Toner (inductive amp) protective cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently cracked the tip of my toner, too many tools in the trunk. so I decided to make a protective cap. I was able…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently cracked the tip of my toner, too many tools in the trunk. so I decided to make a protective cap. I was able to salvage the tip for now (crazy glue to the rescue). it works, but it's a little loose on the PCB now and I get some feedback. SO Stay tuned for a replacement tip "thing" in the near future.
Enjoy
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15%
Filament:
any PLA*
Notes:
sample is in PLA, but will print in ABS due to the fact it will be in my car most of the time.
Category: Electronics