Search results: termi

Sort order

Counting matching models…

P
Printablesmichalgerhat

Magnetic PFTE coupler dock/terminator

I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…

Downloads
847
Likes
527
Rating
4.76
P
PrintablesPGLLGC

Rlaarlo Omni Terminator ESC Mount

Created this simple to print and use ESC Mount for the Rlaarlo Omni Terminator Mini 1/10 truck. Allows use of both double sided tape and zip ties - mounting to a rigid structure that uses stock screws.

Downloads
405
Likes
35
Rating
5
P
PrintablesREMLURELMI

9V Battery Terminal Protector

Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No

Downloads
398
Likes
106
Rating
5
P
PrintablesNotrial

Meanwell LRS 75 Simple Terminal Cover

Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…

Downloads
380
Likes
45
Rating
5
P
PrintablesKazmar

Terminal Block

Simple terminal block. You can add as many terminals as you like by copying and merging “Terminal_mono” (or by using patterns). Requires (Parts required per one terminal.) 1x : M3 Screws 7mm 1x : M3 Nut 2x : M3 Washer This model is for…

Downloads
270
Likes
56
Rating
5

Terminator Hitch Hook Overlay. Nakładka na hak Terminator Hitch

Nakładka na hak o kuli średnicy 50 mm. Nakładka jest blokowana zapięciem z gwintem dokręcanym kluczem w zestawie. Gdyby wygięcie haka było zbyt ostre, należy skrócić klucz, by móc dokręcić zacisk. Hook cover with a ball diameter of 50 mm.…

Downloads
265
Likes
21
Rating
5
P
PrintablesDingo_aus

12V Battery Terminal Cover - POSITIVE

This print is designed to press fit onto a 12V car battery terminal to cover the exposed metal parts of the post to prevent accidental short circuits. This model allows for protection of N70T type posts which are often found on Deep Cycle…

Downloads
239
Likes
18
Rating
0
P

Metabo TS 254 - Extensible leg terminator

This file contains the threaded insert that is used to adjust the extender leg terminator. It is necessary to insert an M6 screw inside to ensure the sturdiness

Downloads
37
Likes
4
Rating
5
P
PrintablesStillpointx

Quick Wire / cable connector terminal block spring connector wire holder (multiple types / sizes with label option)

Quick Wire / cable Connector Terminal Block Spring Connector wire holder (Multiple types) with space for small labels. I needed a holder to hold multiple types of these different type of wire connectors. The fit is tight because I don't…

Downloads
29
Likes
4
Rating
0
P
PrintablesNicholas Tupper

KDFW Terminal Area (Scaled to Testing Supplement)

A 3d Representation of the KDFW Terminal Area for use as a Teaching Aid for Flight Instructors! Scaled laterally to match the scale found in the FAA Private Pilot Testing Supplement (IMPORTANT: NOT SCALED TO MATCH A STANDARD SECTIONAL…

Downloads
28
Likes
2
Rating
0
P
PrintablesOldCoder

Astron SS-50M Power Supply Output Terminals

Designed plastic parts to replace the cheesy terminal posts on my Astron SS-50M power supply. One of the setscrews (or its threaded socket) is stripped. So I used OpenCAD to design plastic parts for a traditional 3/16” bolt lug nut…

Downloads
26
Likes
2
Rating
0
P
PrintablesToast123

The Ice Terminator aka The Electric Ice Scraper

Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…

Downloads
26
Likes
7
Rating
1
P
Printableskrupkaj

Krytka terminálu zdroje MeanWell RD

Kryt terminálu s živým napětím pro zdroje MeanWell řady RD s terminálem se šesti pozicemi.

Downloads
21
Likes
1
Rating
0
P
PrintablesM

Giesse Adjustable Terminal 02167 "French Door Locking Pin"

French Door locking pin Manufacture/mode: Giesse 02167 Notes: Used as the top & bottom locking pins for French doors, swing doors, typically exterior doors. You may see this part in Eurotech French Doors. 3D Print Notes: - Material Type:…

Downloads
18
Likes
1
Rating
0
P
Printableszimbic

Determining Y and I (Určování Y a I)

The models of the letters Y and I are ideal for children who are learning to recognize and pronounce the letters of the alphabet. The model is designed to be visually appealing and interactive, encouraging children's imagination and…

