337 models
This snacking tongs will keep your hands and fingers clean while enjoying a bag of cheese puffs, chips or any other bite sized snacks. Requires no effort to keep it in between your fingers. UPDATE - added flat profile version per…
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…
These snacking tongs allow you to enjoy snacks without getting your fingers dirty, enabling you to work and play without interference. The 3D model is designed for maximum ergonomics, with all edges rounded off. Additionally, if you have…
Print Z=0,2 perimeter=5 infill=50
Instead of buying kitchen tongs from the store, make use of your 3d printer and the forks you already have. Print instructions No supports needed. Just use a brim.
🐶 Dog-Head Bookmarks Collection – Tongue Out Edition Make reading more playful (and a little sillier) with this collection of stylized dog-head bookmarks — each one peeking out with its tongue out and a whole lot of personality 😛🐾 Each…
TongsNow is a kitchen gadget designed to transform regular cutlery into handy tongs. This 3D-printed accessory easily attaches to any standard cutlery, making it a versatile tool for a minimalist kitchen. Its adaptable design allows it to…
Recommended to me by a dental hygienist many years ago, just run one of these over your tongue to scrape away bacteria that lead to bad breath. (Don't forget to brush and floss too). Only takes 34 minutes to print at 0.2mm layer height…
Car trailer with ramp. Connect the trailer by tilting it in an angle from above. Wheels and hinges fit for 1.2 mm nails with a snug fit - no glue needed. STL split into 3 files for easy separate slicing.
Travel tongue scraper Scraper for a few uses, when you travel, you can throw it away and print a new one at home. After printing, pay particular attention to the adjustment of the blade - when I set the layer height to 0.15 or 0,2 mm, the…
I needed a way to transfer 1" chlorine tablets from the bulk container into our pool floater without using bare hands or using up my gloves. I designed these tongs with a large enough opening to grab the tablets and they're thick enough…
These tongues were designed for fursuits and puppets. Print them with flexible materials - like TPU. You can use Cura's Fuzzy Skin setting to make the surface more realistic. Print Settings Printer: Alfawise U10 Rafts: No Supports: No…
Do I really need to explain this logo ? Hope not :) I wanted to make gift for my family and I was not able to find good enough model suitable for three color printing to match original logo : black background, red lips and tongue and…
chips tongs for eating potato chips Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.16mm Infill: 100% Filament: PRIMA PLA black Notes: when I printed it it came of the bed so raft should…
Honey Comb Wall I wanted a super sturdy honey comb wall (HCW) with very secure mounts. This HCW can be screwed to a wall and panels can be epoxied together. Built on 30mm hexagons. Mods are screwed together and not press fit. They are…
Material: NiceBio von 3DJake Gute thermische, mechanische Eigenschaften, spülmaschinenfest und biologisch abbaubar. / Good thermal and mechanical properties, dishwasher safe and biodegradable.…
mount for gopro for handlebar
A toaster tong...what more can I say. PETG is probably the wise move here. But a lot of filaments should work. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 20 Filament: SUNLU PETG Category:…
Have a candy jar at work but don't want everybody use their fingers. Print instructions Category: Kitchen & Dining
Tongs for handling printing paper during processing in trays. Available both with and without text. Text options: Developer Dev Stop Fixer Fix Have tested and they work great!
The sandballs will have a diameter from 55mm. Models: Ball Cube Multi Sided Cube Print this model 2 times and combine them with a 5mm bolt. Have Fun :-)
Hola :) Para armarlo solo necesitarás un cautín o taladro para hacer los agujeros e introducir la pieza que funcionará como bisagra, estos entraran perfectamente, te recomiendo que le pongas una gotita de kolaloka para unir la bisagra y…
My children are know for sticking their dirty hands in a community bag of chips. My wife bought 2 of these online and decided to design my own and share. There are 2 different versions. V3 has reinforced end and tougher to squeeze and v4…
A mother cat can lick a kitten. Put the product in your mouth and pat the cat. Thank you. ps. There are contents on my blog that play with 3D printed cat toys. https://blog.naver.com/waelkka/223086148553…
Tongs to avoid touching the fish while removing the hook. Your hands will not smell like fish.
