Counting matching models…
Introducing the FidgetKey! Relieve your stress with this contraption that mimics a mechanical keyboard key! Using a small, built-in spring, this is fully print-in-place and has an interchangeable keycap for custom options! Rook Keycap by…
For soldering instruction check out: https://www.printables.com/model/269757-stream-deck-marco-keyboard Make a test print of the base to ensure that your pro micro fit is snug. I did not have a need to glue mine. AutoHotKey Script Read…
Clip-on adapter that allows you to attach your YubiKey to your keychain while still be able to remove it without disassembling the entire thing. USB-A and USB-C versions (USB-C YubiKeys are a bit thicker). Tested with YubiKey 5 NFC,…
This is just the updated version of my golf simulator control box for GSPRO. This will eventually make it into production as my version 2 of my no program plug and play golf simulator control box. As always I make them available so people…
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
Zoidberg is a case for the LilyGo T-Deck that has been designed to have the smallest bezels feasibly possible (3mm!) with an internal structure that supports and protects the devices components. It does this while requiring no nuts, bolts…
Lost your Smartkey to open the Zaptec Pro and switch the breaker? Remove the front cover using the SmartKey special tool.
These are the models for my Autohotkey Streamdeck with Unified Communicator Keycaps. It houses a raspberry pi pico, RGB Leds and 4 Cherry MX switches. See https://buildcomics.com/3d-printing/a-microsoft-teams-adventure/ for the…
This is a tool used to rekey a Kwikset Smartkey lock that you do not have a working key for. It works by depressing the five sliders simultaneously which then allows you to turn the cylinder a quarter turn. You can then use the Kwikset…
More buttons for Fysetc Hotkey
Just some more system hotkey buttons, Left to right I've got, load-unload, Preheat, and finally cancel print
Nothing exciting just a pause resume set of buttons for the fystec hotkey kit, Currently untested as my kit hasnt arrived just yet
Since upgrading my printer to Klipper, the original LCD touchscreen became obsolete and I found the Fysetc Voron Skirt Hotkeys on AliExpress. Since having some of the most used macros on hand at the printer without always needing an…
A phone/iPad holder for the OrbitKey DeskMat. The module requires 4 magnets with a diameter of 15mm and a thickness of around 2mm. With this, I can put my phone easily. For an advanced hold(tablet), I glued a 10mm diameter and 2mm…
Sometimes I get bored, so I create things. If you like them, you can make them for yourself
Shift Universal Akku transport case für 2 Akkus Fully 3D Printed, hinge is a 1,75mm Filament 4x 5x3mm Magnet Passend für Universalakku der Shiftphones Or just Buy it here: https://www.segelwelt.org/index.php?id_product=20&controller=product
This allows a Kwikset Smartkey lock to be easily mounted into a vise. The cutaway model provides an opening to the top of the sliders for easier learning of this lock.
These are additional accessories for the OrbitKey desk mat. These modules require magnets with a diameter of 15mm and thickness around 2mm. For an advanced hold, I glued a 10mm magnet onto the big one. Through this, I get zero wobble. The…
Unload & a raise bed/toolhead button in the style of TheKwijibo's buttons.
Since I got rid of my car key, I did not find a need for a keyring on my orbitkey. I wanted to keep my airtag however and couldn't find a mount for it that utilised the closed ring that was a part of the orbitkey. This modified model…
Built for an orbitkey desk mat's magnetic base (similar style to the magnetic cable holder that comes with the mat). Uses 4 6x3mm neodymium magnets to attach to the desk mat. The magnets can be press fit by pressing it down on a tabletop.
Made an attachment for the OrbitKey mat system for the Clickable TouchID case ( https://www.printables.com/model/355924-c ). Needs 5x 6x2 magnets to make it stick to Orbitkey desk mat rails I printed in PETG, but no reason any other…
top voron v0.2 https://github.com/FYSETC/Hotkey
Printing parameters dependent on the person printing. Better effect only if the Voronoi structure is printed in yellow/gold, and the batman symbol in black. I printed it with a layer height of 0.2 mm and minimal support material.
Its the missing smartkey holder for the key blade. The remote can be purchased at motor-X and the blades at aliexpress.
Warning this has not yet been tested. Printed, but not tested. Currently developing the idea. Appreciate any input. Print with honeycomb infill, 0 top and bottom layers.
