Counting matching models…
This file is outdated! Version 2 can be found here: https://www.printables.com/model/1329651-ventilation-port-light-trap-v2 A printable Ventilation-Insert for Plant Tents or Grow Boxes. This Insert with a diameter of 150 mm (~6") traps…
[CATMAN TV] an ultralight (20gram) cellphone hanger for your tent! simply hang this from your tent ceiling and gently hug your phone in. the two legs of paracord must be further away diagonally then the central axis in order for the…
Use 2 mounting plates or one mounting plate and a holder or 2 half holders to securely mount 120mm computer fans in soft materials (like a greenhouse tent) without risking to rip the tent apart. I mostly use the flat mounting plate but if…
Organize your grow setup at home and get rid of all the cables flying around! Make sure to measure the diameter of your tent poles first. Most manufacturers use 16 or 22mm poles from my experience. Have fun!
I remixed this to fit 22mm grow tent poles which is commonly used in AC Infinity tents (among others). I printed this in PETG and it uses roughly 5.3grams of filament .20 Walls: 3 15% Gyroid
Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.
Fast Knot Rope Buckles - Adjustable Wind Rope Clips for Tents
OD: 3.75" The Hex Guard Window Exhaust Adapter is a highly versatile and practical accessory designed to address your specific ventilation needs. This innovative adapter empowers you to seamlessly connect your ducting to a window,…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…
Organize your grow setup at home and get rid of all the cables flying around! The XL sized clips are for anyone that needs to fit more that 3 cables. Make sure to measure the diameter of your tent poles first. Most manufacturers use 16 or…
I found it impossible to set up good Airbus style CLB + FLX/MCT + TOGA detents with the stock STECS detent pieces so I designed this custom piece that adds three identical and equally spaced detents. Print with 0.2mm layer height and 100%…
Kasten mit Inhalt (Bier)-kasten Flasche Tetra-Pack Maßstab: 1:14,5
OD: 5.75" The Hex Guard Window Exhaust Adapter is a highly versatile and practical accessory designed to address your specific ventilation needs. This innovative adapter empowers you to seamlessly connect your ducting to a window,…
This mod mimics the A320 detents. I included the .step files in case you want to rearrange the detents or improve it. If the parts aren't fitting in the base part, sand it down, lower the flow rate or scale the base part by 0.5% in its…
Wer hat sich beim Zelten noch nie an einem Zelthering oder Erdnagel gestoßen? Meist tut es unangenehm weh! Die oft gesehene Lösung mit aufgeschnittenen PET-Flaschen finde ich nicht sehr schön; und außerdem: wozu hat man einen 3D-Drucker?…
Print and use two small screws to act as post for controller to rest on. Slide 3 magnets into slots. Use 3 other magnets on inside of tent. Print time around 2h10m pteg or pla 10-15% infill 0.3mm layer height Magnets used:…
Axial fans are loud and power hungry (15W for 100m^3/hr vs 1W with a noctua fan), recommended filters are expensive. This is an (optionally) two part build to mount exhaust/inlet fans to your grow tent, and to put a sheet of carbon filter…
I needed a 4in duct fitting after installing my AC Infinity AC unit as there were no more pre installed holes. This worked great. I used 5mm brass inserts in the plate. printed with the shorter length down with supports. The nut plate…
Why I designed this: Two years ago we bought a new awning to our caravan. This one is hold by air tubes instead of the typical steel tubes. Anyway leveling the tent on a not flat surface is to be performed using spacers under the tents…
See Original. I recommend using the step file for printing
These tents were designed to allow for cables to pass under the keyboard and turn typing more comfortable. See original work from Keyboards - Bastard Keyboards - Split ergonomic keyboards (bastardkb.com) .
the complete sd card contents with nothing removed. the firmware that comes on the board with the kossel is junk so i included a preconfigured version of marlin 1.19 (for stock board) and 2.0 (for skr v1.3) for the flsun kossel with large…
I designed and build a desktop cockpit for the Aerosoft Airbus in FSX and had the Hotas X as my stick and throttle. It has a detent in the middle but it is nowhere near where the throttle needs to be for the Climb or Flex setting that are…
I could not find any good fingerlifts for the V1 version of the vpc throttle so I decided to design my own. It includes a gated idle cut-off which requires the fingerlifts to be lifted to get it from idle to cut-off and a afterburner…
レトルトパックの中身を綺麗に絞り出します。 用途に合わせて３種類のモデルがあります。 Squeeze out the contents of the shield pouch neatly. There are 3 types of models according to the application.
