21 models
Protect Your Pavo 20 Pro Battery! (Fits 650mAh Tattu 3S 75C) Tired of worrying about your Pavo 20 Pro battery? This 3D-printed battery saver is the solution! It's specifically made for the Pavo 20 Pro and fits larger 650mAh Tattu 3S 75C…
A TPU protector for the lipo. Print instructions After I designed a lipo protector für my mini beetle, I made one for my main kwad, too. This one holds a 1550mah 4s Lipo from Tattu, and fits under my transtec laser hd drone with air unit.
Super easy quick print. Rounded side is the one you insert a battery from. No supports for either version. The ultra light is still super sturdy. Go for that one first. You can clip off the two existing battery clips if you want to…
Since I always forget at which state (loaded, empty, storage) my TATTU LiPos are, I created this little box. Therefore it fits LiPos with an groundplate of 19mm x 9mm. Its designed to fit 6 batteries (18 in total) while using my planned…
Printed with default supports on X1C in PETG. It's not a hard model to make, but it takes a few iterations to get the tolerances right. You will have to cut the existing mounts, but you'd need to anyway if you want to mount anything other…
Created in Fusion 360. Protector for my little transtec beetle with DJI Air unit. Print instructions Needed a protector for FPV landings - cause the batteries get damaged over time, so I designed this in Fusion 360 to protect the lipo at…
LiPo protection for the Tattu 4S 850 mAh or similar battery Print Settings Printer: Renkforce RF100 Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 100% Filament: Renkforce TPU, TPE black Category: R/C Vehicles
LiPo 6S Protection for Tattu R-Line 6S 1550mAh
This is a TPU guard for a 6S Tattu 1400mAH LiPo battery, weighs about 12.5 grams, and it may* help protect from sticks or other sharp objects poking a nice hole in one or more of your cells during your frequent crashes! The dimensions are…
Remixed to fit 6S and a shorter version for the other side with clipped tab to clear wiring. TPU- 230C, 70C bed
You need to print Bassline_battery_holders_14x18.stl Bassline_battery_holders_14x18 - version for tattu r-line 550mAh and GNE 720mAh HV Bassline_battery_holders_2x1s - version for 2 battieries (you need dummy connector)…
I made this mount to prevent the LiPo from slipping out the front or the back when crashing or at extreme maneuvers. It also protects the LiPo from hits at all sides. It fits perfect for 1300 and 1550mAh Tattu-LiPos. Others may work too,…
Specification real model: Length: 58 mm. Width: 31 mm. Height: 16 mm. Weight: 59 g. Voltage: 11.1V (3S1P) Capacity: 650mAh Operating discharge current: 48.75A (75C) Power wires: 16AWG Connector: XT30 Balancing connector: JST-XH
So I needed a way to carry my tinywhoop, and I really liked the U.S. General gridfinity setup that Uncle Jessy showed off. This is just one of the bins that I made for my system.
This simple model of holder are use on Tattu 450mah (Dimension : 63*17,5*7,1 mm) who give and additionnal minute to fly compare to lavaII 320mah (AIR65 CHAMP). Printed with tpu and less than a gram (.39g)
After a recent crash where I almost lost my drone because I lost all power I decided to create a strap that actually works to keep the plug secure. There are two versions of the strap. I tested it with the Lava 2 580mah and Tattu R-line…
Repair your Tattu Smart Battery Plus 16000mAh 6s with our custom-designed 3D printable replacement button. Available in three thicknesses to accommodate different material types. Key Features: Perfect Fit: Precision-designed to match the…
Following advice on transporting LiPo batteries, I have kept the original boxes they arrived in, but with the protective cover installed on the balance port, the batteries do not fit well in the original insert. I do not want the…
After a recent crash where I almost lost my drone because I lost all power I decided to create a strap that actually works to keep the plug secure. There are two versions of the strap. I tested it with the Lava 2 580mah and Tattu R-line…
This simple model of holder are use on Tattu 450mah (Dimension : 63*17,5*7,1 mm) who give and additionnal minute to fly compare to lavaII 320mah (AIR65 CHAMP). Printed with tpu and less than a gram (.39g)
