm big, if you want to make it smaller or bigger you can easily scale it.
This is a 3D-printed hoodie drawstring bead that features the Printables logo. The Printables logo is prominently featured on the bead, crisply printed with a visible layer pattern. The bead is designed to be a functional and stylish…
PLEASE HELP ME MAKE THIS GET BIG. PRINTABLES VERSION RELEASED \0/ This is a 3D printable Printables QR Code Keychain, which also has a changeable qr backing, so if you want to use a new QR you don't need to reprint the entire thing. Any…
Print Settings: 3 or 4 wall .2 first layer .16 layer after. 15% gyroid or adaptive cubic. Filament Swap: Manual change at Layer 18 (2.92mm). (Or paint in the slicer if you have ams/ifs or equivalent) No Supports: Prints clean and flat on…
This project is an open-source learning aid designed to help children with dyslexia or other learning disabilities follow multiplication tables more easily. The system uses two sliding guides (one horizontal, one vertical) that move over…
A collection of lovingly designed tables for dolls/minifigures. Table legs with different spacing to accommodate figures of different sizes/widths. Customizable by using different filaments (e.g. EONO Conductive PLA) or wrapping with…
It’s a Printables logo but also a keychain, color it with sharpie if you don’t have a fancy printer that does multiple colors
i Printed some in petg some in pla all seem fine in the pollytunnel not tried outside/ in greenhouse reccomend petg or similar uv resistant for outside/green house. will add more as i make them. Upload your makes always interesting to see…
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
I put this together for something else and can't see it else where so here you go.
I greatly appreciate every like, download and make! Designed with a lightweight Printables theme that doesn't sacrifice the original Pulsefire comfort and performance. Models are split by color for easy multi-color printing. No AMS…
Joy Round Soft is a member of the Thingiverse Holiday Collection. At the bottom of this summary, you’ll find a list of all the members of the collection. Joy Round Soft has soft edges and is smaller than Joy Round. It prints great in one…
Just a small time killer. Print flat, add color change after 6mm. be sure to calibrate the printer to avoid fused parts. I highly recomend to use Prusa galaxy black and Prusa Orange. :)
General: A simple clip-on robot vacuum barricade Why I designed this: I designed this because my robot vacuum gets high centered almost every day on my couch table. Printing notes: Layer height: .2 Recommended Material: PLA or PETG…
The plastic base of my stool has completely disappeared into the chair leg. So here is a base that I designed using Tinkercad. I actually made it for a different chair. It works for all chairs or tables that have a round tube as a leg. In…
Awesome calibration test with fun logos, test text and logos, and calibration, and leveling!
This is a basic remix of user David's 2 tablespoon scooper design. I simply made the handle much, much longer for extra reach into my ground kawwfee container. The 2 tablespoon size is perfect for my needs and the original design is…
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
This tube and thread should work on most tables with a 2" thick tabletop. (My lack is the 35 3/8" x 21 5/8" coffee table variant, number 904.499.05 .) Drill hole with a 5/16" bit or similar. Works with 1.75mm filament. Print upright, with…
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
This model is a recreation of the octahedron from Tablestory's GONE. The octahedron body is provided as well as a panel which can be copied 16 times, printed separately, and glued to the body to include the dual-colour pattern without…
Inspiration At work we have Manuflex® industrial tables for lab usage. I missed a part to deal up with cables lying or hanging around there. So I played around with OpenSCAD to design something useful for that that purpose. These tables…
Show off and commemorate the love and appreciation 🥰 the Prusa Printables community gives you for your published models, makes, articles, posts or anything else that is liked with one of these custom fan made badges. Each features low…
[Thanks to download! If anything below is unclear, please let me know.] These side tables for the Original Prusa XL are ideal for those who feed filament directly from filament dryers. The tables mount to the 30mm aluminum extrusions and…
It’s a Printables logo but also a keychain, color it with sharpie if you don’t have a fancy printer that does multiple colors
