210 models
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Alternative to starter GRAVITRAX JUNIOR
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I modified this bowling pin as I needed some type of mod to help block the ball from going off the left side ramp (lebowski) and getting stuck. Made some size adjustments and added a base for easier mounting. I'll also include my versions…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Einfacher Test zur Anpassung des Wischvolumens für saubere Farbwechsel ohne verwischen. Die Druckdateien wurden mit den Standardeinstellungen von 70mm³ beim Entladen und 70mm³ beim Laden der entsprechenden Filamente gesliced.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Damit die komplette frische Luft durch die Grafikkarten gedrückt wird habe ich diesen Outlet Blocker kreiert
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. The v2 version uses a thicker marking to be more printable.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
Behold the legendary Nightblood! A sword of exceptional power and a thirst for destroying evil. I designed Nightblood as accurately as possible based on the cannon works and artwork from the Stormlight Archive series / Warbreaker book.…
Alternative zum herkömmlichen Start. Hier können die kleinen einfach die Kugeln rein werfen und schon gehts los. Super schnell hintereinander. Damit ist richtig was los auf der Bahn. (am Besten ohne Hammer und ohne Wippe ;-)) Kann auch…
Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…
Fluval Compatible Light Riser – Rimless Aquarium Mount for Fluval Plant LED Lift your Fluval Plant LED light off the water and clear of the tank with this neat light riser, designed for rimless aquariums with 10 mm glass . It slides…
A reupload from MakerWorld of this model by Schichtkunst , which itself is a variation of Tennis ball rockers for Wahoo Kickr Core by adze I had success printing on my MK3S with 0.3mm layer height, 0.6 mm nozzle in PLA. I used 3…
Blender file of complete chassis ( no hardware or electrics) that Ive used for a couple of scale bodies. Thought I'd share in case others find it useful . Original files and design credit >> https://www.thingiverse.com/thing:4892947…
its a prop for mm2 cosplays or for display or just for your average Roblox fan (it is recommended to print with , and it is a really sharp object so be carful when removing supports or when being held.)
It is intended for sticking on the window or for autumn decoration.
This is Nightblood, the awakened sword from Brandon Sanderson's Cosmere series, ready to destroy evil! This version is fully 53" long from pommel to tip! -------------- Warning: the tolerance between the blade and the scabbard is only a…
A tool to check if your printer is capable to print metric thread. This is a remix of https://www.printables.com/model/738513-metric-thread-testblock Thanks to the original uploader.
“Hello! Would you like to destroy some evil today?” - Nightblood in Words of Radiance by Brandon Sanderson. Roughly to scale (Nightblood specifically varies quite a bit according to the best guesses of measurement), this version of…
Introducing the TwistBloom Pen This pen features a flower-shaped design with a threaded stem and base, allowing it to effortlessly twist and lock itself into its accompanying vase. With just a gentle twist and the force of gravity, the…
Square hood for fuji 23mm f2. It's designed to fit snugly on the original hood mount.
Story: In the quiet corners of a star-scattered night, Nightblink stirs—an elusive, wide-eyed guardian of dreams. Said to be born from the last blink of twilight before true darkness, this dragonling is known to curl up beside moonlit…
XLR Durst Cap / Portblocker I Printed it in Extrudr Semisoft TPU Repost original: XLR cap by vitalyu - Thingiverse
For anyone who's played the legend of zelda: Tears of the Kingdom, you know the utility of the Brightbloom seed, the light in the dark. When I looked around to print one, I couldn't believe it! Nobody had made a brightbloom seed lamp ??…
A model inspired by the sword Nightblood from the epic fantasy series The Stormlight Archive by Brandon Sanderson. This is a Full model of the sword. There is a more detailed guide on how we actually printed and finished our build on…
Part cooling fan for biqu h2 v2s that have bigger air outlets. Use 2x heat set inserts to mount the fan.
