Search results: tanto

~*THE ULTIMATE*~ Tanto Blade Styled Combat Knife/Short Sword *Self Defense Model* - Fully Printable*

CS GO Knife - Huntsman Fixed Blade Tanto Bowie Knife

I've decided to try and model/print as many CS:GO knives as I can. I am trying to get better at modelling in Fushion and this is helping a lot. Any advice or criticism is welcome and appreciated. Let me know if you print it! Print…

Japanese Tanto Knife

A tanto knife with a removable sheathe and customizable scales. I positioned it standing straight when I printed it to minimize supports on the blade spine. The print will have better results at slower print speeds for less wobble near…

BenchMade BM63 Balisong - Circuit Tanto

I took a look at admin's "Benchmade 62 balisong butterfly knife M3 fasteners" and I was inspired to make it just a little bit cleaner. So I hid the m3 nuts in the blade and the handle. and added a cool circuit board look and a tanto blade…

Tanto Blade Balisong

Check out the latest remix with printed bushings for better consistency - Tanto Blade Balisong II Remix of Kz1nks nifty Samurai Balisong: Uses 12mm M3 hex head bolts and M3 nuts instead of printed pins Handle channels are wider so the…

Tanto Combat Knife

Med/big combat knife. Tanto blade, hollow handle. Back then I milled one out of steel. Here to test the size ;-)

Tanto Outdoor Knife

Med/big outdoor knife. Tanto blade. Back then I milled one out of steel. Here to print to test the size ;-)

Tanto Balisong, Tweaked for Trick Flips

Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side). Added a hole to put bolts in for weight…

Starfield Tanto sword

Gravity Knife V1 Tanto knife comb

this is the Tanto blade but it has comb teeth so you can be stylish and badass at the same time whip that comb out and fix your hair print on the flat side so the teeth don't break and use supports 100 infill so it can be strong Made on…

AeroTanto | Tanto Balisong Training Butterfly Knife

Training butterfly knife with japanese style tanto blade.

Stanton Chess Pieces - My School Fixed

Update: view the new complete set here: https://www.printables.com/model/1101116-full-classical-staunton-chess-set Hey, I'm Matthew Stevenson! This was a solution for one of my school teachers, who contacted me through the company My…

BABY TANTO

A cute little short knife.Shorter than regular Tanto(short knife).

Aikido tanto training knife

This is a model I remixed from Cults3D. Original link to model by @LetsPrintIt is here. Original model file: https://cults3d.com/en/3d-model/tool/tanto-practice-knife Creator's page: https://cults3d.com/en/users/letsprintit/3d-models I…

Samurai Mask Tanto ATMOS

Samurai Mask Tanto Inspirado en Ghost of tsushima

Stronto (StrongArm + Tanto)

I bought a piece of D2 tool steel when I was a teenager with the intent of making it into a knife one day. 10 or so years later, that day has come, and this is the design I chose. It's basically a gerber StrongArm with a Tanto style…

even more ultimate Tanto Blade Styled Combat Knife/Short Sword *Self Defense Model*

i made it better

#3 Tom stanton o-ring piston

Find the right size or adjust it in the .f3d file. 12.8 worked for me with the standard resin with an elegoo mars 4 default settings

Tanto Knife Sheath

Unless you happen to be into knife making, you're probably looking to customize this. Added fusion file in case anyone wants to experiment with making their own shapes. It prints without supports by printing on the back of the sheath. The…

llavero trafico café para tanto idiota

Esp: Nueva frase para el ya típico llavero del cartel de tráfico Eng: New phrase for the already typical traffic sign keychain

Aikido tanto - test print

This was my first attempt at printing 3D printing a tanto. I used Silk PLA and it turned out lovely. This particular model was unclear to me, and required a lot of sanding. I didn't use enough infill, so it was very light. Still looks…

Training tanto for Jiu-jitsu / karate

Print out of PETG, on the back (see eaxmple). I've used quality settings (gyroid filling, 20%, 2 perimeters), with supports for the handle, and it's just fine. Several versions are provided: _darkbruce: with my username embedded _keiko :…

K-Bar with Tanto point

Simple K-Bar model with a Tanto point, just another random model I made a few years ago when first learning how to use CAD

Kakashi Tanto - White Light Chakra Sabre

Kakashis' White Light Chakra Saber From Naruto Shippudden!! I have not personally printed this blade as of yet, but i will as soon as i have room on my wall lol. I designed it to be used for either a young Kakashi or Sakumo cosplay. They…

Tom Stanton Hook Challenge Remix

A remix of Tom's Hook Challenge contest winner with a wider opening to fit around wider bars.

Tanto Tacticool Training Tool Dummy Knife

Self explanatory. Dummy Tanto-ish training knife for martial arts or film. Print it in green for post production. Or use it for Cosplay. Just don't poke your eye out. Well its not really that pointy but for some that doesn't matter. Print…

Tanto Blade for gravity knife

I made this in fusion 360 for the gravity knife also on printables.

