429 models
MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I wasn't happy with the printable versions available out there, so I made my own. This version has stable game pieces that won't shift during play. The design replicates the original game as much as possible without requiring printing…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Print with your favorite color/filament and customize your victorinox pocket knife! Very simple to install, just remove the old ones and push the new ones in, just a simple pressure fit works well. Victorinox pocket knife dimensions:…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Once I bought some pulleys to hold my ladder up to the ceiling, but they were not strong enough one day they broke. So I designed new pulleys, and I designed them in such way outside would look the same, both halves would be the same so…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…
Print approx. €12.54–€15.33 excl. taxPreliminary estimate for one variant
3D Topographical map of the island of Santorini. This model has exaggerated topography to make the counters stand out a little more. The code includes a color change to allow the water to stand out from the land.
Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant
Suitable for storage or as a gift box. I added a small loop that keeps the box closed. It can also be printed in PLA.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
stand for storing 3d printed RC car PV3S against wear of leaf springs height 85mm stojan na uložení 3d tisknuteho rc auta PV3S proti opotřebení listových per výšky 85mm
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Monitoring of PC parameters was made according to the project of Alex Gyver using a screen lsd 2004 and arduino nano v3 with usb-c port. All parts are printed without supports. I printed with a 0.6 mm nozzle, but I will add an z-code…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
Saya pro kuchyňský nůž Victorinox opatřena samolepicí magnetickou fólií tloušťky 0,5 mm
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is an updated version of my Print-in-Place Container for Victorinox Tomato Knife . The old version had some issues when inserting the knife and the magnets didn't fit well. The new version still need two magnets (≤ 8mm diameter) but…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
!!PLEASE CHECK THE UPDATED VERSION !! I'd like to take my Victorinox Knife with me when going camping so I designed this storage container to keep it and me save. There are two magnets (≤ 8mm diameter) required for the snapping mechanism.…
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
All of you know this situation: you're out in the wild with your 2018 Barolo di Pio Cesare and want to uncork this masterpiece of red wine. You have your Swiss Tool handy but &$§@**!!!! Where is the corkscrew? Must be somewhere in your…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
Radon is a chemical element; it has the symbol Rn and atomic number 86 . It is a radioactive noble gas and is colorless and odorless . Of the three naturally occurring radon isotopes, only 222Rn has a sufficiently long half-life (3.825…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Um meine Gesichtsmasken (ich nutze zumeist 2-3 Stück im Wechsel) bei der Arbeit vernünftig aufhängen zu können, habe ich die Dicke der Tischplatte ausgemessen, sie beträgt 2,5 cm und mir dann diese Halterung mit Haken gestaltet und…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Description To ensure the timely replenishment of my pet bird, Peanut’s, water supply, I devised an electronic project. Previously, I would often forget to check on Peanut due to his ability to go days without water. This project aims to…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
First version of a drone based on a 90mm ducted fan capable of hovering using a thrust vectoring control system made of four jet vanes independently controlled by high speed heli servos. The stability is achieved through body angular rate…
Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…
Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…
As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…
I had sale this models on Etsy for some time but now it's free!
