368 models
We lost a few of the flat marbles and needed replacement. So my daughter and I designed these rounded half spheroids. With an infill they are very light compared to the marbles, so you might consider printing solid or as a whole set - we…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Gigamons / Gigamon card holder and the needed 3 stones in 3D. Print the holder to keep the cards neatly stored in the box. The height of the card holder is such that the cards cannot fall out once the game box is closed. The holder has…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
This a is 3 layer, 3 colour, 3d logo for the legendary ska-punk band The Mighty Mighty Bosstones. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Recommended layer colours (changes built…
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant
Made this set of film-accurate (or as film-accurate as I could make them) replicas. The base stones were made to be relatively undamaged. The first time I printed them I ended up sculpting in deeper cracks with a handheld mini engraver…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
The 4 elemental stones from The Fifth Element movie Tealight candle holders. “Life size” Measures 24cm high so would require a printer capable of printing that high unless you split the model in half and glue together. Would require…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
A 3D printable replica of the famous oof stones meme
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Its a simple door corner with some tombstones and zombie hands to help spooky-ify your home!
With these moulds you can cast the 4 Elemental Stones: representing fire, water, earth and air. Fifth Element is not included. To form the Light of Creation and save the Earth, provide a Supreme Being of your choice 😊 The moulds can be…
Two simpel stones, each halfed, so can be printed without support and glued togheter. I printed this for 3D hubs and therefore unfortunately don't have an photo. The rocks were 3D scanned. The rocks were printed by https://www.mtb3d.com/
Do I really need to explain this logo ? Hope not :) I wanted to make gift for my family and I was not able to find good enough model suitable for three color printing to match original logo : black background, red lips and tongue and…
Just some quick tombstone models I made for a miniature diorama project. These range from 43 to 71mm, but there shouldn't be too much of a problem with scaling them up, or even down (but only a little or you'll lose the details). They are…
Ever heard of Go? It's simple to learn, fun to play, and has pretty much no skill ceiling. Print yourself a set and have some fun! No supports are required for any parts, and the board will fit on an Ender 3 Pro's print bed (but just…
"Super Green." — Ruby Rhod.
Elden ring message stone with printed messages underneath. STLs included: -Message stones with blank base -Message stones -Elden Ring logo -"Time for Elden Ring" -"Could this be a dog?" -"Try fingers but hole" -"Dog ahead" -"Rump ahead…
stepping stones for zen garden roughly 15mm
The Infinity Stones are fictional items in the Marvel Cinematic Universe (MCU) media franchise, based on the Infinity Gems of the Marvel Comics. As expounded across several interwoven MCU multimedia titles, the six Infinity Stones are…
Dino the Dinosaur: The Flintstones
I'm a big fan of Patrick Rothfuss' Kingkiller Chronicles series of novels, and in them he introduces a game called Tak - an abstract strategy game in the vein of Chess, or Go. This game was later created by James Ernst and Patrick…
Update 29 jul 2022: Made the hole in the stone holder bigger so that the stick attaches easier. Prerequisites: To 10 mm M5 screws with two hex nuts Print with 2 mm walls/top/bottom for stability and with no support. 150_5_20.3mf: For…
The Flintstones Logo. This logo can be used along with all my previous Flintstones models to create a complete display. The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately…
If you print the model and show it off, please tag me on Instagram: @ca.lu_creation These are custome designed bases for the amazingly modeled "Elemental Stones" by Imirnman from the movie "The 5th Element":…
Update 12.08.2025: Added Pillars in 50mm, 60mm, 80mm, and 90mm NOTE: The “Pillars height” is not its actual height, but the total height of the tower you get using it. Example: Base + Pillar50 + Head (Another Base) has a total Height of…
Simple t-nut stones for 20x20 an 30x30 profile. It snaps into place Print Settings Printer: primacreator Rafts: No Supports: No Resolution: 0.15 Infill: as you wish Filament: no special brand all whatever fits Category: 3D Printer Parts
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
Square Stones - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. It has a 1 inch grid for D&D. Available as full tile, half tile, quarter tile and corner tile. Additional quarter tile with integrated water well, and…
Moved some parts from @marsf_1338819 and removed fillets to fit 1 more keystone Keystone are on the Right, but could make a Left version if requested. Should fit in any 10 inch rack that has at least 213mm inside spacing
I got this design off of thingiverse and I created a case for it on tinkercad. If you want it to be a necklace or bracelet shrinking the size down is recommended.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A ring made in two parts A light frame ring, and Exchangeable Stone Face. Stones that you can remix, create or just print Made with SLA in mind but the frame and some faces can be FFF as well Printing and Sizing instructions: Original…
Remix with minor fixes to NewProggie's JetKVM mount with 8 keystone modules.