Downloads
14
Likes
1
Rating
0
P
PrintablesRandomFilament

Dummy 13 - Terminator T800 Armor

This is a custom take on Dummy 13 with a Terminator-style twist. I really think Dummy 13 is perfect to make robots, so here's the most post-apocalyptic, gritty, scary robot out there. Have fun with it ! I used some modified parts of…

Downloads
10,074
Likes
2,823
Rating
4.72

Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1

CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…

Downloads
5,915
Likes
972
Rating
4.74
P
PrintablesMarc Neuhaus

Shelly DIN Mount with Wago 221 Terminals

I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…

Downloads
5,683
Likes
703
Rating
5

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

Downloads
4,503
Likes
524
Rating
4.88
P
PrintablesSpank

T800 Smooth Terminator Endoskull Printable WithBase (not ExoSkull)

No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7

Downloads
4,039
Likes
576
Rating
4.94
P
PrintablesConcreteHead

The Terminator

A Zbrush sculpt from the first Terminator movie. I provide the parts at the size i printed them, but if you want to save some printing time, please feel free to scale them down a little. To get the best out of these i would split the base…

Downloads
3,930
Likes
650
Rating
4.86
P
PrintablesMcginnis83

Terminator Pencil Holder

Remixed version of the Terminator skull

Downloads
3,899
Likes
414
Rating
4.97
P
PrintablesLayerLux3D

DIY Life-Size Terminator Arm Lamp

First of all. Thank you nracmo ( https://www.thingiverse.com/nracmo/about ) for the design! I have cleaned up a couple of parts, redesigned some of them to fit my need and raised the resolution. Further more i have designed a stand for…

Downloads
3,548
Likes
991
Rating
4.95
P
PrintablesJace1969

Terminator T800 Split Shoulders "Bust Concept"

T800 taken from many components here on thingyvers. I decided to whip up a T800 bust for a mates birthday. Then I got carried away and designed these make shift shoulders, then I couldnt help myself again and added some hands and so on.…

Downloads
2,189
Likes
383
Rating
0
P
Printablesepisco

Terminal for SSD1306 1.3" OLED and Wemos D1 Mini *NEW* Double Screen

Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…

Downloads
1,987
Likes
261
Rating
4.94
P
PrintablesQincon

WAGO terminal mount 221-415

The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…

Downloads
1,770
Likes
271
Rating
5
P
Printablesdenniseagles

Makita Battery Terminal

Battery terminal for Makita battery 18V. Designed to fit the battery mount by GPlatek https://www.thingiverse.com/thing:352094 Redesigned / Remixed from https://www.thingiverse.com/thing:863257 so that it is much easier to create the…

Downloads
1,596
Likes
216
Rating
5
P
PrintablesColin

Ethernet Cable Termination/Straightener Tool

This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…

Downloads
1,558
Likes
158
Rating
4.9
P
PrintablesGdprint73

Buste terminator T-800

Buste terminator T-800

Downloads
1,407
Likes
116
Rating
5
P
PrintablesMarin

PARKSIDE X20V_Team Battery connector with Faston terminal

Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…

Downloads
1,286
Likes
168
Rating
4.6
P
PrintablesMakerSteve3D

Terminator 2 T-800 CPU

This is my design of the T-800 CPU as seen on the Terminator 2 (extended edition) movie, specifically the scene where they decide to re-programme the T-800. If you like this design, please give it a like and follow my Instagram page to…

Downloads
1,276
Likes
197
Rating
5
P
Printablessimon vezina

Rlaarlo Omni Terminator Skid Plates

Under body protection for the Omni Terminator from Rlaarlo. You can re-use the stock bolts. You have 2 options. The full ski protection or the just the sides plates (L and R). Recommended ABS/ASA, but works just fine in PLA. If you use…

Downloads
1,142
Likes
81
Rating
5
P
PrintablesNeoRame

Terminal for SSD1306 0.96" OLED and Wemos D1 Mini

I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…

Downloads
1,141
Likes
152
Rating
5
P
PrintablesDavid McIntosh

Flashforge Adventurer 5M (AD5M) - drag chain termination at hotend - Smaller Profile Remix

Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.

