1 / 7
Marble run - Base Tile & Elevation System (Height stones) (Gravitrax compatible)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
(Work In Progress) Inspired by JDO Solutions, I designed my own elevation system.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 440
- Makes
- 8
- Views
- 2,097
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 12.08.2025:
- Added Pillars in 50mm, 60mm, 80mm, and 90mm
- NOTE: The “Pillars height” is not its actual height, but the total height of the tower you get using it. Example: Base + Pillar50 + Head (Another Base) has a total Height of 50mm
Update 15.02.2023:
- Added a blind_plug.stl to close unused entrances. This is sometimes required for elements like this funnel
Update 13.02.2023:
- Fixed missing stabilizer elements in Balcony_B
- Added simple Base Tile in 5mm and 10mm. - May get used as simple height stone as well
Update 12.02.2023:
- Improved the Balcony System.
- Added a second balcony variant - you can clip balconys all around the hexagon now.
- Use 2 balcony clips to increase stability.
- Balcony clips are comaptible to my grid system and thus can be extended to bridges or plates.
- Added a few more pillar sizes up to 24mm
Compatibility
- Gravitrax ( incl. Green insets with inset adapter)
- JDO Solutions Insets
- JDO Solutions Elevation System
- All other custom Insets that use the original dimensions
- My Bridges, Platforms and height stones as well as all my other marble run designs
Differences to existing solutions
- Like all my marble run designs, the connectors are tighter to ensure a good and stable connection between all parts.
- Easy print without support or gluing (special connector design)
- Compatible with all kinds of insets (there are adapters)
- Option to attach balconies
- Tighter connection to rail elements.
- Can be printed in 0.3mm DRAFT without any isssues.
- Print 3 Pillars, Base Tile, Connector and a head element and simply push everything together. There should be a tight fit.
Note:
I am in no way affiliated with Ravensburger or Gravitrax. All parts are my own (derived) creations and serve a purpose or function that the original parts can not. However, they are compatible with most Gravitrax components or alternative Gravitrax-like marble run models. I do this purely as a hobby with no intention of making a profit.