I lost the original ones while moving out so I tried printing them. I also modeled stronger bases depending on the orientation you want to place the lamp.
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/190120 The print settings in the print profiles have been tested. PLA prints in 16 minutes & PETG in 18 minutes. ==== Protect…
Serving stand for laying out four hot toasts and tongs for removing hot toast from the toaster. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15 Filament: SUNLU PLA Category:…
I wanted a nice compact location to hang all of my oddly shaped pliers. I made two models with variation of 5mm and 10mm slots that the pliers slide into. It seemed to work out fairly well. Model A: 3 x 5mm slots + 4 x 10mm slots Model B:…
Simple Foldable Print in Place Stand for anything you may need it for Remixed for exceptional strength and durabilty while maintaining the size and funtion of the original. Printed in PETG with no supports
I designed these so I could clean my sons bearded dragon pen. Print on the side using supports on buildplate only.
A 3d printable tongue cleaner. I use it every day. Use the attached .3mf to print with extra strength (uses Prusa slicer and mod cubes for extra infill)
Welcome to Rapa Nui! This model was created by MiniWorld3D member Artemio García (@artemiogj) . Easter Island , a Chilean territory, is a remote volcanic island in Polynesia. Its native name is Rapa Nui . It’s famed for archaeological…
This tool is based on my favorite trash pick up tool that is basically just an extra long set of tongs. It does well at picking up a variety of item sizes. To try to maximize strength and rigidity this is not a print in place model. Print…
This adorable little frog is not only a fun and unique accessory for your keys, but it also has a special feature. With just a gentle push, the frog's little tongue will pop out, adding an element of surprise and playfulness to your…
To make the model a bit lighter and more flexible, turn off gap filling in your slicer profile. In PrusaSlicer, this is found under Layers and perimeters > Advanced > Fill Gaps
Bought some filament of XINGTONGZHILIAN. The spools have a diameter of 18.3 cm and are wound up to the upper edge which causes an issue when the AMS rewinds the filament (filament jumps from the spool). Existing designs waste to much…
Use these hooks to hang up your meat for making Biltong (Beef Jerky)
Simple yet very functional tongs to get pickles out of the jar. Gently squeeze the branches together to grab stuff; it works very well when printed in PETG, with just the right amount of grip and elasticity. The tongs come back in place…
Hanger for clothes and something else. It can be resized for your purposes.
The Kids broke some tongs from a gripping game. thanks to the 3D Printer there was a new set coming in quickly. Theese are Kids Toy tweezers / tongs, what else is there to say. dimensions 10cm x 2,2cm supportless ezy and quick print.
With this project I recycled early prototypes of my bayonet blade from the HEMA musket project. It is modeled after original 1800s british musket bayonets with an enlonguedback portion to reach a Length of 60cm. Print the blade from TPU…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs I am proud to present my most intricate model yet: the Tongue Depressor prop for clinical simulation. This model…
Print 100% infill. Measured existing buckle and tongue from my cheapo kids watch and designed this. The picture shows only a replaced buckle and not the tongue, but I've tested the tongue as well (just don't have a picture). How I…
Screwdrivers holder with places for: popular jewellers 11piece screwdriver set 14 screwdrivers with max 4.1mm diameter 2 screwdrivers with max 7.9mm diameter Tongs holder with place for: 8 small tongs 2 bigger tongs 1 pair of scissors
This is a meat dryer. The biltong process needs a bug free environment with a constant airflow that dries the cured meat during the process. Print instructions BOM 1pc DC fan (standard 90mm from a PC PSU) 1pc DC power supply for the fan…