This is a customizable rack for PB Swiss Tools BitBlock bit holders (PB C6 970) . You can customize the overall height and the number of BitBlocks. It's ideal for use in a foam board but can be used stand-alone as well. The BitBlocks hold…
Castblade Fishing Hand Line Wheel Introducing the Castblade, a meticulously designed fishing hand line wheel perfect for your next fishing adventure. This 3D printable wheel boasts dimensions of 177mm x 177mm x 65mm, making it a robust…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Canon EF 50mm f1,8 II. Gewinde M52 x 0,75. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem…
Ich finde die Kugelschreiber und Füller von “Mont Blanc” sehr schöne und teuer. Für mein Whiteboard habe ich mir einen Magnet Schild erstellt.
Adapter to put a BOSCH A 332 H flatblade wiper on my OPEL ASTRA J OPC. Prusament PC Carbon (fits best in color) / PC / PETG / ASA needs only a small support structure under the connection part to the arm.
Originally I made both versions for a colleague. The long version was used for a ballpoint pen with fixed refill. The shorter version was for a ballpoint pen with retractable refill.
This is a Bitblock holder for PAFEN / Kistenberg / Botle / Valle Verde Toolboards (Wallboards) which can be equiped with 4 of my own Bitblocks or PBSwissTools Bitblocks As an option i designed my own easy to print bitblock with no support…
This is a of The Logitech C920 Lightblock from https://www.printables.com/model/128843-logitech-c920-li As well https://www.printables.com/model/185917-logitech-c920-webcam-privacy-cover
This is an add-on to my game of Tic Tac Rocket . Now you can play tic-tac-toe in 3D: put your stars (crosses) and planets (circles) on top of the opponent's pieces, securely occupy cells with missiles, neutralize other people's moves. You…
How to read the time : The current hour points to the current minute. This is a rework of the Improved Wandering Hour Clock by David Kingsman . The original model was made for IKEA BONDIS Clock ; this clock being hard to find, I modified…
Using a good rollerball pen is a great experience - but can be costly. I love writing with the inks from Montblanc but never wanted to spend the money on their pens. This model allows to use the Le Grand refills in a self printed sleeve.
The Nightblood_Segmented_Template.stl has the support rods in place so you can adjust length and diameter before recutting with the boolean tool if you want different sized support rods or pins. .25" threaded rods are commonly available…
This is a custom zero‑tolerance insert designed to insert into the original throat plate of the Evolution R255TBL / R255TBL+ / R255TBLX /R255TBLX+ table saw. The stock insert has a wide opening that causes tear‑out, chip‑out, and small…
The Ghostbloods' symbol from Brandon Sanderson's Cosmere representing a secretive organization.
TPU stabilizer silentblock for Nissan 200sx S13. 100% infill 6 perimeters wall
Because of the geography and the wind from the Baltic See the driver's of BR86 steam locomotives on the island of Usedom (D) often encountered poor visibility due to smoke from the chimney. To tackle this, the Deutsche Reichsbahn (German…
Made a mold to make your own silicone socks for the MP Select Mini V2 hotend like the E3D ones but to the proper measurements, this does not fit E3D hotends or colones, only the MPSM V2 stock hotend, the block measurements are…
Folgende Dateien stehen für FM268M-DG3+ zur Verfügung: V1_ATX_Slotblende_FM2_ASRock : Die Blende muss nachgearbeitet werden. Der Einbaurahmen ist etwas zu groß. Den hervorstehenden Rahmen mit dem Cutter abkratzen hilft.…
Gridfinity Prusa MK4 Heatblock/Wrench Holder - holds 1 assembled Prusa MK4 heat block with nozzle, thermistor and heater along with the Prusa nozzle wrenches and 3 of the Allen wrenches included with the Prusa MK4. Bin size is 1x1x6…
Enables the nozzle to be changed without removing the part cooling duct and fan. Print instructions This is a clamp mechanism that fits round the X carriage and bearing rods of a Prusa i3 MK3S to hold the heatblock in position whilst the…
PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand
Gelochte Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera oder 50mm Leica Objektive mit M43 x 0,5 mm. Das Gewinde hat die Abmessung M43 x 0,5 mm. Drei verschiedene…
=================PLEASE LIKE AND SHARE============= Designed for the contest - it is just a simple novelty box in shape of famous E3D V6 Heatblock and Nozzle combo. The nozzle used for locking and unlocking the lid by turning 90º. See…
