Toner (inductive amp) protective cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I recently cracked the tip of my toner, too many tools in the trunk. so I decided to make a protective cap. I was able…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently cracked the tip of my toner, too many tools in the trunk. so I decided to make a protective cap. I was able to salvage the tip for now (crazy glue to the rescue). it works, but it's a little loose on the PCB now and I get some feedback. SO Stay tuned for a replacement tip "thing" in the near future.
Enjoy
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15%
Filament:
any PLA*
Notes:
sample is in PLA, but will print in ABS due to the fact it will be in my car most of the time.
Category: Electronics