Nice for servicing Cold food, Cakes etc., Built it using PLA @ 15% Infill and 0.15mm Quality and set the support to: Everywhere. Attached are GCODE and STL files. Made of 2 parts, Left and Right. For hardware I used: One M4X20 Pan Head…
https://www.oxo.com/12-tongs-619.html
No job too big or too small for these totally unnecessary tiny helping hands. Suggested by a colleague, convinced the idea will make him rich beyond his wildest dreams, he has a big plan to expand the range and make these tiny little duke…
EN: Simple rack for setting up pliers readily to hand Filament: PLA Layers: 0.3 Supports: no see: https://www.printables.com/de/model/809017-pliers-tong-holder-frame-stand-big DE: Einfaches Gestell zum griffbereiten aufstellen von Zangen…
Human Tongue Menschliche Zunge Variation 01
Bambu Build Plate Holder with 6 tapered slots DOUBLE tongue
This is a ice tong using the fin ray effect to get a better grip on the ice cubes and ice balls. Update 23.12.2021: fixed some minor errors in the fin ray file. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No…
Wall-mounted tongue depressor dispenser. Mounts to the wall with command-strips. There is tolerance on the inside to glue a thin piece of clear plastic so that the supply of depressors can be viewed without leaving them exposed. Dispenser…
An adaptor to convert the Go-Pro Three-Tongued Connection to the Quick Release Buckle Adapter. I could not find one of these anywhere so I made one. I found using the Go-Pro on the selfie stick with the Three-Tongued connector limiting…
Porte feutre complet pour 220 pieces ou 110 piece si on imprime qu'un cote. Aucun support necessaire Mais faut mettre une plaque ou un fond carton, bois
my kids broke their play bbq tongs, so here are the new ones...
Szczypce do wyciągania oliwek ze słoika. Wydrukowany z HIPSX, może mieć kontakt z żywnością i być myty w zmywarce. Zamieniłem plik na poprawny. Poprzedni był omyłkowo z oliwką :-) Print instructions Unassociated tags: olive tongs,…
https://www.oxo.com/oxo-gg-9-22-5cm-locking-tongs-w-nylon-head.html?gclid=CjwKCAiAjrarBhAWEiwA2qWdCBkAKjVveNhWKr5IB8E0I1
Inspired heavily by Bluetopia's shaker motor case, but designed to accommodate a larger shaker motor, specifically this one: BestTong DC 12V-24V 8000RPM 775 Brushed Vibration Motor DOUBLE-HEAD High Torque Electric Vibrating Motors with 2…
Printed using 0.1mm layer height and PETG. No supports required. Might require a knife to help splitting the hinges a little.
i remixed this so i could print the tong s in plastic. and so i could change the tong to any type i want. i included step files so u can modify it to your liking. i printed my tongs with fast honeycomb internal infill pattern, at 20%…
This is a special print for me. It is designed after a woodshop project when I was in middle school. Over 35 years ago. We took a piece of would and used a drill press, bandsaw, and drum sander to make this. In middle school. Used to let…
The Dragon Tongue - can be screwed to the Trianglelab Dragon Hotend V2.0 and used in the place of a standard E3D prusa V6. The adapter allows one handed nozzle changing due to the Y-shaped "tongue" that fits the extruder cover shape and…
I took off the top layers on the “middle bit” and selected a sparse infill pattern of Honeycomb in Bambu Studio. I didn't want it completely hollow to the bottom, as I want to use it to dry after cleaning the glue off the bed, so the…
Print in black and red for white walls. Feel free to adjust to your size. Print Settings Printer: Bibo Rafts: No Supports: No Resolution: 0.2 Filament: Sunlu PLA+ Red and Black Category: 2D Art
This model is compatible with the lego system.
An adapter to make a tong from any desired utensil (spoon/fork/…) Print needs supports. Scale as needed for your utensils. You might want to use other filaments to suit your use case (heat-resistant/foodsafe/…)
Print flat. Use a food safe filament. PLA is not dishwasher safe….
I tried a bunch of repair flip flop but they never feet with commun flip flop or robust enough. So I did mine, all my friends are crazy about it. I printed in petg for the heat in my caribéen island and therefor I can keep some in my car…
(EN) 0.2 layer without supports. (CZ) 0.2 vrstva bez podpěr.
