Counting matching models…
Please be aware that your printer has to be well adjusted, as the tolerances are somewhat small. E.g. elephant foot will cause you grievances. I prined the dials and the top with color changes (M600), otherwise it was pretty unreadable.…
Pay attention to the naming of the file - it has clues as to which antenna/camera/tilt degree... The core, blaze, and OCP antennas are upgraded TrueRC Antennas that can be purchased separately. Update: the extended O3 DJI camera mount is…
you won't play with plastic boules but for a target ball (bouchon or cochonnet) that fits your design if you want a deeper groove use the small sphere (∅ 30mm) and scale it up for printing. A smaller groove is possible by use the bigger…
El diseño necesita soportes, no son muchos, pero si es necesario para que se imprima bien, te recomiendo que uses soporte de arbol, ya que es más fácil de quitar, puedes ajustar el modelo al tamaño que quieras, hasta para poder usarlo…
Gedruck mit PETG 20% Infill 0,2 Layerhöhe Farbwechsel bei Boule Zähler oben und Stellrad, nach 0,4 mm Stützen, nur auf dem Druckbett, bei: Boule Zähler unten Boule Zähler Oben Boule Zähler Bügelhalter Boule Zahnrad 2x drucken. Boule…
Hallo Zusammen! Hier habe ich einen faltbaren Petanque Abwurfkreis mit einen Innendurchmesser von 50cm. Die äußeren Pins müssen etwas eingepresst werden, weil sonst der ganze Kreis zu locker wird. Anschließend werden die Pins ineinander…
Bambulab P1S 0.4mm nozzle 0.2mm layer height PLA+ 3 wall layer 30% gyroid infill Slice gap closing radius to 0.00 Pause at layer 30 for color change Top surface smoothing yes
this is a quick small ball in two halfs as I lost our small cochonnet to play petanque. actually so simple that it's almost not worth uploading, but maybe it's helpful for someone. screw it together with a M4 screw.
modifications to the original add graphics related to specific event ensure graphics is in a single layer (via MMU or M600 embedding) spring bump can't be plastic because: a) wear out; b) it's not smooth enough (not even on 0.05m) =>…
I designed different models for boules from 72 to 75mm and one universal size. Easy print, nothing special.
En INGENIOS se asumen las responsabilidades de un jefe de fábrica; balances, infraestructuras y producción de: Robots, Cohetes y Tanques. Diseñado por MaaB , actualmente en promoción en distintos blogs, eventos y plataformas de micro…
Bambulab P1S 0.4mm nozzle 0.2mm layer height PLA 3 wall layer 30% gyroid infill Normal support yes Top surface smoothing yes
Nozzle: 0.4 a 0.8 Cama:50-60 C Velocidad: 60mm/s Soportes requeridos para parte intermedia, recomiendo darle la vuelta y colocar soporte sobre el piso para no obstruir la rosca Partes inferior y superior no requieren soporte Compensacion…
2x Magnet 10x2mm Category: Sport & Outdoors
This is a Pétanque Jack that prints in two halves, to ensure it prints cleanly without supports on an FDM printer. No extra hardware or glue is required - the two halves screw together using the printed stud. The jack is the regulation…
This is a remix of the Arm Protector for the Rotor Riot TANQ 1 and 2 as the arms are the same. Got tired of chopping and having to resolder my Fly High FPV LED strips everytime I got in a good crash. Clear TPU actually disperses the light…
Introduction I play pétanque at my local pub (The Wheatsheaf, Tattingstone, Suffolk, UK) and our old scoreboards got very shabby, eventually breaking. I decided that we should have something better - but, like all these bright ideas, the…
Lo unico que tiene movimiento es la torreta, las orugas son estáticas
A great Wall Art of pétanque. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
This is a key-chain holder of a pétanque ball.
I was having issues with the original Tanq-S mount for the 04 stock antennas being too thing and ripping. So I made a beefy version of it! Still works with the ELRS antenna mount as well as the 04 air unit mount ( which I also remixed to…
A great Wall Art of pétanque. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
2x Magnet 25x3,7mm Category: Sport & Outdoors
Se trata de la tapa del tanque de agua para la maquina de cafe automatizada de la marca L'Or. No es necesario imprimirlo con soporte. Se coloca en tu laminador con el perfil que tengas y listo
A Petanque (Boules) Display base, prints well on its side.
Pour les mettre en évidence ou simplement éviter qu'elle roule.