This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…
Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…
Santorini is a 2-4 player board game that's almost completely made out of 3D shapes that stack on top of each other, which makes it perfect to 3D print. You can find the official rules of this game here:…
Mine snapped in half after many years of use. Here is a simple replacement. Printed in PLA, with 0.05mm layer height. Lifted off the build plate without a brim so I recommend turning that on. PS: I only use this to clean out my phone usb…
This is a remix of a remix. This planter captures the essence of Santorini, Greece. The drains in the bottom of the planter will drain directly into the pool, filling it. This can be printed with no supports! I added authentic looking…
Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…
Me being lazy to go to the store to get my own Santorini desktop game I gave myself the challenge to make a slight knock-off copy of the game with a sliding box, where the lid acts as a game board. This version is the basic version of the…
The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers
Portable version of the famous game Santorini. The game board is embedded in the box, which contains all the pieces to play. My recommendation for printing: 40 tower blocks (up to 44 fit in the box, but very tight) 16 Dome 3-4 pairs of…
Victorinox microscrewdriver blank
Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools
NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…
I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…
I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…
Classic Car from a classic era. Good luck Michael and please upload some pics when you print it, Cheers Jace
Info: original-size casssette case with realistic tape lookalike design drawn on the case (in my previous model I have design a cassette box for storing business cards, so I have adjusted it, so real cassettes can fit in) for storing real…
Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…
I made this hex bit driver 6mm (1/4 inch) so I could use my Victorinox SAK as a repair screwdriver. No supports required but you might need a brim. Versions There are two versions one for 91mm like the compact, huntsman and the other one…
Customizable scales for a Victorinox knife with space for toothpick/tweezers
I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can…
Print it laying on the site, the printer will bridge “across the blade.” If the blade doesn't go in, check the bridging direction and if needet adjust the angle of bridging in the infil tab (PrusaSlicer). If it still doesn't go in, lower…
Thickened some parts, removed overhang on the side as much as possible to make it more ergonomic. You still need small touchup to remove sharp edges digging into your palm. I recommend using stiff filament for this. I printed with 0.6…
This is a simple credit card sized toothpick collection for emergency use. It fits 11 single toothpick and they are easy removable from the frame. They can be used also in all that difficult situation where you need something thin to…
Victorinox Deluxe Tinker Beltholder This is a beltholder for your Victorinox Deluxe Tinker. You just need to clip the Deluxe Tinker in the holder to fix it. Your EDC is reachable with this holder. Have fun !
Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.
Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.
Stand for 91mm swiss army knife multitool.
A 360° thrust vectoring unit for 70mm EDF's. The unit should be scalable as it originates from a smaller design, plus you have the ability to tighten the nozzle via a screw helping you with tolerances. The ball joint has an inner diameter…
Was going to install on a plane, but didn't want to disassemble it to install. Its made for a 64mm edf but could most likely be scaled up or down for a larger or smaller edf. Will require 2 servos, I'd recommend at least 9g if using a…
Simply screw onto corkscrew to attach.
Small things tend to disappear occasionally. Same happened to a toothpick in my folded knife. This is quite tight replacement piece I fitted into my knife.
Here is a 3D board for the game Santorini. The reliefs prevent the buildings from moving like on the original board. I made a V1 and a V2 for the players who have the first version (kickstarter one) and for those who have the second…
Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…
Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.
For Slot based PCBs like AGP, PCIe, PCI, EISA, VLB, ISA see the normal slotholder.stl or SCAD file. For GIO32 (SGI) or SBUS (Sun) Cards see the GIO32 stl or SCAD file. For giving large x16 PCIe GFX Cards more hold use the “extension”…
Thanks Quinsta for the origional, I have remixed the logo as it would not print correctly.
A small box for your EDC gear with a Swiss card as lid. Size is similat to an Altoids tin but a bit taller for more space. Printer: Ankermake M5 Layer: 0.2 Infill: 25% Supports: yes, organic Feel free to edit.
A blade cover I initially made as part of a gift. I've removed the monogram from the stls but have included the 3mf file so you can put your own in.
A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…
Easy to print sheath for Victorinox Fillet knife
Magnetic mount for cheap chinese thermometer. Thermometer can be installed in two ways - with magnets on bottom or top (including top of P1P/P1S). Mount under angle, so P1* LED doesn't shine too much into LCD. Works with X1C, too. Using…
If someone could manage to make this stronger, my pin keeps breaking.
These are meeples I did for the Santorini Boardgame. They are supportless
This is a set of gridfinity based containers/bins which I created to fit a TS101 & TS100 soldering iron and other soldering related tools. There was always something I didn't quite like about existing designs and wanted something custom…
This is a Remix of the VO-CH Air Monitoring Droid originally made by Bugman. This was redesigned to use the component sent in the Alien3D UFO Monthly Box. The major differences are changing the Arduino to a D1 Mini and the air sensor to a…
they are thicker than the orginal scales but you can scale them down if you want.