Fusion 360 model for Piantor Keyboard. https://github.com/beekeeb/piantor I haven't received my kit yet from Beekeeb. I printed one from the GitHub repo, and I wanted to make one with a thicker base & tenting options. I haven't tried…
Model of the ruins, tents and a tree from the Knee from The Owl House, S01E12 Adventure In The Elements . Print Instructions Everything was printed at 0.2mm layer height. Part Dimensions Supports ruin wall 151mm x 16mm x 82mm yes, organic…
Flap detents for Condor 3 soaring simulator for the VKB stecs throttle
The universal hook was once designed to my DOMETIC tent but can also be used as a universal hook. The top circle of the hook has a tighter gap to avoid falling of where it is clipped to. Can be scaled up/down as you prefer. Have a look…
This model allows you to hang your headlamp as a lantern for your tent! It features a 4 part assembly, completely foldable to allow for the most compact and durable package to throw in your backpack. Fits all standard headlamp sizes. How…
I was tired of my janky tents I just velcro'd on to the bottom of my hergodox, so I made this. I chose a tent angle of 17-degrees b/c its what i had before, but using the Onhape doc, you can plug in any angle you like. I made this with…
These are compression end caps for tents or other rolled things with a diameter of about 20 cm (7.9 inch). The caps are put on both sides of the tent roll and fixed with 25 mm (1 inch) wide straps. I use them for safe transport of a tent…
Small test print. Same size as hex P on Protopasta retail boxes found at Microcenter. Use to test 1st layer & extents.
I bought a Paria Arches 2p trekking pole tent for my 2022 Philmont trip, but my tent partner somehow lost one of the hooks, so I modeled one and printed it. The thickness is double the actual part for strength, and I printed it at 100%…
“The table of contents approximately contains the number of atoms the table of contents contains.” (Someone, somewhere, 2022) Note: print with 100 % infill for this statement to be somewhat true also Note: use pla for the same reason aswell
Two simple parts to print. Print the one with bosses orientated as shown in the photo. You will need a 8-32 x 2" SHCS, an 8-32 thin, self-locking nut, a pair of 5mm diameter balls preferably steel or stainless steel, a pair of .187" OD x…
Haken für 4,5mm Holzschrauben, um diese als Schraubheringe zu verwenden. Printer: Ulrimaker S3E Filament: Extrudr glowEx PETG Infill: 100%
Made new drawer handles that can show the contents label. The handle has two holes for 3mm threaded inserts. The photos show the green handles (Bambu PLA-CF). The drawers and cabinet are going to be painted black in the near future.
Designed this tip as a replacement for the aluminum tip in the tent poles which anchors the internal shock cord in the tent pole assemblies. The Marmot tips are threaded, but I didn't find that necessary to duplicate since A) I didn't…
While building my simpit I found I wanted to be able to easily integrate the TWCS throttle I had on hand. I used the original model as a base and removed as much as I could. What was left is a simple box that can easily be fit into a…
This is model made by me, but inspired with some mod, that I saw on reddit photos, but never found a 3D model for. It uses an existing mounting points in Thrustmaster TWCS. I've switch places for two screws from base plate to fit the…
A Logo/Keychain for the UK brand Tentsile. Created completely from scratch on TinkerCAD Please like, comment, leave a make, or follow. Happy printing! If you like this, check out some of my other models:…
Flaps detent system for Virpil CDT VMAX (haven't tested with Prime). You will need need: 1 Hex Socket Spring Ball Plunger M5x12mm (Or M5x10) 2 Screws M3x6mm countersunk. Tapping kit (M3 and M5) - optional Assembly: - Remove Rubber handle…
Quick and easy signs to print with just one color swap! These signs are more durable than paper signs and work well in humid environments, like MRRF! I customized signs for my booth with this folded sign design that I initially designed…
a spare corner palstic piece for pavilion tents. ppl who needs one will recognise the part. it fits perfectly. i printed it in ABS for durability outside. i used supports (tree).
Design Concept The design of this container is focused on functionality, featuring a viewing slot that allows users to quickly ascertain the remaining contents without needing to open it. ## Purpose Ideal for a variety of small items,…
Axial fans are loud and power hungry (15W for 100m^3/hr vs 1W with a noctua fan), recommended filters are expensive. This is an (optionally) two part build to mount exhaust/inlet fans to your grow tent, and to put a sheet of carbon filter…
This model allows you to hang your headlamp as a lantern for your tent! It features a 4 part assembly, completely foldable to allow for the most compact and durable package to throw in your backpack. Fits all standard headlamp sizes. How…
Designed vertical split keyboard tents! Setup: 2x magnets - https://www.amazon.com/dp/B0DG4RLD4T?ref=ppx_yo2ov_dt_b_fed_asin_title 2x Printed parts (recommended in PETG) 4x M5 - 25mm nuts and bolts 2x Printed clamps -…
Honeycomb Storage Wall Hot Wheels Holder with wheel detents.
I ran into the problem that the Playmobil tents wouldn't stay put. So I came up with the idea of making an interior with beds for a sturdy base. The standard version can be adjusted with scissors to fit into the smaller tent.
Most DIY encoders feel cheap and flimsy. This concept model was designed from the ground up to provide a heavy, premium tactile detent using opposing magnetic forces rather than grinding mechanical parts. By utilizing a standard 608…
This is a dog bone shaped line tensioner to secure tents to stakes.
Update 01/01/2024: I beefed up the area around the hooks on the back. V23 with more bracing for the hooks on the back. You want to use ABS or some other high temp filament. Dishwashers get about 145F hot. V23 sides are 2.5mm, bottom 5mm…
A less dramatic tent for the Charybdis Mini with trackball (3x6). Mirror the left tent in the x axis when printing. I used 15 infill.
This updated version has better tolerances and since is solid it produces a better sound, also it fits better.