Downloads
1,138
Likes
114
Rating
5
P
Printablessimon vezina

Rlaarlo Omni Terminator Roll Cage

I wanted to challenge myself with this CAD design and see if I could make a roll cage for my RC. The roll cage needs to be printed with some impact resistant material. I happily share this model for free, but it took me quite some time to…

Downloads
1,025
Likes
90
Rating
4.83
P
PrintablesPower Jojo

Terminator Arnold Head for dummy 13/Lucky 13

Terminator Arnold Head for Dummy13/Lucky 13

Downloads
1,023
Likes
131
Rating
3.33
P
Printablesaxel

battery terminal for Makita 18V battery adapter REMIX

This is a custom battery terminal for fablab.ee's Makita 18V battery adapter. This is designed to be used with 6,3mm blade connectors (red, blue). Just crimp on the cable and push it through the hole in the terminal. My print is a…

Downloads
991
Likes
102
Rating
5
P
Printablespeto.r_

The Terminator (Ready for casting)

ENGLISH description: Terminator t-800 Arnold Schwarzenegger figure model. Ready for painting and scaled up to maximum height for my Prusa MK3. (ca 20cm tall) Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for…

Downloads
867
Likes
86
Rating
5
P
PrintablesDaniel

Star Trek TNG Computer Terminal

Star Trek - The Next Generation Desktop Computer Terminal In an effort to create a small Raspberry PI based desktop computer for things like time logging, I got inspired by the iconic design of the computer props in many Next Generation…

Downloads
831
Likes
236
Rating
5
P
PrintablesGrafit

Terminator T-800 memorial coin

The fictional T-800 memorial coin I designed for #3Dprinting (mostly resin) Can be printed on FDM too, but for the best results resin printer recommended.

Downloads
820
Likes
137
Rating
5
P
PrintablesAbbLabb

Animatronic Terminator Eye

Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…

Downloads
782
Likes
220
Rating
0
P
PrintablesAuroraProjects

Battery Terminal Clip on Covers for lifepo4 280ah cells

Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.

Downloads
743
Likes
56
Rating
5
P
PrintablesSOLNEZ

Porta Fusible Automotriz para Terminal Aislada

Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…

Downloads
740
Likes
238
Rating
5
P
PrintablesMuffelkraft

Improved Makita LXT 18V Battery Terminal (643852-2)

This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…

Downloads
720
Likes
76
Rating
5
P
PrintablesSKSVideoguy

Terminator Head with LED Lights in Eyes.

This is an enlarged version of this model with LED eyes. Here are the settings I used to print this model : Printer: Bambu Lab X1 Carbon Cool plate Sunlu Black PLA HATCHBOX PLA Transparent Red 0.20mm Standard@BBL X1C Generic PLA Quality…

Downloads
719
Likes
74
Rating
5
P
PrintablesRedKB

Battery Terminal Cover - Press Fit for M8 Hex Screw

This is a press fit cover for a battery m8 hex screw terminal. I designed it to replace the small included covers on my RV battery that didn't adequately cover the wire lugs. I printed in PETG to protect from heat, and printed in both red…

Downloads
698
Likes
63
Rating
5
P
PrintablesFranchescor

Terminator Pencil Holder

Terminator Pencil Holder

Downloads
670
Likes
85
Rating
5
P
PrintablesDeluxeBabble

Shelly EM DIN Mount with Wago 221 Terminals

Since the Shelly EM has slightly different dimensions, I created this remix.

Downloads
660
Likes
61
Rating
5
P
Printables3dgar
Downloads
660
Likes
62
Rating
0
P
PrintablesLudiks

T800 Terminator Ring

The T800 ring ! Res 0.2 Print it as provided, with supports enabled (not much generated) for solidity and details. Pictures provided was made in 0.1 layers, Iam about to test a 0.05 with 0.2 nozzle. Ring size is 68mm in circumference,…

Downloads
632
Likes
114
Rating
5
P
PrintablesJace1969

Terminator 40Watt Plasma Rifle ( Designed by Killonious)

Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…

Downloads
603
Likes
43
Rating
4.67
P
PrintablesWingWong

Flashforge Adventurer 5M/Pro: Simpler Drag Chain Termination (1 Piece Print)

Recommend using a brim. STL is already oriented ready to print.