I got tired of paying more that $50 everytime this part broke (usually about once a year!) So I created this part to quickly and cheaply print one anytime it is needed! Found PETG is better that PLA (not as brittle.) Printed upright, no…
Theres two options for the magazine and the bottom. One being a normal/blank one so you could modify it to your liking as well. Assembly is pretty easy. Insert the Follower into the Mag from the bottom. Push the spring in and then close…
Drilling a hole in the "first" Stock nozzle will prevent from falling out. Use a 2.5mm drill and go (if possible) 6mm deep. If you go through it doesnt matter. I use 2.5x5mm Spring type straight pins to fasten the nozzle in the Block. The…
Printed with .2 layer height and hilbertcurve top layer pattern, to give the surface a nice texture. The fit was perfect for me with .2mm tolarence. You can adjust it in the fusion 360 file with an parameter. This parameter adjusts the…
TPU silentblock for stabilizer bars. 100% infill 6 perimeters walls
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Yashica ML 50mm f2. Gewinde M52 x 0,75. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem…
Wandhalterung für BambuLab Druckplatten. Bietet Platz für bis zu 4 Druckplatten von 0,8mm bis 1,2mm Stärke. PEI/PEO/ Bambu-Platten mit Sticker usw. Kann mit einer 3mm Schraube an der Wand befestigt werden. verschiedene Versionen zum…
This is Linkeys dad new to the ragdoll family new to having a job and he does not need support
Using the additional 0.1 mm offset for the support channels allows for easier assembly with PETG filament. The offset has been baked into the channel cuts. The 3.4 x 12.8 mm (1/8" x 1/2") mild steel bars can be found at your local…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Bonjour à tous, Voici un moule pour fabriquer des silence-block pour ventillateur NOCTUA. Je les ai conçu pour mes Noctua Redux de 140 mm mais je pense qu'ils doivent être compatible avec de nombreux autre de la marque. Il est composé de…
Spare part for repair of several Thorens Models. I needed it as spare for the broken original part. Fits Thorens TD280MkIV, TP90, TP50, TP21, TP16MkIII, Genuine Spare Part No. 6886024. You just need to cut M3 threads into the hole, or you…
Frontblitzer Box für Autoscheibe
Ersatz für die Nikon Gegenlichtblende HN-3 für die Objektive 35/1,4; 35/2; 35/2,8; 55/3,5Mic; 43-86/3,5; 35-80/4,5-5,6AFD und 35/2AFD mit M 52 x 0,75 Gewinde. Es empfiehlt sich den Teil mit dem Gewinde mit der niedrigst möglichen…
Made this edit in fusion 360 to move the ducts 10mm lower to allow for use with volcano style heatblock. Included step file for customization Category: 3D Printer Parts
Vhorlath Realms – Season II: Shadowed Empires The Hellborn Greatblade is a powerful horned demon figure carrying a massive two-handed blade, shaped for dark fantasy settings where brute strength, infernal presence, and visual impact…
Among the fiercest leaders of the Ashmaw Clans , the Rustblade Chief stands as a living symbol of dominance, endurance and hard-won authority. Wrapped in scavenged armor, marked by brutal trophies and carrying a heavy scrap-forged…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Voigtländer Ultron 40mm f2 für Nikon. Gewinde M52 x 0,75 in zwei Versionen. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt…
Chłodzenie dla drukarki Fan 4 Max Pro Anycubic z blokem V5
MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet Summary Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)! Description These…
I thought pyr0ball's mold design was simple and worked great as far as overall fit/finish and ease of use. However the socks it produced were about 1mm too long with the nozzle tightened down against the heat block. So I remixed it to…
This is my first iteration of Nightblood's sheath. I've gone through numerous versions. This is the first that I'm happy enough with to hang on the wall. However, I have plans on making changes, adding more detail. That said, I have had a…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera. Gewinde M43 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
I wanted to build a folgers can for my pinball machine so decided to give it a shot and here are the results. I originally set off to install on the lower left side below the ball return to try and limit the ball bouncing over that ramp…
Leider war ich mit den Originalminen von Montblanc nicht so zufrieden. Mit diesem einfachen Adapter ist es möglich die Gel-Minen von Pentel (KFR10 für K160/K230) zu benutzten. Wackelt nicht und die Mine sitzt stramm im Rollerball ;-) Ich…
The Ghostbloods' symbol from Brandon Sanderson's Cosmere representing a secretive organization.
