302 models
Introducing: My 3D Model Radiator Hook Have you ever found yourself in a situation where you needed to hang an umbrella or some clothing on your radiator, but couldn't find a suitable place? The solution is here! My own 3D modeled hook is…
beautiful Cake Topper download .just for you.
Háček do koupelny na topení.
This is a tool for the home services. This model is prepare for a heater vent repair. Size of the square inside is 5x5 mm. Printing: Is it better to print it from PETG or ABS in laying down positionto make the tool stronger. For the print…
A while back I had made up an organizer for some auto-injector pens that required gluing together. My originals were still working fine to this day, but I wanted to remake it using Fusion instead of Tinkercad to see what I could do with…
Ztratil jsem originální klíček na odvzdušňování topení. Dělat to šroubovákem je opruz. Proto jsem udělal tento rychlý model. Moc krásy to nepobralo, ale funkční to je. Pokud jsou odvzdušňováky v pořádku a nejsou dorvaný na krev, tak plně…
what do i have to say its nice DOOR STOPER :)
Se puede colocar un iman de 6x3 mm y un tornillo M5
Being short and unable to mount a varia to my bike with a saddle bag attached I decided to create the following solution. This uses hardware included in the Varia and topeak kit. this might fit other topeak bags if the mounting system is…
Printing instructions This model is intended to be printed supportless, be sure to properly orientate models before printing. To achieve this, rotate tip and body upside down in your slicer . In case you have bed adhesion problems, using…
Pretty big update. Abandoned a lot of the previous Ideas. integrated a filament sensor above the cutter. I have everything printed and assembled on a mock hotend but have not tested or installed it on the printer. You'll need M2 and M3…
Tope de puerta en cuña efecto muelle que asegura la sujeción. Tiene un agujero por si es necesario colocar un cordel para extraerlo después de su uso. Impresión: PLA Altura de capa: 0.2 Velocidad: 80
Print the 8 and 16 with supports.
držák na žebříkové topení 20mm
Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes for zipties (sort of like this approach https://www.youtube.com/watch?v=MvBx_74FzUk ). I haven't looked at jridley's…
Rotate it - it looks different from every angle! This is the fourth in a series of four “cathedral” ornament designs. Tomorrow, I'll publish the first of a new series of ornaments. I plan to publish one Christmas ornament a day for the…
I like the Topeak Smartgauge D2 and have one in each car and one in the workshop. Since I always check the MTB tire pressures before we ride, it's good to keep it handy. I had just been keeping it in the back of the car, but realized I…
Modifications: * Shorter saddle rail clamps * Longer neck * Cutout to allow saddle move further to the front * Smaller nut holes. Nuts rotated in holes of original model size. * Holder wall that click mechanism grabs is more narrow, so no…
ACTUALIZACION: He modificado las piezas para hacerlas mucho más resistentes y un poco más finas. Hay que juntarlas con un alicate con lo que no hace falta nada de pegamento. Imprimir a 0,15 y 60% de relleno. I have modified the pieces to…
2024-05-20 update: see improved model here Relatively permanent mount on the rear saddle rails for Topeak QuickClick compatible saddle bags. I made two versions: one flat (original design), & one round so you can slide the whole mount…
The topedo is made with cavities for ballast. The chamber for ballast is approx. 150 cm3/cl. Balancing is important. Too little ballast will not dive, but will search for the water surface. Too much ballast will sink. Theoretically, the…
Tope para el material en la Silhouette Cameo 4
Tired of filament poop flying everywhere during color changes? This angled poop deflector is designed for the Anycubic Kobra X to guide purge waste directly into the collection bin below. Unlike a simple vertical wall, the specially…
Created because original part broke after couple of years of usage. Mine is printed with Fiberlogy PCTG and works greate, printed with 4 perimeters on, with 40% infill. Designed to be printed on 0.2 layer height! After printing you will…
Repuesto para los topes de las persianas.