Downloads
599
Likes
58
Rating
5
P
PrintablesGraFabLab.com

Terminator-skull inspired can holder

Der Getränkedosenhalter ist eine beeindruckende Mischung aus Schädelkunst und futuristisch-mechanischem Design – fast so, als hätten ein Bildhauer und ein Sci-Fi-Konzeptkünstler gemeinsam an einem düsteren Kunstwerk gearbeitet. Form und…

Downloads
591
Likes
108
Rating
5

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.1)

NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…

Downloads
583
Likes
39
Rating
4.67
P
PrintablesRobotRogue

LRS-350-24 Terminal Cover - Voron Edition

LRS-350-24 Terminal Cover - Voron Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. It even lets you more safely tweak the voltage adjustment without fear of tapping a hot terminal. Print it however you like.…

Downloads
572
Likes
64
Rating
4
P
PrintablesJAPOLabs

Arduino Nano Terminal Adapter

This design allows you to attach an Arduino Nano through the popular Deek-Robot Nano Terminal Adapter in a more robust fashion to your projects. It allows a pretty degree of stability in front of movements and vibrations with 4 attachment…

Downloads
562
Likes
65
Rating
4.5
P
PrintablesMadHulk

Arduino Nano Screw Terminal DIN Rail mount

This is a DIN rail adapter for an Arduino Nano Screw Terminal. Used Terminal Adapter: Terminal Adapter You also need some M3 spacers/nuts/screws: M3 Screws

Downloads
551
Likes
58
Rating
5
P
PrintablesOurAngryBadger

Battery Terminal Covers for M8 LiFePO4 Batteries

Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…

Downloads
539
Likes
33
Rating
4.8
P
PrintablesR&D

DIN rail terminal endstop

This is a small wiring terminal endstop, to keep them straight, and also doesnt let them slide around. It utilises two screws instead of an angled one.. The screws are self tapping into the plactic. The endstop can be simply snapped onto…

Downloads
537
Likes
40
Rating
5
P
PrintablesAdrianM.

Gear knob Terminator T800 skull

Gear knob Terminator T800 skull Lever hole diameter 12 mm Software: PrusaSlicer 2.7.1 Infill : 10% Brim : YES Skirt : No Support : YES Perimeters : 4 Top/Button : 4 Layer height: 0.2 mm Material : ABS If you print this accesories please…

Downloads
535
Likes
63
Rating
5
P
PrintablesRumbledoc

Wago 221-41X Terminal 2x2 2x3 2x5

Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung. Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante. Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es…

Downloads
515
Likes
36
Rating
5
P
PrintablesCrashOverride

Terminator T-800 Bust Remix with Primary Color Accents

I'm delighted to share with you a refined version of the Terminator T-800 bust, originally posted by machina on August 23, 2014. This remix brings the iconic model to life by adding intricate details using three primary colors. The…

Downloads
508
Likes
63
Rating
0
P
PrintablesJMCR

Terminator Bust

Terminator Bust

Downloads
508
Likes
61
Rating
5
P
PrintablesWingWong

FlashForge Adventure 5M/Pro: Cable Chain Termination for AliX Kit Cable Chain (Remodel and Raised)

V2: Remixed David's newer chain since I was having sag problems. Remodeled it and raised it up by 8mm. STL is already in correct print orientation.

Downloads
504
Likes
66
Rating
5
P
PrintablesICE

Terminator T-800 CPU Stand

A Terminator T-800 CPU Stand as it is seen in the movie at Cyberdyne Systems. I modelled it for friend which completed the print, just print the side parts twice, some kind of metal (like a cut knitting needle etc) is needed to hold the…

Downloads
494
Likes
95
Rating
5
P
PrintablesBasementLAB

Thermal Paste / Epoxy / Glue Spatula - Spatola ergomica per pasta termica / colla

Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…

Downloads
493
Likes
61
Rating
4.75
P
Printablesantagonizerr

Terminator CPU Chip (broken) Movie Accurate

There are a lot of CPU chips to print but none of the 'broken' ones were quite good enough for my project of displaying it under a glass dome much like the terminator arm. This is my take on the broken CPU chip as movie accurate as I…

Downloads
492
Likes
60
Rating
5
P
PrintablesMakeseum

ESP32 Screw Terminal Adapter DIN Mount MRD068A

Adapted for the MRD068A ESP-32 Screw Terminal adapter. Hole spacing is 60mm. Need to print 2x ESP32-Terminal-DIN-Mount.stl