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 10,5cm f2,5 Nikkor für die Nikon Meßsucherkamera. Gewinde M52 x 0,75 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden.…
This Ice Knight Frostblade Champion stands clad in layered frozen armour, gripping a jagged frost-infused blade that looks carved from glacial ice. The angular plate design, sharp pauldrons, and wind-swept cape create a commanding…
Gridfinity base for the PB Swiss bitblock holder PB 990.Leer
für unser lokales DRK haben wir einen Halter entwickelt, welcher Frontblitzer im Kühlergrill fixiert. Wichtig Hiebei ist ein sicherer halt und eine einfache Montage ohne Fachkentnisse. Verwendetes Material Prusament PETG mit 30% infill.…
Gedruckt auf mk3s+, PETG, 0,2mm quality im Prusa Slicer 2.5.0
Gegenlichtblende für das Nikkor W-Nikkor 1:1,8 f=3.5 cm Weitwinkelobjektiv für die Meßsucherkamera. Da ich dieses Objektiv - leider - nicht selbst besitze wurde das Modell mit geduldiger Hilfe anderer Personen, welche mir die Abmessungen…
Gegenlichtblende für das Leica Summicron 50mm f2 Objektiv mit M39 x 0,5 mm Gewinde. Ausführung mit Löchern oder ohne. Die konische Gegenlichtblende kann ohne Stützmaterial gedruckt werden, die zylindrischen mit Löchern benötigt…
Bought my Jetblack Volt trainer second hand and the thruaxle adapter was missing. Measured the distances manually and added tolerances so that it worked on my printer (Snapmaker J1S), the measurements seem to be: Inner diameter: 12mm…
Gegenlichtblende für die Hasselblad SWC mit M 67 x 0,75 mm Gewinde. Eine Version mit M 86 x 1 mm Gewinde für Filter oder Objektivdeckel und eine Version ohne M 86 x 1 mm Gewinde. Ebenso, auf Anregung, Versionen mit Löchern bzw Schlitzen…
Gegenlichtblende für das Canon 50mm f1,8 LTM Objektiv mit M40 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Canon 50mm f1,8 LTM lens…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Some test blocks to show how to use “fuzzy skin” settings to add texture to a part. Previously I created a small set of test blocks intend to to show a significant amount of “fuzzy skin” on the surface of a 3D print. As I noted then, the…
Ersatz für die Nikon Gegenlichtblende HN-24, für die Objektive 100-300S, AF70-210, AF75-300 und E70-210 mit M 62 x 0,75 Gewinde. Es empfiehlt sich den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe zu drucken. …………..…
DIY Heatblock design for Volcano
TotBlocks are a series of building blocks which can be used to construct the crystal structures of micas, pyroxenes, amphiboles, and other clay minerals. Source code, documentation, and support can be found here:…
This is a keychain holder for a standard magnifying glass to fit on a simple keychain, it was made with editable parameters in fusion 360 so you can change it to any size that you need! Printing settings: 2 Wall/parmiters, 10% infill This…
Printablok: Extended Shortblok collection This is a remix or more an extended collection of the Short Blok(Part Number 108) from the Printabloks Base set by the 3DPrintingProfessor. I have extended these to match up with options available…
Cache pour tige filetée de silentbloc PRINTER BOX
Dual 5015 fan duct for sv04 printer with volcano hotend. Really increases the cooling performance with out sacrificing on the idex extruder clearance/ copy & mirror print area. Should clear the volcano heat block, but you might want to…
le top case fait un bruit de claquement sur mauvaise route j'ai créé des Silentbloc et depuis plus de bruit ce à l'avant de la fixation il faut l'ai coller et à l'arrière juste à clipper doit pouvoir ce monter pour d'autre model de deux…
![Magnifying Glass keychain holder [editble]](https://media.printables.com/media/prints/393100/images/3283807_5cda603d-7b67-45d3-9f33-7f889d08baa3/20230208_151851.jpg)