Wandhalterung für eine Topeak JoeBlow Sport III Standpumpe. Damit kann die Luftpumpe an die Wand gehängt und der meist ohnehin schon begrenzte Platz in der Fahrradwerkstatt besser ausgenutzt werden. Außerdem hat sie ihren wohlverdienten…
Háček na žebříkové topení v2
This is a case for the Topeak SMARTGAUGE D2 digital gauge. IMPORTANT : There are versions for the new and old versions of the Topeak SMARTGAUGE. The old version of the gauge fits in the new version of the case!!! The only difference…
QuickClick mount for racing type saddles. For Topeak Wedge Bags. This has been remixed so it mounts further back on the seat rails. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200…
TOPE DE PUERTA FÁCIL Y SENCILLO DE IMPRIMIR
Se rompieron los topes de la persiana y diseñé uno nuevo igual que el que tenía
I made this adapter so I can keep using the Ridecase mount on my bike and still change devices. I simply attach it to a spare case for a phone or device with some good 3M double sided tape and it is strong. I recommend printing in Nylon…
Česky Nenašel jsem háček na můj rozměr koupelnového topení. Vytvořil jsem proto háček pro rozměr trubky 20mm a rozteč trobek 20mm. 28.5.2025 Přidán zaoblený háček. English I couldn't find a hook for my bathroom heater size. I therefore…
This is a variation on my Cathedral Christmas Tree Topper. The only difference is that this time, the windows are open so you can see through them. The design looks great in any kind of filament - multi-color, transparent, rainbow, glow,…
This spacer allows you to mount standard side bags on your rack. Print with No Support PLA
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. Both halves of the ornament print “right side up” so you can print with two or three color filaments and get the colors to line up…
I bought a Topeak Omni Quicktrack adapter for my Aventon Level .2 bike, the supplied clips aren't wide enough for the Aventon rack. I tried printing these in PLA and PETG, and they both snapped after a few bumpy rides. Reprinted in ASA…
Universal base with allow you connect something (bag, tools etc) to Topeak QuickClick mount.
zapich do dotru ve tvaru vily
Este tope de puerta es lo suficientemente robusto como para amortiguar el impacto de la puerta y proteger tus paredes de golpes y daños no deseados. Además de proteger, este dispositivo también retiene y mantiene la puerta abierta a tu…
This is a simple Mount for my Garmin Varia Taillight. The insert is a Garmin Part.
This mini ratchet is sold by Topeak and O'Reilly Auto (branded Power Torque). This 5 hex bit holder is printed from TPU and clips onto the handle of the ratchet. If you use short bits, two holders with a total of 10 bits clip onto the…
Ovládání pouštění teplého / studeného vzduchu do zadní části auta (minibus)
Jednoduchá (nenaklápěcí) mřížka výduchu topení jako náhrada za zničenou původní. Funkčností naplňuje možnost nastavení ofuku bočních oken, což samotný výduch bez mřížky neplní. Tisknuto z ASA CF (pro vzhled) možno samozřejmě PET atd.…
Just stick it to the quickclick and you're good to go. Printed in extrudr PETG with one layer grey for the logo. No Supports needed. Edit 07.08.2023: added a step- and stl-file without a logo
IF THE WIND THROUGH A WINDOW IS A PUNISHMENT FOR YOUR DOORS, USE A DOOR STOP LIKE THIS MODEL AND YOU DON'T HAVE TO CLOSE THEM ON A WINDY DAY. MATERIAL ABS - NOZZLE 0.4 - QUALITY 0.2 - WITHOUT SUPPORTS - FILAMENT USED (m) 11.79 - FILAMENT…
I'm changing to a skeletonized gantry + mgn9h to make my Y axis lighter. I couldn't find a mgn9h mount so I made one.
Pack PAW PATROL Topers Cake EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modeloEu só peço para me seguirem nada mais obrigada e eu…
I have always wanted to mount these NiteRider tail lights on the back of my Topeak rack. The provided seatpost mount is always blocked if I have anything substantial on top of the rack. These are both very popular brands in their…
My wife and I recently purchased a milk crate from Fred Meyer : https://www.fredmeyer.com/p/sterilite-plastic-black-storage-box-milk-crate-containers-home-6-pack-/0074427132996?fulfillment=SHIP&searchType=default_search for our radrover…
Sparepart for the "Spacer" for the "Frontloader" (handlebar bag) from Topeak. The part ist used to adjust the distance between the handlebar and the bag. In oder to be more flexible, I made two different versions: standard version as it…
use M5 6-10mm shrews. this is mounted on my svo8. works great for this bed.
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
Family has a workshop, things get busted, get run over by cars in the parking lot, get melted (welding, heat gun, etc), cut, dropped, list goes on and on. Everything is printed in PETG, I recommend printing at least in PETG if not ABS.…
PETG perimeters 5 layer 0,2mm infill 30% gyroid
fue diseñado para el concurso, pueden modificarlo en dimensiones, sin embargo a mi en ese tamaño me funcionó perfecto en la puerta
ABS/PC or another strong filament and 100% infill req.
Simple clamp mount for a Garmin Varia RTL515 quarter turn, using the original insert that comes with the light, a few M3 screws and some heat inserts. Has a 10 degree rake on the stay to suit the rear tube on a Topeak Super Tourist, as i…
Tope para estanteria, evita que la estanterias se muevan, facil de imprimir, archivo editable en solidworks, cambiar de lado en el slicer para tener Dr y Iz.
