1 / 7
Marble run - Base Tile & Elevation System (Height stones) (Gravitrax compatible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(Work In Progress) Inspired by JDO Solutions, I designed my own elevation system.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 440
- Wydruki
- 8
- Wyświetlenia
- 2097
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 8) (Komentarze: 16)Remiksy (2)Kolekcje (111)Powiązane
Update 12.08.2025:
- Added Pillars in 50mm, 60mm, 80mm, and 90mm
- NOTE: The “Pillars height” is not its actual height, but the total height of the tower you get using it. Example: Base + Pillar50 + Head (Another Base) has a total Height of 50mm
Update 15.02.2023:
- Added a blind_plug.stl to close unused entrances. This is sometimes required for elements like this funnel
Update 13.02.2023:
- Fixed missing stabilizer elements in Balcony_B
- Added simple Base Tile in 5mm and 10mm. - May get used as simple height stone as well
Update 12.02.2023:
- Improved the Balcony System.
- Added a second balcony variant - you can clip balconys all around the hexagon now.
- Use 2 balcony clips to increase stability.
- Balcony clips are comaptible to my grid system and thus can be extended to bridges or plates.
- Added a few more pillar sizes up to 24mm
Compatibility
- Gravitrax ( incl. Green insets with inset adapter)
- JDO Solutions Insets
- JDO Solutions Elevation System
- All other custom Insets that use the original dimensions
- My Bridges, Platforms and height stones as well as all my other marble run designs
Differences to existing solutions
- Like all my marble run designs, the connectors are tighter to ensure a good and stable connection between all parts.
- Easy print without support or gluing (special connector design)
- Compatible with all kinds of insets (there are adapters)
- Option to attach balconies
- Tighter connection to rail elements.
- Can be printed in 0.3mm DRAFT without any isssues.
- Print 3 Pillars, Base Tile, Connector and a head element and simply push everything together. There should be a tight fit.
Note:
I am in no way affiliated with Ravensburger or Gravitrax. All parts are my own (derived) creations and serve a purpose or function that the original parts can not. However, they are compatible with most Gravitrax components or alternative Gravitrax-like marble run models. I do this purely as a hobby with no intention of making a profit.