Counting matching models…
Remix of design found here: https://www.thingiverse.com/thing:1668774 I added some screw sockets, 3mm thickness and moved the place for PSU to the bottom, so the PSU lies flat on the case. Tested with SilverStone TX500 and TX700. PSU fan…
Bracket to adapt a SPX form-factor PSU to a 2U FLEX case. Tested with a Fantec SRC-2080X07 case and Silverstone TX500 Gold PSU. Check your PSU to see if the power socket is in a similar position. I have adjusted the model so as not to…
A portable 8L ITX case heavily inspired by the Fractal Design North. Supported hardware: ITX motherboard TFX power supply 2 slots low profile (half height) GPU 3x 92mm or 80mm case fan CPU cooler: Thermalright AXP120-X67 or smaller…
Adapt a Flex* ** power supply for use with TFX. No nuts/inserts needed! Just use your 6/32. Require 6/32 x 1/4 countersunk screws for the PSU. Shorter ones may work, but engagement depth will be minimal. 3.5 in HDD mounting screw should…
I made this mount adapter for using my Seasonic SS-300TFX PSU on my open case. On the ATX side, there are 4 screw holes (threaded) - UNC #6-32 | ¼ in On the TFX side, there are 3 screw holes (passthrough) - UNC #6-32 | ½ in It also comes…
TFX PSU Power Supply Rack Mount - Left and Right Side A 3D model designed for mounting TFX power supplies in rack cabinet - allowing secure and stable placement of the power supply in a 19-inch rack cabinet. Compatibility: Standard TFX…
This bracket allows you to use a standard (although not terribly common) TFX power supply in a case which takes a standard ATX one. You'll need 7 screws; 4 to mount the bracket and 3 to mount the PSU to the bracket. Made in PLA, printed…
Upgrade your Lenovo M720T with ease using this custom TFX to Flex PSU bracket . Designed for seamless compatibility, this bracket allows you to replace the stock TFX power supply with a Flex ATX PSU , offering greater flexibility and…
Adaptér pro serverové 2U case z redundantních zdrojů na TFX.
A simple adapter bracket that lets you install any Flex-ATX form factor PSU into a case originally designed for a TFX power supply . Great for upgrading small form factor or 1U builds where TFX PSUs are hard to find or underpowered, while…
2U shelf to mount 2 TFX power supplies in a 10 inch rack cabinet. It features side spaces to shove the unusued cables (useful if you don't have full modular units). The provided .3mf file contains multiple models. The one named "Corpo1"…
Stačí použít běžné šrouby co se v PC používají, jak do zdroje, tak i do plastu, tam si vyřežou samy závit a vše pevně drží. Je to i navržené tak, aby dva šrouby držící zdroj (aspoň v mém případě) držely i za plech, tudíž je to o něco…
Ich baue meinen K40 auf den ReplicantFx Mod um. Ich habe aber ein CloudRay Linsenhalter und Spiegel System. Die Teile habe ich mir soweit möglich rausgemessen. Keine Garantie auf Präzision, da ich zum Zeitpunkt des Uploads noch nicht…
The Inter-tech 2U-20240 case did not come with a matching bracket for my TFX power supply so I made this one instead. The model is made with onShape and can be found here if you want to change something:…
I have a proprietary Lenovo desktop with an i9-9900 CPU. It has a TFX shape PSU with non-standard outputs. I decided to move everything to a bigger case and use a 2nd power supply, with an 8 pin GPU connector on it, wired to start when…
this model is used to replace a noisy TFX power supply with a silent Pico PSU. It will close the hole and gives a mounting option for a 70mm fan.
Pin spanner takes 1.6 mm steel rod pieces pressed in with a vice for the pins. Adjustment tool uses sheet steel cut to size and pressed in for the 2 "blades". Replacement Cap and Spring cap are untested. Category: Sport & Outdoors
This bracket allows you to use a standard (although not terribly common) TFX power supply in a case which takes a standard ATX one. You'll need 7 screws; 4 to mount the bracket and 3 to mount the PSU to the bracket. Made in PLA, printed…
2U shelf to mount 2 TFX power supplies in a 10 inch rack cabinet. It features side spaces to shove the unusued cables (useful if you don't have full modular units). The provided .3mf file contains multiple models. The one named "Corpo1"…
Used on an HP slimline PC after an upgrade to use a PicoPSU I had from another project with it instead of the old defective TFX supply. Source fusion 360 file included. Printed on my modded DD ender 3 at 0.16mm layer height at 15% infill…