This is a spacer made from flexible filament for my Rose backroad and Topeak frontloader. This part makes space for the brake line and the shift cable at the handlebar. It fits to the original Topeak spacers. Maybe it is possible to use…
Since mit seatpost has a pretty odd aero shape, I needed to modify the mount to be a bit further back und down.
Sistema de tope de puertas con manetas, además se puede dejar sujeta la puerta para que se mantenga cerrada.
Po zhotovení rozvodu topení jsem vyrobil model ze dvou polovin na zakrytí otvoru pro montáž trubek
Se puede usar, con adhesivo de doble cara, o fijándolo con tornillo
Topes para la Honda CB650R
El nombre lo dice todo. Impreso con filamento flexible de Sakata
Topeak Prepstand Elite/Pro bike repair stand replacement parts for rotating arm Background My Topeak bike repair stand has been of great use for me for over a decade now. Consequently, the interlocking teeth of the rotating mechanism are…
I used it to attach an Abus lock to MTX rail.
An Opener for (european) shoppingcarts I tested it and it worked great.
Este es un tope para persianas que impide que se meta dentro del taparrollo y quede atascado. Se coloca en el extremo inferior de la persiana y se ajusta con un tornillo. El tope tiene una forma cilíndrica de 32 x 28 mm, con una pared de…
Some Bontrager saddles feature 2 M5 tapped holes, which is nice for mounting all sorts of things. Here is Bontrager Blendr Saddle Accessory Mount which uses these hardpoints. I have a Topeak saddle bag which I wanted to mount. Because I…
Just print and replace SelleRoyal mounting system with this one. No modification to the saddle needed. Uses original screws. 20 degree angle version is recommended (SelleRoyal_topeak-20.stl) Tested only with SELLEROYAL SCIENTIA ATHLETIC…
Piesa hecha en TPU con un 90% de relleno con un hueco de 2 cm x 2 cm para la entrada del palo del bastón. Foot made of TPU with 90% filling with a 2 cm x 2 cm gap for the entrance of the cane shaft.
This adapter allows a Topeak Quicktrack rail to be mounted to an Aventon Pace bicycle rack, since the original mounting brackets weren't wide enough for this rack. Note that I used heat-set inserts (M6*8*8) along with longer screws…
Stopper for shoe cabinet Measures: Inner width 8 mm Inner height 11 mm Outer width 10 mm Outer height 16 mm Total height 27 mm Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Fijación tope para zapatero Medidas:…
Es un simple tope que mantiene la distancia entre los engranajes de tracción del filamento. Esto produce que no haya sobrecargas en el motor del extrusor y ademas que no se cruce el gatillo. Es un efecto que se produce por la fuerza que…
Have a older Topeak MTX1.0 rack but want to use a MTX2.0 accessory? This adapter plate lets you use MTX2.0 on older racks. Older 1.0 racks have a ramp that don't allow the MTX2.0 latch to stay latched. This adds a flat surface so MTX2.0…
Since I tend to break the snap-in part of the bag on my montainbike, I decided to design a spare part by myself. This is a spare part for the Topeak MTX Quicktrack system supporting a lot of bags. Usually the hook breaks when you are in a…
stoper for drill you will need M3 screews and nuts fro this
Diseñé este modelo en fusion 360 ya que necesitaba este repuesto para el kia rio 2016 Filamento: TPU
Este tope de seguridad impreso en 3D está diseñado para jeringas de 60ml y se utiliza como parte de un sistema de drenaje postoperatorio improvisado. Al proporcionar una solución más eficiente y económica, este diseño reemplaza la…
Geometryczna zawieszka w kształcie nietoperza z czaszką, rozłożonymi skrzydłami i oczkiem do zawieszenia. Pasuje jako dekoracja na Halloween lub ozdoba w stylu gotyckim. Model ma płaski tył. Wymiary: około 128,5 × 65,7 × 9,4 mm. Plik STL…
so I originally printed the Topeak rail from here: https://www.thingiverse.com/thing:4438950 But I needed holders for the panniers that come out of it, so I added some attachment points where the rear rack attaches. You'll have to mirror…
This is an adapter for permanent or temporary mounting of the Topeak Redlite Mega tail light to Topeak racks. It's anchored by two M5 screws, fits very well (at least on my printer) and even has some theft protection with the optional…
Toper Cookie Srecan Rodjendan EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modeloEu só peço para me seguirem nada mais obrigada e eu…
Impreso en PETG Layer 0.2 mm Infill 30% Soportes ON
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are Kleetope shapes of the Platonic Solids. See:…
2 pieces of my MTB mudguard were broken so I modeled new ones.