Don't make a mess and get your hands dirty! This awesome mini appliance has got you covered... in style! "It's the best handeling tong ever!" - French Fries w/ Ketchup Magazine "Please don't let AI evolve! They've conquered the world!" Me…
This is a storage box for the tongue of the Traxxas trailer for the TRX4m. It should fit on the tongue where indicated by picture four, without need for trimming or adhesive. I will print this soon, and update this listing as soon as I…
I created these to make it less messy and easier to get in to right spaces where my fingers couldn't fit. They are for adding grease to the solid rods that various parts travel on. My delta printer uses 8mm rods and that's what I designed…
This are Jaws for 300mm Knipex Tongs (87 01 300). these are for assembling and disassembling a syphon. Just print it out and glue the TPU piece in the 10mm holes. You also can use some 10mm round Rubber to make it grip nicely. The…
ENG Do not do it like a caveman and take the sugar cubes out of the can with your bare hand print a pair of tongs! Of course, the tongs can also be used for other purposes. When using in contact with food please pay attention to the…
I stumbled upon a cheap PLA+ (always either cheap or pricier but with 30% off) on amazon.de which did not fit the AMS unit. I absolutely LOVE this filament at that price point. Prints perfectly fine on Prusa MK2.5, Elegoo Neptune 3 and…
This is a flexible tongue. Inspired from the tongue guy from the metal band. Needs a bit of glue. Tongue has a snapping mechanism but also needs a little glue. The eyeL, eyeR, teeth and front can be printed together in white. The tongue…
Toaster tongs. Printed in abs. 20% infill. 1 hr 15 min print. Idea is to grab the stuck toast with the tongs, near the middle of the tongs - teeth can be used to retrieve broken pieces.
These models are a replica of the famous Youngle Tongbao, a Ming Dynasty-era Chinese coin. The original coin was minted from 1408 to 1424. The obverse of the coin contains the characters 永樂通寶 and the reverse is blank. The download…
Español Tomé inspiración del diseño de Leen15 , pero los carretes Sunlu son muy diferentes de la marca china que suelo utilizar, por lo que diseñé los míos. El sistema cuenta con juntas modulares que permiten apilar tantos carretes como…
this is to carry frozen fish food balls from the freezer to the fish tank and dropping it in. cuz i hate grabbing it with my hands . *beefed it up a bit. Category: Pets
Who needs easy and boring equipment? I designed this piece of fine BBQ equipment so you can build your own pliers! Simply print this design and add 2 pieces of wood and 4 x M4 Screws + Nuts & washers to it. I used some oak but you might…
Created out of a hate of trying to fish power cords from behind the washing machine and dryer. I've made the socket hole not a snug fit so I could put blu-tack in behind it to hold it in place. Enjoy! Category: Household Supplies
In case this micro cylinder (2.8mm diameter) breaks when installing, doesn't matter actually. Recommend 100 % filling density, otherwise the tongue breaks again.
Written in OpenSCAD + BOSL2, so fully customizable: width, thickness on both ends, the geometry of joint (influences springiness) and of the teeth (width and length) There is a million 3d-models of tweezers here, but none of them has the…
I was tired of the tongs springing open just when going to close the drawer :). A360 view https://a360.co/2QIDXh4 https://a360.co/2MK5WJO Print instructions Category: Kitchen & Dining
The retaining clip on my tongs broke, so I printed a new one. The dimensions are customizable in the OpenSCAD model.
These are ring tongs that can be used for many purposes. The first reason for modeling was to design curtains to be installed inside the vehicle. I was thinking about curtain clips for moving a 20mm stainless steel pipe. Through several…
Long tongue skeleton monster halloween
Prints fast grabs sugar
I designed this as my chest of draws get abuse from my family. It is a repeated problem that the drawer guide brackets keep snapping. I decided to design my own bracket with a stronger structure to withstand daily use. Print Settings…
Don't use your hands, that's unsanitary! Instead, use these tongs! :) I recommend brim for the tongs (maybe also the holder, depending on your printer.). I used superglue to attach it to the roll-top snackbox. Snackbox in the image is…