A great Wall Art of pétanque. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
This device measures the distance between the jack and the boule . This way you can see which player has come the closest. The assembly is straightforward, you only need a thick wire that stretches very little, so the measurements are…
tanque apc aliens (alien 2) Crash Derby Cars juego de mesa
Een eenvoudig petanque scorebord met 3 rijen en 3 pluggen. Zo kan je met 3 apart spelen. De pluggen hangen vast met een touwtje en een druppel secondelijm. Aan de bovenkant en onderkant is de vullen 80% om een bevestiging aan vast te…
Support mais s'imprime facilement PLA 0.2 hauteur de couche Buse 0.4
Raised A/B letters for an easy filament colour change, a hanger loop, snap- fit
Tapa para tanque de cría de Fitoplancton con entrada para oxigeno y salidas de aire. Para tanque circular de 15 cm de diámetro. ----------------------------------------------------------- Lid for Phytoplankton breeding tank with oxygen…
These are the ultimate bando protection for your motors on you Tanq! Designed to go around the motor and protect them. I was tired of breaking motors so I designed this. Still works with the skid pegs from Let'sFlyRC Print in TPU. Use…
llavero tanque de monte grande. ZONA SUR DE BUENOS AIRES ARGENTINA
Hi, I have an old Yamaha banshee four trax (Model), but after of many years an some kids the banshee lost some parts. Here is were 3d printing saves the old toy. And I've started designing a fuel tank replacement to complete the shape of…
Replica realizada para sustituir la original deteriorada (rota). Las fotos han sido realizadas 10 meses después de su adaptación y el resultado como se puede comprobar ha sido muy satisfactorio.
Estoy aprendiendo Blender y decidí crear esta torreta para imprimir, más adelante intentaré hacer el cuerpo.
Este es un modelo 3D que puede servirte si estas haciendo un prottotipo a escala de una celada de flotacion
Has dicho: tanqueta geyperman La Tanqueta Geyperman (oficialmente comercializada como Carro Blindado ) es uno de los vehículos más icónicos y cotizados fabricados por la marca española Geyper durante los años 70 . Es una réplica a escala…
EN: parametric box for 8 pices of petanque balls with tpu shock absorbers, no lid. Tested on 73mm ball, PLA body and TPU seals CZ: parametrická krabice na 8 koulí na patanque s tpu odpružením, bez víka. Testováno na kouli s průměram 73mm,…
Je vous présente un jeu de pétanque indoor pour égayer les apéros ou tout simplement pour jouer en famille lorsqu'il pleut. Et toujours dans le thème, ça peut également servir de dessous de verre et de capsule pour éviter que les insectes…
for petanque precision shooting game training ，station 2 、3、 4。
🇫🇷 Présentoir pour 19 cochonnets de pétanque Présentoir simple et pratique permettant de ranger et d’exposer jusqu’à 19 cochonnets de pétanque. Le modèle maintient chaque cochonnet dans un emplacement individuel afin d’éviter qu’ils ne…
O3 Air Unit and HGLRC GPS/Mag antenna mounts for Tanq2. The GPS mount fits several antennae including HGLRC M100 and M100-Pro. It is tilted up 45 deg to maximize coverage when actually flying (nose tilted down). Be sure to let Betaflight…
If you need more protection for your DJI O3 Air Unit camera on your Let's Fly RC Tanq2 frame, try this. I designed these to be printed with TPU. The left and right halves should be printed separately as well as the dowels and optional…
This magnetic boule and boccia pick-up helper is the perfect accessory for anyone who wants to enjoy the game without constant bending. The part is first 3D-printed , then four 2×8 mm magnets are pressed into the slots, and finally a 2–4…
A snap-on TPU arm boot for the TanqS. A raised 200 degree shield wraps the outboard side of each motor to protect them
Este es un modelo 3D que puede servirte si estas haciendo un prottotipo a escala de una celada de flotacion
The Tanq-S may be a little small to be hauling a Go Pro, but I wanted to see if I could make it! So here you go Use with the o3ProtectedBottomOnlyCameraMount20Degree.stl from here https://www.thingiverse.com/thing:6374477/files
Go Pro mount for the new DJI 04 air unit to work with the Tanq-2
Not sure why you would want a gopro on a tanq-s but here you go!
🧩 Características del modelo: Diseño compacto y fácil de imprimir Torreta rotativa (opcional con ensamblaje) Rieles, escotillas y cañón modelados en bajorelieve Versión sin soportes y lista para escalar Perfecto para ambientaciones tipo…
