Counting matching models…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
How to use Validation Matrix (Tyler Schubert) https://youtu.be/GL-9Ia0SibQ The Validation Matrix must be printed with 4 or less base exposures for a correct test result. ------------------------------------------------------ The…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, there are two different versions available: a “Hard to press in” and an “Easy to press in” version. Choose whichever you prefer, one…
It's a big skeleton that is inspired by a Lego skeleton. If you want to know more about this project or see more pictures, check out my project documentation page . This is also available on Thingiverse . If you like this model, check out…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Fully Articulated Skeleton Hand License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height:…
WARNING: Contains small parts. Not intended for children below 3 years old. Santa Hat now available! Download it here! Printable assembly guide now available for download. A base/diorama builder is available for download for this mini…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
Build your skeletal army! This model features a highly poseable skeleton figure as well as an imposing suite of weapons. Printing and assembly For best results, print the skeleton parts in ASA. PETG is all right too. PLA for the skeleton…
The head and body are two separate parts. Simply click the head onto the body. Please be careful when doing this! Tips for printing: Filament: PLA Supports: No! Layer height: 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall…
Simple holder for Cotton pads and tips I also made Makeup brushes and sponge container in similar style
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…
This model is free, please donate to one of Ukraine's relief efforts instead: https://donate.redcrossredcrescent.org/ua/donate/~my-donation?_cv=1 https://news.un.org/en/focus/ukraine/donate https://www.comebackalive.in.ua/ Model…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
[Updated 2024-10-29: Added link to other Halloween Models.] Check out my collection of Halloween Models: [Updated 2024-10-21: BIG-BONE-KNEE UPGRADE Update notes: Based on feedback, the updated version contains: Thickened joints,…
Bring some rattling fun to your desk, shelf, or backpack with the Jolly Skeleton ! Designed in a simplified, cartoonish style, this adorable skeleton features a big round head, plump little hands, and boot-like feet. The head and jaw are…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Designed to move bones and make different positions of the hand and reposition it back. This model is meant to be printed with TPU to be durable. With PETG or PLA it is also OK for few moves of each part. With stand to position it…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Do not recommend printing any smaller than the default .…
Tested print profile for the articulated Skeleton Axolotl 0.20 mm layer height 2 wall loops 15% sparse infill PLA One plate Print-in-place No assembly required It has been successfully printed with and WITHOUT supports - up to printer…
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE SKELETON HEAD ROSE /…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
Print-in-Place Fidget Button A compact, stress-relieving gadget designed for endless tactile satisfaction. This fidget toy is perfect for anyone who enjoys clicking, pressing, and fidgeting to stay focused or calm their nerves. The…
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
An articulated dinosaur skeleton with a removable skull. A T-rex, Ceratosaurus and Allosaurus style skulls are included. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or…
Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…
Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
Elevate your Halloween decor or add a quirky touch to your home with this unique skeleton figure, stylishly dressed in a hoodie. This model serves as an excellent decoration piece or a fun, eye-catching print for enthusiasts. This model…
This adorable mini skeleton is the perfect mix of spooky and cute! Whether you want to display it on your desk or carry it everywhere as a keychain, this model comes with both versions included. Great as a Halloween accessory, a fun gift,…
no supports infill 15% no rafts
This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
This skeleton is a remix of Posable Skeleton (from Fub-Artistry), which is itself a remix of Mr Bones (from graphix25). Since I'm on the topic of giving credit, I will also mention that the split ribs files come from Mr Bones Chest Remix…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
3 support-free skeletons. All dead, just animated by evil magic. EDIT There is a modified version of halberdier with reinforced leg. Suitable for 28mm tabletop games. Created so that they do not need any supports and print well on a cheap…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…
Skeleton Hand Bookstop Halloween is just around the corner! Get your home ready for the spooky season with the Skeleton Hand Bookstop . This striking and functional bookend securely holds your favorite books while acting as a captivating…
This snacking tongs will keep your hands and fingers clean while enjoying a bag of cheese puffs, chips or any other bite sized snacks. Requires no effort to keep it in between your fingers. UPDATE - added flat profile version per…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
I remixed the skeleton parts in Tinkercad into a simple kit card making it great for kids and party's. I made to the links connecting the bones only two layers thick at 0.2 layer height, making for easy removal. Check out the original…
Tiny articulated Skeleton Dragon Keychain now available to download! This dragon is very unique with lots of details and fast to print as a keychain. It's also very flexible and I provide you a 3mf Multicolor File to highlight some spots…
Easy to print, easy to use. Always ready. Prepared EU tokens with many logos - car brands, PrusaSlicer and Printables logo, animal themes and other symbols, but almost any logo can be used by modifying a empty one. Now available update…
Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…
Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Welcome to The Low Poly Auto Show! This is a low-poly Aston Martin Vulcan. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. The wheels car be printed at larger layer…
Assembled Dimensions (LxWxH) 167 x 30 x 67 mm (100% scale) Buildplate Dimensions (LxWxH) 114 x 117 x 1 mm (100% scale) Basic information A 26 piece Stegosaurus puzzle kit. You can either test your skill, and assemble it without any help,…
15% infill or more 0.20mm Supports on Scale to preference RECOMMENDED TO SCALE UP A BIT
It works, it is loud, it is now in 4-tones at once! Use at your own discretion. Printed at 0.25mm layer with a 0.4mm nozzle. Use PETG(preferred) or PLA. Make sure you align the Z-seam along one of the valleys between the chambers. See my…
This is a 2-state click button with an internal mechanism similar to that of a retractable pen. This can be used with or without a long M3 bolt to transfer the click action into a secondary linear or rotary motion. Use the case with holes…
DO NOT SELL MY MODEL (PHISICAL INCLUDED). RESPECT THE TIME THAT I CONTRIBUTED TO CREATE THIS MODEL. MODEL UNDER LICENSED UNDER Creative Commons—Attribution—Noncommercial—No Derivatives…
This is a super satisfying fidget with an even more satisfying mechanism Simply print out the 3 parts and assemble them and GET CLICKING!
My remix of the AMS button. I added back the angled part to make it easier to push, still accepts the PTFE tube to protect against wear.
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Keychain eidition of the Funky Skeleton Figure in Hoodie. The model requires a few supports for optimal printing results. I recommend using organic supports for the best outcome. Happy Printing! Patreon, for license:…
Piston Cup, with several artistic changes. It is available in a single file, or in several parts, for an easy support-less print. The different files are organized in folders. If you use it and achieve a full make, please credit me and…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
Made this set of film-accurate (or as film-accurate as I could make them) replicas. The base stones were made to be relatively undamaged. The first time I printed them I ended up sculpting in deeper cracks with a handheld mini engraver…
An articulated dinosaur skeleton with a removable skull. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
A compact and practical 3D printable box opener designed for safely opening cardboard boxes, parcels, and packaging materials. This compact box opener is a practical everyday tool designed for quickly and safely opening cardboard boxes…
Beautiful designer organizer for cotton pads and sticks.
The Cotton War – Organizer for Cotton Pads and Q-tips Print settings (no multicolor needed) : Nozzle: 0.4mm Layer height : 0.2mm with adaptavive layer height Infill : 5% grid Wall loops: 2 Supports: Tree (auto) only needed for characters…
Behold the majestic loaf, the feline monarch of indifference, the absolute unit: Lord Chonkington the Unimpressed. This hilariously rotund kitty is equal parts adorable and apathetic, with more rolls than a bakery and a gaze that silently…
This is a movable dragon skeleton that is printed in place. You need good bed adhesion. It has also been tested with edge and it comes off beautifully. Happy printing! I used Elegoo Filament Red. 3D Printing Settings Edge: No Supports: No…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
An articulated Mosasaurus skeleton. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
I designed this print in place button as a challenge, to see what was a good way to do it with 3D printing. It turned out more fidgety than I thought :) The button prints in less than 30 min and its pretty addictive to play with. Have fun!
3D print that makes your princess smile can you imagine having a Louis Vuitton 3d printed bag! https://youtube.com/shorts/QiX06X8ADd0?feature=share Excellent TEST printing ...which makes you understand your printer better! easy to print…
Beautiful low poly designer bowl that almost looks like a cracked stone. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
Glue “Hand” and “Piston” Screw Hand and Base with 2 “Screw M8 x 25” Glue the "Plate" (mine is personalised) 2 version of the “Base” : Full Empty with “Hood” (10x2mm magnet) to hide object Update v2 : more tolerance for the screw
Two versions of heads: glowing but you must use electric candle - 2. not glowing but you must change colors or print in white and paint Please let me know your experience.
Join here to get access: https://www.patreon.com/kogi3d Print in Place Fully Articulated Skeleton Foot License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any…
About the Project: About the Frames In my video I talk in detail about the design process, but here I also wanted to add something about the suitable filaments. The truth is that you can 3D print those frames from almost any rigid enough…
ℹ All my 3mf files are coming with pre painted Supports for the Head! ℹ Yes it can stand! ℹ Tips for printing: Filament: PLA Supports: Yes! Only for the head!! Layer height: 0.16mm Wall loops: 3 Infill: 15% Seam position: back Wall…
This fidget toy is based on a common toggle switch mechanism. Assembly requires no hardware. https://youtu.be/zfiyeE8l3-0 https://youtu.be/0txw6uiIqhg https://youtu.be/lhFLaZz_SOo Printing All parts can be printed without supports. Print…
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
The wheelie bin has a working lid that opens and closes smoothly. The two wheels are fully functional and can rotate around their axle. The wheels, including their axles, are printed together with the bin (print-in-place) to simplify…
The arm file is a 3mf that modifies the arm joint by adding a negative sphere body to make it attach better to the torso. You will need a slicer like PrusaSlicer that supports this. I've also attached a head and face insert that may need…
Stone Wall This is my rural stone wall. It is intended for the 28mm scale and each segment is roughly 10cm (4 inches) long. There are four different segments right now but more are planned. Please comment if you have any suggestions.…
Please refer to the main entry for complete descriptions and credits. The list of CRxxxx holders were split out from the main entry to facilitate search and download. Holder Label Capacity / Size 1x1 2x1 CR123A 4 8 CR2 5 10 CR927 24 46…
An articulated dinosaur skeleton with removable skulls. Added a smaller skull. Easy to print and should not need supports. Do not recommend printing any smaller than the default . Print with 2 or 3 walls @.16 layer height.
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
