Counting matching models…
Deutsch: Ein Schärfer für Schneiderkreide, damit die Schneiderkreide wieder am Stoff anzeichnet. Der anfallende Kreidestaub wird am Boden aufgefangen und kann später entsorgt werden. Druckeinstellungen: Drucker: Prusa Mk 3.9 Rafts: Nein…
I wanted initially a holder for sewing tailor's chalk, but since I saw there was a sharpener model posted on printables by creator @sannyt, I decided to integrate to design into it. I modified the sharpener to have 6x2mm magnets, but you…
Snap together tailor tape measure winder/storage mechanism There are two options to choose from: 12mm tape version 15mm tape version
I made a quick remix on Evan's design to work directly with the "JJC Slide and Film Remake" light that can be bought here at Amazon
Filament: PET-G, Layer Height: 0.2mm Glue together after printing.
This tailor-themed pen holder is designed for anyone who lives and breathes the world of fashion, sewing, and creative design . Inspired by the iconic figure of a dressmaker, with details such as glasses and scissors , it is both…
I wanted to make a phone stand which would use the cars existing form as much as possible. The process stared by 3D scanning the car inside by Marko Horvat. After i processed the scan I created the model using FreeCAD. The model was…
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
Doing exactly that, holding taylor chalk. I printed it with PETG, should easily be possible with PLA as well. Prints without supports. Print instructions No special filament needed, 20% infill works fine, no supports needed. I printed it…
Behälter für ca. 19mm breite Bandmaße zum aufrollen und sicher verstauen
A simple holder for fabric tape meter (up to 1.5 m -2 m long; height 2 cm about). Container with rewind of the tape. No supports Printing time (0.3 mm, speed 30 mm/s): about 2.5 h Print Settings Printer Brand: XYZprinting Printer: da…
A simple model to hold tailors chalk with a lid that clips over the top to protect the chalk when not in use. The chalk I'm using is about 39mm wide by 32mm tall. Printed in PLA without supports, if you orient the solid sides of both down…
This is designed for my Ikea Alex drawers because the top drawers are not tall enough to allow the scissors to stand up. I know not everyone needs the glue holder, but I didn't want to waste anymore space with this base since it is…
This is a work in progress, Will try to make it more solid and easy to print later on. Also I think the walls are too thin right now for most printers. You probably need to scale it up atleast 1.5times for it to work. Post-Printing Use…
This is a simple replacement housing for the Nordic Power Profiler Kit II. It is specifically designed to be small enough so that the PPK2 can fit into an Altoids tin.
I needed a SKADIS compatible holder for my Milwaukee Rotary Tool (M12) and wasn't satisfied with the current ones available. The holder is tailored to the shape/curve of the rotary tool to hold it securely and is locked tight using a…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Google's Pixel 8 Pro smartphone can be used as a webcam. I designed this mount to hold my smartphone on the back of my laptop. The model consists of three seperate parts that you can orient & print without supports. The two sides slide…
Unleash the power of precision 3D printing with this stunning anime warrior figurine that brings fierce elegance to life! This expertly crafted STL model features a dynamic female fighter wielding an oversized blade, perfect for creating…
I don't know the first thing about tailoring, but I do know about knives and sharpening. That's why I made a chalk sharpener for my beloved to make her hobby easier. The sharpener allows you to achieve a very refined edge, allowing you to…
Po vytištění může jít zavírání a otvírání krabičky špatně. Stačí ji několikrát opatrně otevřít a zavřít. After printing, the closing and opening of the box can go wrong. Just open and close it several times.
Soft Tape Measure Case Have a roll of unruly measuring tape? Want to keep it nice and tightly rolled up with something more elegant than a rubber band? Then look no further - this quick & easy print is allyou need. Less than 5 g of…
This organizer holds 3 standard tailor's measuring tapes (5cm / 2in diameter), stacked on top of each other so they can be neatly tucked away instead of flying around in that one drawer that has all the random stuff. The slit in the…
2x2 Gridfinity holder for 4 tailors chalk wheels and up to 9 chalk refills. Photo is of an earlier iteration, which turned out to be perfectly sized to get the chalk refills stuck. Screenshot is of the updated version.
This was made by WingedBirdStudios, so any attention goes to them!
the cover plate has a sharp edge, this fixes that
A simple organizational holder for a tailors tape measure. It accommodates a reel 50 mm in diameter and 14.5 mm thick by default, scale the object as needed in your slicer. One version is flat and can be mounted with adhesive or…
Flexible Tailor Hitch: Printed with TPU
A pen case featuring an optical gradient snow leopard pattern on the sides. Instead of traditional color blending, this model achieves a smooth, textured gradient by alternating two different filament colors layer by layer and protruding…
I made this to protect my beloved KAI N5240 sewing shears - every sewist/seamstress knows the pain of bumping something into your beloved shears, or hearing them scrape against anything in the drawer. This quick and easy print solves this…
Works together with my A4 H2O bumpers: https://www.printables.com/model/1459646-dan-a4-h2o-bumpershttps://www.printables.com/model/1459646-dan-a4-h2o-bumpers I designed this case insert to have a nice way of securely storing all my PC and…
This tailor-themed pen holder is designed for anyone who lives and breathes the world of fashion, sewing, and creative design . Inspired by the iconic figure of a dressmaker, with details such as glasses and scissors , it is both…
This was made by WingedBirdStudios, so any attention goes to them!
Snap together tailor tape measure winder/storage mechanism There are two options to choose from: 12mm tape version 15mm tape version
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
A simple holder for fabric tape meter (up to 1.5 m -2 m long; height 2 cm about). Container with rewind of the tape. No supports Printing time (0.3 mm, speed 30 mm/s): about 2.5 h Print Settings Printer Brand: XYZprinting Printer: da…
Google's Pixel 8 Pro smartphone can be used as a webcam. I designed this mount to hold my smartphone on the back of my laptop. The model consists of three seperate parts that you can orient & print without supports. The two sides slide…
“Chalky” Chalk Sharpener A simple sharpening box designed for sharpening a tailors chalk for tailoring or sewing. The model is divided into three parts: Main Body Finger Guard Chalk Holder The fingerguard and Chalk Holder should be…
Holds 9 pieces of chalk. Uses 2 x m2.5mm x 16mm BHCS or SHCS. Prints with no support.
This is a replacement case for a tailor's tape measure! It's manually wound up, and is a multi-piece assembly that is friction fit. Print Settings PLA+ was used Walls: 8 walls Layer Height: 0.12mm Turn on ironing! Randomize Z-seam…
Модель предназначена для скручивания портновского метра шириной 20 мм и длиной 2 м (1,5 м).
