Counting matching models…
A two piece, glue together model of the Detroit Tigers “D” logo. The Inner piece features three slots for embedding magnets inside the print if desired. (2) magnet holes: 23.5mm x 5.5mm high (1) magnet hole: 19mm x 5.5mm high Can also be…
Missouri Tigers logo and keychain (logo w/ hole punch) in separate files. Verify the color change heights in your slicer, but for me at .2mm layer height, color changes were at layer 11 and 21. Might be able to scale down a bit if using a…
🐯⚾🧲 Detroit Tigers Logo Magnet 🧲⚾🐯 Show off your team pride with this Detroit Tigers magnet , featuring crisp, clean color separation for a bold 3-D look. 💡 Print Details: Original Version Thin Version Settings 100% infill, 0.2mm layers…
Here is the awesome looking Detroit Tigers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used: https://makerworld.com/en/models/25960#profileId-639228 )…
LSU Tigers Oversized Necklace Retro Logo that I designed. I hope that you enjoy!
LSU Tigers Oversized Necklace Logo that I designed. I hope you enjoy!
Hello & thanks for checking out my model. This is the logo for the National Rugby Leagues Wests Tigers that I have designed to be a 3D printed magnet. I have included 3 files ( Black, White & Orange ) for use with MMUs or multi color same…
Detroit Tigers Oversized Necklace Logo that I designed. I hope you enjoy!
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Detroit Tigers Earrings I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace Needed. Just color swap at layer. Can be made into a pendant and/ or Keychain by scaling up. Check out my large selection of earrings .…
Clemson Tigers Oversized Necklace Logo that I designed. I hope you enjoy!
These are stencils that you can use to spray the Flying Tiger's Hell Angel. There are 2 versions - standing and sitting. These were stenciled on the P-40s used by the American Volunteer Group (AVG) also known as the Flying Tigers in World…
ATA Martial Arts training weapons for the younger Tiger class. Really helpful for travel and spare practice. My daughter loved them in purple and pink. These were dimensioned almost exactly to the ATA versions. These even provide the air…
Auburn Tigers logo that I designed for an oversized necklace. I hope you enjoy!
Auburn Tigers Retro Oversized Necklace Logo that I designed. I hope that you enjoy!
This is a remix of a RC Tigershark from Foamyfactory (for free): https://www.youtube.com/watch?v=Q_VcNlOTu8g http://www.rcgroups.com/forums/showthread.php?t=1615202#post34604707 http://www.rcgroups.com/forums/showthread.php?t=1398060…
Logo der Eishockey-Mannschaft “Straubing Tigers” aus Straubing in Bayern. Zum Drucken mit der MMU3 in 5 Farben. Logo of the ice hockey team “Straubing Tigers” from Straubing, Bavaria. For printing with the MMU3 in 5 colors.
Updates February 16/26 - Added 100 & 175mm with and without Hangers Printer Settings PrusaSlicer - 2.9.4 Nozzle - 0.4 Layer Height - .2 Perimeters – 2 Minimum Shell Thickness Top and Bottom – 2mm Top Fill Pattern – Monotonic Lines Bottom…
Auburn Tigers Alternate Oversized Necklace Logo that I designed. I hope that you enjoy!
Missouri Tigers Alternate Oversized Necklace Logo that I designed. I hope that you enjoy!
🐯⚾🧲 Detroit Tigers Retro Logo Magnet 🧲⚾🐯 Print Details: 100% infill, 0.04mm layer height (0.16mm base) Size: 60x60x2.36mm (includes 8x1.5mm magnet slot) (Easily Resizable) Filament Usage: 8.27g Print Time: 36m ⚠ Important: You must…
Missouri Tigers Oversized Necklace Logo that I designed. I hope you enjoy!
Protect your table, stow your beverage and show your support for the greatest Japanese baseball team! Essentially this is a 3D model of the Hanshin Tigers logo with a bit of added depth for different elements, might look nice scaled up…
this is a model of A F 20 TIGERSHARK THAT HAS 4 MISSILES
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
Printed mine in Overture sparkle blue and regular orange PETG. You can choose to do this in 2 different colors like mine or in one color which still looks cool.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
Kingman Academy earrings One of the local high schools requested these. So I thought the mascots might be useful to others. I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap…
This is made to replace the rudder on my TigerShark rc boat. You would need to cut the bottom of the rudder off, just above the bearing housing. Then using epoxy and a few nuts and bolts attach the bottom ahlf to the rest of the rudder…
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
The Detroit Tigers version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks of…
Была сломана ручка. Потрескалась от времени. Полностью печатать не позволяет принтер. Поэтому решил заменить частично. Средняя часть сохранилась нормально. Боковые отрезал и заменил. Приклеил на полиуретановый герметик. The handle was…
Updates February 16/26 - Added 100 & 175mm with and without Hangers Printer Settings PrusaSlicer - 2.9.4 Nozzle - 0.4 Layer Height - .2 Perimeters – 2 Minimum Shell Thickness Top and Bottom – 2mm Top Fill Pattern – Monotonic Lines Bottom…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Detroit Tigers 2 plate build. Print each plate and then glue pieces together.
Detroit Tigers Retro Oversized Necklace Logo that I designed. I hope you enjoy!
🐯⚾🧲 Detroit Tigers Magnet 🧲⚾🐯 Print Details: 100% infill, 0.08mm layer height (0.2mm base) Size: 73x86x2.44mm (includes 8x1.5mm magnet slot) (Easily Resizable) Filament Usage: 12.41g Print Time: 39m ⚠ Important: This print uses my custom…
The settings will vary depending on printer and slicer. I used Orca Slicer with Elegoo Neptune 4 Plus. Find each part below label in the color that it is. Please refer to your own research as to print multi colors. This is meant to print…
Do you like cookies?! Of course you do... you're not a monster... Do you like the Hanshin Tigers?! Of course you do... you're not a monster... This simple cookie cutter will allow you to make your very own biscuity treats in the shape of…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Created the P-40 Warhawk Flying Tigers wall art model by creating a SVG file. Then importing the SVG file into Fusion360, then editing and creating the STL. Printed on the Creality Ender 3 Pro and the Creality K1. I am printing this on…
Roar with team spirit with this dynamic 3D printable lightbox featuring the logo of the Straubing Tigers Ice Hockey team. Crafted with precision and passion, this emblematic design pays homage to the renowned German ice hockey team. Ideal…