My BYD Shark 6 is packed with bells and whistles, and I love them all but I wish I could turn off driver monitoring and have it actually stay off! Since it doesn't, I took matters into my own hands. After taking a few measurements (and…
Works with rambler, jet-setter, mini-champ or any 58mm with Philips. Print on an angle for best results. Takes a 5mm magnet to securely hold the larger bits. Edit: new files will not exactly match pictures
This is a hardware-free, fully 3D-printable radiation shield designed to protect environmental sensors (like the FS400-SHT31) from sun and rain. By shielding the sensor, it allows for more accurate ambient temperature and humidity…
@TomHaynes_30709 created a nearly perfect replacement case for the swisscard. My case had broken so i printed his and everything fit perfectly, but the knife, pen and toothpick were just falling out. So i looked at the old case and there…
This is a remix of Santorini Pocket Mini by sys_er26 and Gut Shot Games - Photo Caddy Board Game Insert Collection Essentially this is a combination of the 2 making a fully playable version of Santorini to fit into Photo and Craft Keeper…
This belt clip is inspired by this model , although I created the CAD model from scratch. Changes to the original: more space for the belt loop, add a closing mechanism that takes a piece of filament to stay secured. Use a lighter and…
Here is an upload of a hair tie dinosaur that has storing, its a really good model and can be used for just decoration and not even storing recommend pla [or any filament] printing speed 40 to 60 just take it slow to make the best details.
Using the https://www.printables.com/model/53253-parametric-kitchen-knife-sheath-improved-remix parametric file, I made a sheath for my Victorinox Santoku. Printed with the thin, non-curved side down in Prusament PLA. Fits well and…
Here are the files for VO-CH He is a Air Quality Monitoring Droid which keeps an eye on the VOC Levels in our maker room and turns on the Fan when appropriate (when we forget. lol) and off again when the levels are lower. to make one of…
I made the Modell longer for : Victorinox "Tomato and table knife" 220mm Print in stl file orientation ! Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 infill 25% ; no support ; print time ~ 1,5 h…
A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…
I have been using the Mini All-in-one Printer Test as color swatches for my filament. I created this to keep them organized. I wanted something that was simple and did not use too much filament. I also wanted the lines to match the test…
About The espCam is an enclosure for the ESP32 CAM microcontroller. The camera is designed to be a small good looking security camera that can also be used to monitor prints. It features a ring light with diffuser that is an improvement…
There are numerous builds of the Santorini board game and its Golden Fleece extension, but none so far contained the Ram Figure, so here it is. I've combined the head of PrawnicConsumption's Aries the Ram with nwgraphics's Pedestal.
When traveling I often worry I'll leave my SwissCard in my backpack etc and end up in trouble in an Airport. I could just remove the knife (or be more careful! :P) but then it would leave the hole open for dirt and grime. I designed this…
I have been carrying a Victorinox Midnite Manager with an USB stick for quite some while. Unfortunately, Victorinox does not provide any upgrades to those USB sticks. As I need to carry quite a few extra GBs of data with me, I wanted a…
This is a thrust vectoring system that uses micro servo motors and a cytron maker nano to work. The thrust vectoring nozzle is attached to the thrust vectoring module with the 3D printed bolts which fit in the holes. The arms need to be…
as other models didnt workout for me, i created one by myself. both parts need to be aligned and then welded together, e.g. with soldering iron. or use some glue.
EDIT: Check your knife before printing! Scale have holes for only three rivets. Fits Victorinox Recruit. Remixed from @ Punkelopment. I made these in Wood-filled PLA and fit is almost perfect. You might tweak it a little depending on…
Simple box for storing cleaning wipes for glasses. Has a small bin in the front to store the 1/2 sheet of the lens wipe after tearing off one of the pair. Made to fit the Zeiss lens wipes packets that are approx 50x100mm. Created in…
I love my tiny swiss army knife from Victorinox. So after the covers broke, I had to make them myself. I recommend printing the LED cover with a transparent filament. They snap on without trouble, but don't get off again easily :-)
Remix of HolzMax Toothpick to fit in the third plus scale slot. Perfect to carry a toothpick and the Firefly Firerood in a plus scale victorinox. Printed with 0.1mm layer height. Instruction to open the third slot from Felix Immler:
