Counting matching models…
A playful and discreet container designed with chill vibes in mind. Smooth, minimal, and character-filled, this little stash buddy keeps your goods hidden while bringing a touch of humor and personality to your shelf. Perfect for those…
Easy and simple stoner's ashtray. For tobacco use only.
A blank, matte-white model of a super chill, red-eyed stoner cat. This DIY collectible captures laid-back feline energy in a smooth, minimal form—perfect for painting your own relaxed, spaced-out kitty with style and personality.
A blank, matte-white model of a spaced-out alien just vibing through the cosmos. This DIY collectible blends chill extraterrestrial energy with a smooth, minimal form—perfect for creative painting and fans of high-flying intergalactic…
Introduction This is a locket which can hold two pictures which are created by toner transfer onto a 3D printed base. The pictures are fixed without using glue and can easily be swapped. Printing Instructions All the pieces can be printed…
Note: I added a customizable OpenSCAD file for the round keycaps. This is my first ever attempt at OpenSCAD, so there are probably some bugs and until now no input checks. I have also a hard time naming variables, so they are not all…
My take on the Stoner Unicorn card from Unstable Unicorns. If i see that it is popular, will do more :) Print instructions Model prints with supports at the tail end and at the front covering the chin, both elbows and the bottom of the…
remix of Stoner's Ashtray replacable screw tip for better ash remove and if ash is hot and tip was melted you priit just tip not all the ashtray
When you're sitting stoned at the computer... I don't know why, but I made a pipe for my 14mm bong glass heads. Normally I would throw the design in the garbage can now... but in fancy filament and fuzzy skin it doesn't look bad at all...…
Cone tip and a curved cone tip. No supports needed, really… you can if you want. it printed the overhang functionally enough that i dont have an issue screwing them off and on.
RASTA-BART-STONER - WALL ART
Mixture of a few files found here on Printables into one ultimate Ashtray. Photos to come. Printed with basic settings on BAMBULAB P1S, it came out just fine.
50 mm Pin-back button for toner transfer or stickers. Category: Accessories
This set is very much inspired by Riskable , main difference is support for dust-proof stem and flat profile. Flat profile allows easier toner transfering, you can find template and jig for the transfer process. Tutorial for toner…
This is a simple, friction fit, barrel lock for both the Classic Army and Ares Stoner 96 LMG AEGs. Maybe you're one of those that accidentally released your barrel in the middle of a game? Here ya go. Again, just a friction fit and it…
enjoy doing smash plantains !, jejeje everythign is possible with 3d Printing I printed it in PLA to test it, but is better in PETG or ABS more heat resistent. NOTE: I printed it in two different sheet because the firts time, that I tried…
Not much to say - I have a Ricoh SP150 laser printer, and a tiny gear in the toner cartridge broke which is used to drive the rollers inside. This is a replacement - but note that this is subjected to some pretty intense forces by the…
Got this idea from Simmelbach (Arduino Chip Reset Ricoh SP213w Toner - Dupont Connector Holder). His holder seemed sort of small and potentially awkward. Also I didn't know if the Dupont connector would maintain enough pressure for good…
As refilling my toner is way cheaper than buying new cartridges, I came up with this little helper. It is just a quick model, and it may be possible to improve, but it's better to refill with it than without it. Printed in PETG with 0.4…
I made a clip for the original box magazine of the Classic Army Stoner 96. The clip allows the internal reservoir ramp to stay at the lowest position while you fill up the box magazine with BBS. Is this necessary? No, but it sure has made…
To use this wheel, you have to remove small part of the plastic to get it in.
Sirve para evitar las rozaduras en las esquinas Hay que pegarla a la esquina, con por ejemplo "PATEX no mas clavos". IMPRESIÓN: Material puede ser PLA. Sin soportes. Tres o cuatro perímetros de pared.
Cantoneres de protecció per una pissarra magnètica
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/7KjiqIYlgdM Category: 3D Printing
Here is a remixed M4 magazine stand configured to hold a Classic Army/Ares Stoner 96 AEG. It's chonky but does the job! No, it does not lock in place like your box magazine does because it simply doesn't have the hardware to do so. The…
Printed on TPU 95A since it needs to be flexible Needs to be printed on a softer material, since the bigger cherries get stuck.
Created from original spare parts. Manufactured and tested.
I recently cracked the tip of my toner, too many tools in the trunk. so I decided to make a protective cap. I was able to salvage the tip for now (crazy glue to the rescue). it works, but it's a little loose on the PCB now and I get some…
I broke a toner container cap, when refill cartridge of my Xerox Phaser 3100. Design a new one. Print it from any semi-flex filament, like SBS, NYLON or hard FLEX. Do not use PLA or ABS, because it's be a difficult to extract rigid cap…
A skeleton stock without the middle parts. I didn't really test this but it should work. Was for a build I never finished.
This is a replacement for the plastic part of a metallic plum destoner. Print in PETG preferably. Designed in Solvespace
Pot Leaf Base Stand for Blazer Big Shot GT 8000. May need scaling +/- 1% depending on your printers tolerances. I would recommend sanding the sharp points on the leaf tips after printing to avoid accidental scratching.
A simple funnel designed for easy refilling of toner or developer powder into printer cartridges. This 3D printed tool helps prevent spills and makes the refilling process cleaner and faster. The funnel fits most standard toner bottles…
I created this box to keep my tools organized in my forklift/part time office at work. It mounts onto the same threads that hold the plastic cover for the windshield wiper motor. You will most likely need a little longer bolts than the…
Bolts onto the inside of the door, using the same holes that the upper hinge uses. Replace them one at a time, to avoid the door falling. The hanger should be flexible enough that you can replace and tighten one bolt without removing the…
Ersatz Schutzgitter für den Visaton DSM 50 FFL Mitteltöner. (Neue Variante damit der dünne Rand nicht verschmilzt)
We mostly have "mirabelles" plum here so I created an adapter for them. My plum stoner is the device there : https://www.amazon.fr/Westmark-40232260-Vide-pommes-Blanc/dp/B0068K9354/?th=1 (not an affiliated link). Photo show mirabelle…
I had a pile of empty toner cartridges from my Konica Minolta printer, so I decided to repurpose them for storing welding electrodes. The extended version of the lid is for longer electrodes that didn't fit inside the cartridge. I…
Made a stash box with a built in rolling tray. The main hinge and the hinge for the latch are both print in place. I used 2 mm by 10 mm magnets for the tray cover and latch. Meet the ultimate weed storage box – it’s like the Swiss Army…
Laser printer toner refill funnel Funnel cap for laserjet toner 40mm cap bottle. HP LJP1005 print horizontal for better sturdiness
Bolts onto the inside of the door, using the same holes that the upper hinge uses. Replace them one at a time, to avoid the door falling. The hanger should be flexible enough that you can replace and tighten one bolt without removing the…
Made a stash box with a built in rolling tray. The main hinge and the hinge for the latch are both print in place. I used 2 mm by 10 mm magnets for the tray cover and latch. Meet the ultimate weed storage box – it’s like the Swiss Army…
I needed a funnel to use for refilling my toner cartridges. It needs to fit my workcentre 3225 and 3025 toners and also the brother TNB023 cartridge which has a narrower fill port so I made this 2-in-1 funnel. This is designed to be…
Funnel for printer toner refill bottles to match hole size in original funnel to usually smaller service holes in toner cardridges. Originally designed for Brother TN-243/247 cheap toner replacement cardridges where service hole is next…
Laser printer toner refill funnel Funnel cap for laserjet toner 40mm cap bottle. HP LJP1005 print horizontal for better sturdiness
simple motor for filter toner vacuum cleaner Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Machine Tools
nozzle for toner vacuum cleaner, angled Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex PET-G Black Notes: speed 35mm/s Category: Hand Tools
nozzle for the hose of the toner vacuum cleaner 32mm and 24mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: НИТ PET-G Black Notes: Speed 50mm/s Bad 70 C Noizze 240 C…
TS-100 soldering iron case. As small as possible. I added the little compartment for the 5 threaded heat inserts. The picture reference for bending the wire(1.25mm). Other sources: The original design is from:…
Add 3 lines to your layout coming from the center of your object going to the left, top and right. Print this cross first, then align and fix your layout. Remove the the cross and print. If your slicer puts everithing in the middle of the…
three-way funnel for toner "Bulat" Трехзаходная воронка для тонера "Булат" Print Settings Printer: Geeetech A30T Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: FD PLAST PETG Category: Other
nice organizer for a rolling tray, brush, dosing capsules for S&B Mighty and much more