Uchwyt Do Montażu Na Ścianie, Dla Balansera Aktywnego GIANTKEY Wersja 4A. Materiał na Moim Kanale YT: - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista…
Simple Case for 4 capactive buttons which trigger hotkeys to your system. The buttons are attached with hot glue. Full code: https://github.com/pixelEDI/Arduino_OBS_Hotkey
Port covers for Portkeys BM7 II DS (may work on other monitors as well) List of Covers: single SDI double SDI tripple SDI SDI2 & HDMI In & Out 2-Pin Lemo Motor Control (DC IN Port available on request) !!! I highly recommend printing in…
The magnets needed are 8x2 mm magnets. The slots for the magnets are a tight but exact fit so when you push the magnets in you'll need to apply pressure against something to push the magnet in. I used my desk for example. I hope this…
This is a replacement for the leather Orbitkey that I had for a long time, and it wasn't nice. I have created 2 versions - with a pattern and without, or you can customize it yourself. Uploaded with STEP file.
A replacement for the plastic SmartKey clamshell used in Morse Watchman KeyWatcher. Had one break at work so I grabbed the iButton out of it to make a replacement. I paused the print around 6mm to slip the iButton into the new print. The…
This is a small part that lets you clue or drill the part onto a wall/cabinet to attach your keys with an OrbitKey Clip v2 onto it to have your keys always in place. It uses 6mm diameter and 2mm thickness magnets. I used a screw and small…
please glue in 4 magnets 6x3mm no supports, 3 wall lines, 15% (or more) infill
https://github.com/TheEinfachFelix/Wled_Ringer
The Lunarkey A keyorganizer heavily inspired by Orbitkey. I liked the design but it's quite expensive for a piece of silicone and injection molded plastic, so I remade it. It can hold a few dozen keys, I have 9 on mine and it depends…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
VinFast TheonS SmartKey Holder
This is a quick and dirty cage style mount for an Amulet Hotkey DXZ4 zero client. The zero client slides in from the rear. In my case I purposely mounted it slightly tilted forward so it didn't work its way out the rear somehow. Keyholes…
Voron Trident 350 Clicky-Clack Fridge Door Skirts - Integrated Macro Buttons Mod This is a remix of the excellent front skirts by @DankMona_567227, designed for a Voron Trident 350 equipped with the Clicky-Clack Fridge Door (which moves…
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
This is a tool used to rekey a Kwikset Smartkey lock that you do not have a working key for. It works by depressing the five sliders simultaneously which then allows you to turn the cylinder a quarter turn. You can then use the Kwikset…
A Gridfinity bin for Portkeys PT6 monitor It is a part of my small portable director's monitor project(last photo): Video transmission gridfinity bin Made it by combining a gridfinity generator + trace AI, so the pocket's bottom part is a…
A holder for BitKey ( https://bitkey.world ) that supports Gridfinity by Zach Freedman ( https://youtu.be/ra_9zU-mnl8 )
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
Port covers for Portkeys BM7 II DS (may work on other monitors as well) List of Covers: single SDI double SDI tripple SDI SDI2 & HDMI In & Out 2-Pin Lemo Motor Control (DC IN Port available on request) !!! I highly recommend printing in…
Unload & a raise bed/toolhead button in the style of TheKwijibo's buttons.
0.16mm layer height strongly recommended 4 magnets needed: size 8x2mm 3 wall lines recommended (but 2 wall lines is fine, too)
A Gridfinity bin for Portkeys PT6 monitor It is a part of my small portable director's monitor project(last photo): Video transmission gridfinity bin Made it by combining a gridfinity generator + trace AI, so the pocket's bottom part is a…
A holder for BitKey ( https://bitkey.world ) that supports Gridfinity by Zach Freedman ( https://youtu.be/ra_9zU-mnl8 )
This is housing for the mose peddle TKEY-1 of EA3GCY found at https://www.qrphamradiokits.com/cw-keyers/tkey-1/#cc-m-product-12119738349 I have added a power pin hole and 3.5mm stereo jack Category: Electronics
Non-imprinted flat keycaps. Three types are available: 1u, 1.5u, and 2u. CherryMX type keycap. I wanted a cap with a height of over 9mm, so I sampled the size of keycaps I had around me and made it by myself. I also attached support bars…
Remix from OrbitKey Magnetic Cable Holder Built for an orbitkey desk mat's magnetic base (similar style to the magnetic cable holder that comes with the mat). The magnets can be press fit by pressing it down on a tabletop. This remix uses…