Vibrant Tanto from The Cycle: Frontier

This is the Vibrant Tanto from the video game The Cycle: Frontier. Enjoy!

Ceremonial Tanto from The Cycle: Frontier

This is the Ceremonial Tanto from The Cycle: Frontier video game. Enjoy!

Razor Blade Tanto Knife

This is a model of a knife. I have made the knife in two halves so that you can put razor blades in between the halves to make a cutting edge via glue or screws. I have made a .1 mm tolerance for the inaccuracy of printers. Please comment…

Piston Seal Mold, Tom Stanton Compressed Air Engine

Ich hatte immer Probleme beim erstellen der Dichtung da das zu gießende Silicon immer mit der Gießform sich zusammen Klebte. Egal wie viel Trennmittel ich benutzte es half nichts, also habe ich diese zwei Komponenten Form erstellt mit der…

GE ConstantOn 5mm Bulb Adapter

I have an older pre-lit artificial Christmas tree, made by Santa's Best Craft. The lights are a GE ConstantOn string. The light string uses a weird bulb - it's a 6mm bulb with a weird pinched base. I can't find the proper bulbs anywhere,…

Tactical tanto combat knife

A modelled tanto knife styled from the famous Leatherneck tanto, not exact dimensions but is good enough as a training knife, dummy knife or prop

Saya (scabbard) for Tanto (knife)

This is the friend model of the knife (tanto) I designed a few days ago The design has a 0.3mm margin, shich should be good for fitting without too much friction. The part between handle and blade has a conic shape on the blade, allowing…

tantos ts-kbd-em-ip66

tantos ts-kbd-em-ip66

Cylinderhead remix for Tom Stanton Engine

I only have an air hose and no screw/press fittings so i modified the cylinder head a little bit

Piston Seal Mold, Tom Stanton Compressed Air Engine

Ich hatte immer Probleme beim erstellen der Dichtung da das zu gießende Silicon immer mit der Gießform sich zusammen Klebte. Egal wie viel Trennmittel ich benutzte es half nichts, also habe ich diese zwei Komponenten Form erstellt mit der…

Tanto Tacticool Training Tool Dummy Knife

Self explanatory. Dummy Tanto-ish training knife for martial arts or film. Print it in green for post production. Or use it for Cosplay. Just don't poke your eye out. Well its not really that pointy but for some that doesn't matter. Print…

Stanton Chess Pieces - My School Fixed

Update: view the new complete set here: https://www.printables.com/model/1101116-full-classical-staunton-chess-set Hey, I'm Matthew Stevenson! This was a solution for one of my school teachers, who contacted me through the company My…

Lego Tanto Blade

This is a alterd model of the Lego Katana, meant to be assembled with a carboard tube from your recylcing can to resemble a Tanto blade. I used the tube from my empty roll of alluminium foil, but any size tube will work obviously. To…

Tanto Fan - print in place

Just started designing things, I wanted to play around with printed in place items. I printed it with a brim, it sticks a bit to the handle part maybe a raft would be a better option or supports.

Modern Tanto Knife

This is my Modern Tanto 9" prop knife with a modern, tactical-inspired design. It features a straight tanto-style blade profile paired with a minimalist handle pinned with a slotted pin for mechanical connection. The handle is shaped for…

tanto style knife

this is a tanto style blade knife. i spent 3 hours just designing the blade. this is one of my first 3d models so please don't judge too harshly . I used no supports and 30% infill.

Cosplay Tanto Dagger (no Handle just blade)

simple tanto blade for cosplay

Tanto Knife

No supports needed. Blade will likely need to be printed at an angle to fit the bed. Blade and handle must be glued together. It can be a snug fit for the blade and handle, so for a given printer or PLA, you may wish to scale down the…

per sempre ti amo tanto

Ideale per un regalo d amore.

Tanto Knife

This is a 3D Model for a Simple but clean Japanese hunting knife (Tanto knife).

Finger Ring Tanto

Regular japan short knife with a finger ring,you can spin it for fun.

Mini Tanto (palm length)

A cute mini tanto.Yep you can spin it!

Dummy 13 Croth holster and Tanto

Simple edit to add a croth holster similar to this art: https://www.artstation.com/artwork/aod6x0 . Added a Tanto edited from the katana because I didn't want a full sword dangling betwheen my character's legs.

Tanto Blade Balisong II

A remix of the remix. Uses printed bushings, 10mm M3 hex head bolts, and M3 nuts. The bushings improve consistency, ease of construction, and overall flipping feel. All STLs are oriented for printing. No supports are needed. It is highly…

Tanto Blade Knife Prop

I designed this knife to be cut from tool steel on a water jet and sharpened. It works great as a prop for acting etc.