Miniature model Curling Stones. Couldn't' resist this design after watching this in the Winter Olympics. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 50-100 Notes: I printed the base stone itself in Bronzefil at 100%…
Its the Rolling Stones logo no more
Need some cool objective markers in a graveyard setting? I made a set for your fantasy table that really punches it up a notch! This set is a set of headstones, with optional numbers to use for marking important locations. If you like…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found these cute tombstones, perfect for a Halloween wreath. I printed them with supports and finished it with a little bit of acrylic paint. Thank…
Kameny z filmu Pátý element - dekorace K nalepení použijte oboustranou pásku, nebo kapku silikonového lepidla. Stones from the movie The Fifth Element - decoration Use double-sided tape or a drop of silicone glue to stick.
Welcome to the LINT-stones car, the latest addition to my garage! This prehistoric beauty is a 3D printed masterpiece, complete with all the stone-age style and charm you'd expect from a Flintstones vehicle. But what really makes this car…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A bunch of different headstone designs with little decorative flourishes on them. They look great if you emboss text on them too.
A storage box to store 160mm sharpening stones mounted to aluminum backs. This box comfortably fits my stones without them being snug, but yours may be different, and printer tolerances will make a difference. Models are included for 5 or…
EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…
Old wind instrument, enjoy listening to up to 12 different tones, blow quickly from side to side to produce a hoarse to shrill sequence. It is recommended to print it upwards so that the blowing area is well, but if you have good…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
Deftones White Pony logo decoration Part of my new series of band logo home decorations that can stand on their own, perfect for displaying on a desk or a shelf! Dimensions: 177mm w x 192 mm h x 16mm d (can be scaled up or down) Filament:…
A few simple gravestones. Category: Props
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
I wanted this for my office and whipped it up. If you use a light strip with a thin enough battery box (like a button battery) you can glue some lights to the back of it like I did. The lights may show through the front depending on your…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hey here is selection of scatter terrain perfect for any mystical or magical plane. This set is printable in resin and PLA. If you're interested in more of our models check out our MyMiniFactory here https://linktr.ee/krakulu !! DONT MISS…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The two Kinstone pieces fit perfectly! Maybe something good will happen! All kinstones have been created with a .3 tolerance cut so you shouldn't have trouble finding your match.
Doing a Marvel Snap tournament at work and wanted to make a cool trophy. I'm not a modeler, but I hollowed out the model and removed the stones. Each stone diffuser has a single WS2812B glued to it and everything is wired up to a ESP8266…
An attempt to add 5 keystones instead of fixed USB front panel. 2025.09.04: Fixed keystone alignment. Please re-download! Sorry for the trouble.
This is a 10" rackmount for keystones as well as separate accompanying panels for labelling said Keystones. The label strip can be placed above or below the Keystone panel. Required hardware: Screws and cage nuts that came with your…
Small and simple grindstone holders for Tormek stones. There are 3 different versions: 250mm: high: 140x120x30 mm 94g / 20% low: 139.4x110x25 mm 79g / 20% 200mm: low: 120x100x25 mm 59g / 20% The original version is the high profile…
Use brim, no supports. The Sensory Stones are a set of 6 handheld sensory stones , each featuring a different tactile texture designed to explore and fidget with using your fingers. Each stone has the same pattern represented in two…
Anxiety & Stress Relief Sensory Stones – Set of Four 🤍🪨🌿✨ Palm stones for relaxation, focus, anxiety relief, or simply as a satisfying tactile object to hold and explore. Set Includes: 4 unique sensory worry stones Size: Hand/pocket size…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
repuesto de los botones del teclado musical Korg x5d o M1
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of the original base for Dycus' Ocarina of Time Spiritual Stones. The base was cut into individual pieces for each stone and the total area reduced to use less filament as well as fit in smaller spaces. The prints from the…
Some wall mounts to be able to display the stones by Imirnman from https://www.thingiverse.com/thing:1012118to: Prints without supports, if you have good bridging settings, having the slot for the stones facing the build plate. So that…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
fun game named gonggi! known from the show ‘squid game’
Please check the size before printing so they fit your purpose Not much to say about them. I made them for cosplay but you can use them however you want.
