1 / 3
Detroit Tigers Magnet (Low Waste)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in Hueforge for low waste & swaps
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🐯⚾🧲Detroit Tigers Magnet🧲⚾🐯
Print Details: 100% infill, 0.08mm layer height (0.2mm base)
Size: 73x86x2.44mm (includes 8x1.5mm magnet slot) (Easily Resizable)
Filament Usage: 12.41g
Print Time: 39m
⚠ Important: This print uses my custom HueForge print settings, which turns all fans off. If your printer is fully enclosed, make sure to crack the door/top or manually turn the fans back on to avoid overheating issues.
Filaments Used (3 Colors):
- 🏳 Ivory White (TD: 3.5)
- 🔵 Dark Blue (TD: 1)
- 🔴 Scarlet Red (TD: 1.8)
Swap Instructions:
1 Start with Ivory White
2 Layer #25 (2.12mm) – swap to Dark Blue
3 Layer #27 (2.28mm) – swap to Scarlet Red (for the rest)