Downloads
490
Likes
34
Rating
5
P

Terminal for SSD1106 1.3'' OLED and NodeMCU v3 ESP8266, without soldering

This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…

Downloads
483
Likes
47
Rating
0
P
PrintablesModel Magic

The Terminator - T-800 Endoskeleton - 1984

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
469
Likes
57
Rating
5
P
PrintablesAndré

Computer terminal for Nemesis

Almost a direct copy of the remix source, but I added solids under the floating keyboards to make it printable. Category: Toy & Game Accessories

Downloads
467
Likes
39
Rating
5
P
Printablesps915

Eve LiFePo4 LF304 Terminal Cover

Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…

Downloads
466
Likes
48
Rating
5
P
PrintablesGrubbyZebra

Prusa Mk3 Ring Terminal 90 Deg Heatbed Cable Cover

I needed a low-profile 90 degree cable cover for the Mk3 that would allow it to fit in an Ikea STUVA cabinet. I couldn't find one that worked and accommodated ring terminals, so I designed one, instead. Perfect fit using 90 deg. terminals…

Downloads
459
Likes
85
Rating
4.75
P
Printableshuskyte

Terminal Block for solar installation (with Mega fuse)

A self designed terminal block for your solar installation. It was designed to fit a mega fuse as well. It also can be used as a single terminal without fuse. The cover prevents accidantial discharges. All you need is 2 M8x25 plus 4 M8…

Downloads
456
Likes
62
Rating
4.33

small cover for Meanwell LRS and RSP series power supply terminals

A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…

Downloads
450
Likes
37
Rating
4.78
P
PrintablesPrintercat64

Ender 3 v2 PSU 120mm fan and wire terminal cover

Remixed to keep everything cool and quiet. Modeled for the be quiet! Pure Wings 2 fan, but should work with other 120mm fans as well. Overkill for sure, but I already had these fans on hand from an old PC build. note. Due to the extra…

Downloads
439
Likes
63
Rating
5
P
PrintablesToxicMaxi

The Terminator Logo

The Terminator logo in 3D. 5mm high.

Downloads
436
Likes
47
Rating
5
P
PrintablesConcreteHead

TechNoir Terminator

A simple bust (two parts), if you use Prusa Slicer all parts are aligned as i printed them. I recommend 5% infill an overhang angle of 28 (for support enforcers only) and 0.15mm layer height.

Downloads
426
Likes
39
Rating
0
P
PrintablesModel Magic

The Terminator - T800 - 1984

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
411
Likes
60
Rating
0

Prusa Lack Enclosure Heatbed Cable Clamp - 60 Degree, for Screw Terminal Heatbed and Textile

I saw several versions of this cable clamp that reduces the overall functional depth of the Prusa printers to be able to fit inside a Lack enclosure. However, many of the existing versions were made prior to the switch to screw-terminal…

Downloads
410
Likes
35
Rating
4.43
P
PrintablesAntimaterie

victron shunt terminal cap

in addition to my cover of the shunt https://www.printables.com/model/255704-cover-for-victron-shunt I created a cover of the terminals of the shunt. print instructions variable/adaptive layer height is nice to make rounded edges look…

Downloads
406
Likes
45
Rating
0
P
PrintablesJermyn

Shelly 1 Gen 4 DIN Mount with Wago 221 Terminals and I/O Labels

Remix to suit Shelly 1 Gen 4 and changed the Labels to I and O

Downloads
399
Likes
22
Rating
5
P
PrintablesRobotRogue

LRS-350-24 Terminal Cover - Voron Switchwire BOM Compatible Edition

LRS-350-24 Terminal Cover - Voron Switchwire BOM Compatible Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. This is an updated version for anyone building a BOM Voron Switchwire, added notches to allow the…

Downloads
398
Likes
87
Rating
4.25
P
PrintablesMuckychris

Terminator T-800 | The Original Pop-Culture Buddha

Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…

Downloads
382
Likes
80
Rating
5
P
PrintablesDaniel Frank

W1209 Termistor Enclosure

Are you looking for a simple enclosure to hide your PCB? You've found one! Assembly is pretty straightforward, here's what you need: 1x Top cover (print) 1x Bottom cover (print) 3x Button (print) 4x M3x10 bolt (you can optionally use…