This is an expansion wave of super axos! for the rules look in wave 1! Stats: Bikeottl: 3Atk 8HP +7Wkns Unilotl: 1Atk 10HP +11Wkns M3CH-0-10TL: 9Atk 12HP +1Wkns For optimal playability print Flame in red, Sea in blue, plant in green, robo…
A hook designed to attach to the edge of an open flight case, providing a convenient spot to hang DJ headphones while using your turntable. Perfect for DJs, audio technicians, or anyone looking to keep their workspace organized. Fits a…
Due to their smallness, I found it difficult to fit the prints of the original models of the numbers and their circular holders into the badge bases when printed separately. I combined these models and did this for numbers 1-6. This…
Bierbank Bodenschoner Damit der Boden nicht verkratzt wird. Kann mit einem Kabelbinder nochmal fixiert werden. (Sollte aber auch so halten) TPU Infill 30% Auf die Orientierung achten Mit Support gedruckt (Manuell) Beer Tables/Benches…
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful. Don't forgot to check my group, the…
Design Concept This piece is a stylish display stand for your collection of Lego Minifigure F1 cars designed to clearly and securely hold the complete series of 12 models (not included). There is an optional leg for the stand, or you can…
Just an idea and a test, intended for TPU Resize as you wish Print untested. I do not have the means to print it myself. Feedback appreciated. logo from C2CCoder
Do not leave your hard-earned Printables.com badges hidden! Clip them to your IKEA Skadis board or Lack shelf and show them off! This model contains two parts: Base that is used to clip your badge into Clip - either for Skadis (the board)…
Print Settings: 3 or 4 wall .2 first layer .16 layer after. 15% gyroid or adaptive cubic. Filament Swap: Manual change at Layer 18 (2.92mm). (Or paint in the slicer if you have ams/ifs or equivalent) No Supports: Prints clean and flat on…
A 2 part replacement hinge for a inventables carvey, as mine both snapped in 3 places. Uses original mounting hardware (4x m4x10mm bolts) and a 5mm metal pin. mine was 50 mm that i trimmed down to 43mm, the required length. print with a…
Heavily edited model of a Printables lightbox, redesigned to be printable on any 3D printer.
⚠ IMPORTANT For this model to look its best, a 0.2mm nozzle is absolutely essential. Using a standard 0.4mm nozzle will result in a significant loss of detail, and the final print will not meet the intended quality. This is a fan-made…
This is my attempt at creating a set piece for a town in D&D. I'm sure it can be used in other RPGs. I have scaled this model to a 32 mm scale. This model comes in two pieces. It has a dovetail cut to make it easier to place back…
Simon productions has introduced... among us items! you may now enjoy a blocky airship (just a prototype, a non blocky version coming out soon!
Stopper for model https://www.printables.com/model/442943-modular-socket-organizer-complete-set/files 2 versions
These measuring spoons are printed in two colors using filament switching; this is not strictly necessary, but as you can see from the photos it makes the print very easy to see. Assembly and Use To keep all of the spoons together, you…
This model requires supports for the hooks. This is not for funko pop boxes as they're a bit bigger than the ubicollectables boxes.
Every couch is a center of relaxation, so it makes sense to have simple solutions that keep everything close at hand without taking up too much space. The armrest tables theme includes all kinds of useful accessories, from basic trays to…
This Model can be printed without support. You can adjust the size to your liking. Assembly Instructions: Print one copy of each model. There are three holes on the bottom. Insert the chip into the hole that fits it perfectly. ‼The reason…
Arm Rest Tennis & Basketball Tables — Functional Design for Sports Fans Bring stadium energy right into your living room with these 3D‑printed armchair tables inspired by tennis and basketball patterns . Perfect for any sports enthusiast,…
The original model only had a base for the Beginner level. I've modified the text to say Novice and Explorer. You'll need the rest of the parts from the original model.
American Football & Baseball Armchair Tables — Functional Design for Sports Fans Bring the excitement of the game into your living room with these 3D‑printed armchair tables inspired by American football and baseball patterns . Perfect…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
