Counting matching models…
My brother bought this tape machine used and it had a broken Gear C which seams to be a common problem, since there are people selling replacements on ebay. I tried my best to model a replica of the gear and we managed to fix the tape…
The head base was modeled referencing the original injection-molded part, which is a common point of failure. The cassette transport, branded "GEC," can be found in various 4-track recorders, including the Tascam Porta One/Porta Two,…
This is an easy-to-print SYNTRX (Erica Synths) or Tascam Model 12 Stand that is angled at 30 degrees. However, this stand will work for many other synths, mixers, etc . This model has been updated. The original was too large. This version…
no support needed, 10%infill. you need a ¼ inch screw
Sadly, I no longer have access to the board to test the fit--this model may be a bit too big, and require downscaling to fit.
A reasonably good reproduction of a Tascam 424 MkIII 4-track recorder potentiometer knob. 6mm D-shaft. Print upright as-is with tree supports under the overhang. No supports needed in the center, so you can manually remove those.…
Stand sets 30 degrees angle for your portastudio that makes usage of it a lot easier(for me). Just print model as two copies with any plastic(PLA/PETG/ABS/ASA), attach rubber any feets to bottom of stands and enjoy. No need for support.
A replacement for the often lost/broken Tascam 424 MK3 tape cassette cover. I was able to recreate it by carefully inspecting an ebay image of one and a bit of trial and error. Note that to install this you do need to remove the entire…
Custom Rugged Case for TASCAM FR-AV2: The Ultimate Field-Ready Fortress Tired of the TASCAM FR-AV2 bouncing around in generic bags or risking damage on rugged shoots? Introducing the custom-modded Rugged Box Parametric Case – a…
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
Hey, I made it for myself, that's why it's a hack-job-assembly-glueing-or-soldering-requiring monster. ;) The completed model stl is for reference only, don't print that. Take the all-parts file, divide it into models in your slicer and…
Printed with PETG default settings in Orca Slicer
Replacement for TEAC Tascam DR-07 Microphone Cage. Print with support everywhere. You may consider to use Fuzzy Skin in PrusaSlicer or polish the print with a steel brush for a more matte look.
A stand for a Tascam DR100 field recorder on it's side. It has enough height for Micro USB to be plugged in while in use. Maybe a little too chunky for some people, but I wanted it to be durable. This may fit other field recorders or…
Modified geodave's Tascam DR-100 shock mount base to use 1/4"-20 thread, so it could be mounted on a tripod.
For the recording gear: Tascam FR-AV2 (I debated for a long time vs the Zoom F3) Sennheiser MKE-600 shotgun mic Clippy XLR EM272Z1 Matched Setero Microphone Pair Rycote Windjammer fur wind blockers - 2X For the mount: SmallRig BSM2352…
This is a design primitive for a windscreen for the built-in mics of a Tascam DR-100 MkIII field recorder. I never got around to designing the full cage to support the windscreen before I upgraded to a different recorder, but that should…
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
Modified geodave's Tascam DR-100 shock mount base to use 1/4"-20 thread, so it could be mounted on a tripod.
6pcs. M3x40 screw or 3mm rod required. Model remixed from Tool box parametric by Yanev News 2026/05/02 BOX_TOP STL+gcode fixed Print instructions 0.3mm DRAFT settings: Resolution 0,3 mm Infill 5% Support not required PLA filament
Case for the Tascam DR-10L Pro with some space in the top for the mic and accessoires. PETG works great :) No supports for the top part needed You need 3 M3 25mm screws Case was made with Extruben's case generator on makerworld.
6pcs. M3x40 screw or 3mm rod required. Model remixed from Tool box parametric by Yanev News 2026/05/02 BOX_TOP STL+gcode fixed Print instructions 0.3mm DRAFT settings: Resolution 0,3 mm Infill 5% Support not required PLA filament
This is a cover for Tascam DM-24 DM-3200 expansion port holes. Useful if you remove expansion cards, no longer have the covers, and don't want gaping holes in the back of the mixer. Print Settings Printer Brand: Creality Printer: Ender 5…
Tascam DR60d mkii Spare part - Clip 23.01.2020 Not finished I got so issues with the size off the holes. But i drilled a hole with 3mm it works, but not perfect. i will update it soon. My Grip Clip broke off and the cosntruction fall…
As the proud owner of a new to me Tascam Portacapture X8, I really wanted a case for it. But for some wild reason, there are very few dedicated examples on the market that protect this rather fragile piece of gear. I quite liked how the…
just a printable version of the Tascam rack mount. DISCLAIMER : this is not a replacement for the original rack mount kit. I did not test it for a long time, I do not known how resistant it is and will not endorse any responsibility for…
This model is meant to attach to tripod legs that are 30mm in size. The Tascam DR40-X should slide in. The XLR/TRS inserts are still able to be used. Printed with PLA at 15% infill using supports. If you found this model useful, please…