I needed a box that would fit 8 diamond sharpening stones for Ruixin. I think these should also fit Edge Pro. Fits stones up to 165mm length, 24mm width and 9mm thick. Fusion model is attached; there you can theoretically modify these…
Those are files for Orapa Mine board game 3d board and blocks. Components: these are for original game(2 player) components. If you need more or less you can fix it Original 2 Mine Board 2 White Triangle 2 White Diamond 2 Red Gemstone 2…
The box is based on my parametric “ Rugged Box ” and holds up to three DMT 6" diamond whetstones and the holder you can find here: https://www.printables.com/model/610107-dmt-6-diamond-whetstone-holder Support my work For non-Prusa parts…
Replacement buttons for Pebble 2. The deterioration of the original rubber or silicone is usual. This is a replacement made in PLA. Botones de repuesto para Pebble 2. Es habitual el deterioro de la goma o silicona original. Este es un…
Just a basic bone
DIY - Keychain Jewelry/jewellery Charm. - Print loads of the beads (I do three at a time) - Thread beads through string - Attach to keyring with a slipknot. - Tie knot at other end to secure Two hole sizes available, 3mm and 5mm. If you…
They can be useful for integrating into other multi-piece designs and joining pieces together.
Remix of @DevineJimmi ‘s 10 inch ER605 rack mount , I’ve added a couple of keystones to help with routing WAN etc in my mini rack. Removed the text too to make it easier to print for me (hope that's ok, please check out the original!)…
Super simple holder for your sharpening stones. Just print and use. I bought a one meter long 12mm stainless steel threaded rod to use with my holder.
Make your TTRPG table pop with these ritual stones! Mystical, magical, mysterious stone formations that your party can investigate. Other Models by CCG_Brian Carved Runestone Skull Dice Display Forest Swamp Bases Character Nameplate…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is basically a “Fifth Element" stones skin for the square twist lock box . I didn't print them yet, thus only a simple render is shown, but in the second image you can see how the square twist lock box looks. The left one is printed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I create a Remix of @Tysonpower work, to get a small onen Category: Computer
The Flintstones Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Thomb Stones for my N Guage Model Railway Church scene
Hey, I coulndt find the real gonggi stones here, so I made them by myself. The main difference is, that these stones should be filled with something like sand so the center of gavity is lower and the stones can land easily on your hands.…
A ring made in two parts A light frame ring, and Exchangeable Stone Face. Stones that you can remix, create or just print Printing and Sizing instructions: Original Ring is size 5.5 Find you ring size in the chart ----->> bellow the ring…
Design is print in place and is working with all lenghts of översidan
SEVEN STONES Throughout history and in many different cultures and religions, the number 7 is more than just a number by faith. In this mystical, turn-based game, this extraordinary number is honored. A game app with the name "Sevn"…
Print with 3-4 shells and without infill / supports for the best optic effect. Examples were printed in beautiful transparent PLA from diamondage.co.nz Category: Coins & Badges
Here lies Hotend Harry, Nozzle Neal and Extruder Earl, Three former nonfictional characters from hobbys' past who enjoyed this hobby maybe a tad too much and had their demise accordingly. Folklore has it that they continue to haunt makers…
Entry level puzzle inspired by element stones from “5-th element”
Drop in replacement for the Flat Mesh Skirts when you use the keystones in the back. When opening the file in your slicer, split the parts. For the inner part apply the following modifiers: Top Solid Layers: 0 Bottom Solid Layers: 0…
Stonehenge-like stones in 1/87 (H0) or 1/100 scale. Best print it on a raft. I tried to print them lying on the flat side and standing. I think standing works better because it looks much better afterwards. Modeled in blender via Subsurf…
A ring made in two parts A light frame ring, and Exchangeable Stone Face. Stones that you can remix, create or just print Made with SLA in mind but the frame and some faces can be FFF as well Printing and Sizing instructions: Original…
Remix of model by @Ajoli_112854 which adds two keystones. Find original here: https://www.printables.com/model/1268653-10-rackmount-ubiquiti-unifi-express-7-router-stand
The gravestone is a 20mm wide, 12mm thick, and 33mm tall. The tall gravestone is 34mm wide, 23mm thick, and 39mm tall. I printed it in 20% infill with no supports or adhesion.
These are the Meadow tiles I created to be used with our baseplates . The tiles are intended to be used with grass-flock. You could just paint the grass-part green, but the effect of the stepping stones in a lawn is best achieved if you…
![[RE-REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max | 3 Keystones](https://media.printables.com/media/prints/adc6ccdc-6eff-4ddd-ac0f-4e95ccabe13a/images/9627747_37c38b0b-0449-4e4c-bd06-d9ab1999649f_1fc4f0c2-020e-40a5-b818-cb80370ed233/pxl_20250420_201749755.jpg)