Downloads
381
Likes
31
Rating
5
P
PrintablesTbyD

Mastermind

I printed this model with the main parts in PETG (.20mm layers, 4 perimeters, 6 layers top & bottom, 20% infill, no supports (except the Peg Cover) ) and the pegs in PLA. The 3MF files are included with print details. Main points: Game…

Downloads
380
Likes
62
Rating
4.83
P
PrintablesModel Magic

Terminator 2 - Sarah Connor - 1991

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
379
Likes
56
Rating
0

Positive Terminal Base Cover (E46,E83) for BMW

Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament. BMW (E46 3 Series (not M3), E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138385158) Category: Automotive

Downloads
378
Likes
68
Rating
5
P
PrintablesAdmiralSym

Note10+ Slider Terminal Case

This is a Bluetooth sliding keyboard case for the Samsung Note10+. This is the first complete iteration of this design, but it still requires a decent amount of refinement to be where I'd want it. Issues/Action Items: The keyboard bezel…

Downloads
376
Likes
70
Rating
0
P
Printables3d tisk - Sam

Terminator T800 bust with pedestal

A realistic and highly detailed bust of the Terminator , now complete with a custom-designed pedestal for a more dramatic and polished display. Inspired by the iconic T-800 endoskeleton from the legendary sci-fi franchise, this 3D model…

Downloads
376
Likes
53
Rating
0
P
PrintablesFarnsworth

WEHO LRS-250m DIN rail mount and terminal cover

DIN rail mount and terminal cover for the WEHO LRS-250 PSU. (might fit other models, Meanwell LRS-200 series seems to have the same dimensions). Terminal cover can be opened without tools. Prints without supports. Printed in PETG at layer…

Downloads
376
Likes
36
Rating
4.75
P
Printables3DCraft

Terminator T-800 Endoskeleton (The Terminator)

Iconic T-800 endoskeleton from The Terminator movie, detailed sci-fi robot model with exposed mechanical structure.

Downloads
375
Likes
38
Rating
5
P
PrintablesMadSoul3D

Terminator T-800 Playmobil

Remixed from the awesome Kazolar´s T-800 model. ¿Looking for similar designs? Look at this: https://www.thingiverse.com/madsoul666/designs I'll be happy to see your Make!! ENJOY!! Tips are welcome ;D Category: Toys & Games

Downloads
367
Likes
52
Rating
4.5
P
Printablesnotyahc67

Nikon Flash PC Sync Terminal Cap for F F2 F3 F4 F5 FA FG FE2 FM2 F100

I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…

Downloads
365
Likes
33
Rating
5
P
PrintablesSenki_86

Terminator

Thank you for downloads, likes… Enjoy !

Downloads
364
Likes
56
Rating
0
P
PrintablesOtto

Mastermind

Mastermind is a game where must solve your opponent's code. Printing instructions Print 16 code pegs in all six different colors. Print 25 key pegs in white and 25 key pegs in black. Glue the decoding board to the cover. Rules of the game…

Downloads
361
Likes
98
Rating
5
P
Printablessteve

Display clip for OLED terminal

I really liked @episco 's OLED terminal but didn't wand to glue the OLED into the frame so I came up with this little clip to hold it in place. To install it, just put the OLED display and the the clip in place and push the clip down. Due…

Downloads
358
Likes
33
Rating
5
P
Printablesloicloic

Voron V0/V0.1 Mean Well PSU Terminals Cover

Simple Terminals Cover for the V0/V0.1 Mean Well LRS-100-24 or LRS-150-24 PSU. STEP file provided if you'd like to tweak it. Below the requirements and settings, settings are from the Voron Manual, a bit overkill for this but at least you…

Downloads
355
Likes
73
Rating
5
P
PrintablesModel Magic

The Terminator - T-800 Battle Scars - 1984

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
353
Likes
51
Rating
0
P
PrintablesSpaceman Spiff

LEGO Terminator LG Minifig (X4)

To go along with my other creations, I give you the Terminator Minifig, in Large Format. The remix section was not working so here are the Things I used to create this guy: 438789 3536767 4457709 Print Settings Printer Brand: Creality…

Downloads
348
Likes
68
Rating
3.5