Counting matching models…
This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
Print in PETG or PLA Different sizes included for different Schedule 10 manufacturer OD's Works well for fabrication of Manifolds or other 3 to 1 intersecting schedule 10 components Use 3D printed template to slide on pipe, and mark for…
I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
I liked Cameron's design for a cover panel, but needed one with a cutout matching for my choice of a thick cable going out through the side. Maybe someone else has use for it. The opening was made to fit a twice isolated RKXB, 2x1.5mm2…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe für meinen Bike Anhänger ein paar hacken gebraucht um ein Expander leichter befestigen zu können
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
The front right leg of the mini squash ball legs with a simple cutout for those of us using the Levendig lcd with power and usb mounted on the side. This cut should provide enough clearance for the usb that came with the mini. Bulky USB…
Print approx. €12.89–€15.75 excl. taxPreliminary estimate for PETGSource material: PET
I had the luck to visit Portland recently, and to my great joy (and even greater misfortune for my bank account), I happened to find the Saber Forge showroom, while looking for an Airsoft store. I ended up buying a premade Acolyte saber,…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
MMU3 Ele Cover (R4) with cutout for sheep on the PCB. USB access hole may need some support.
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure end cover for Hammond 1593KBK enclosure (Enclosure available from RS Components part number 773-3173). This model features a RJ45 cutout centered in the end plate. Recommended to print face down with support material, which…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure end cover for Hammond 1593KBK enclosure (Enclosure available from RS Components part number 773-3173). This model features a USB cutout centered in the end plate. Recommended to print face down with support material, which…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Motivation Technically speaking, this part is not requred, but I did't like the open cutout in the MDF backwall for the impedance switch. Therefore I designed and printed a blinding part that matches the speaker cable outlet. Printing…
These are simple lids for FreeGrid boxes, featuring neat right-angle cutouts to be able to see into the box, which also make the lids easier to pick up. Contains 1x1 to 1x3 and 2x2 and 3x3 sizes. Other sizes can be made using the .fcstd…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
Another handy model for those of us whom are beginners to CAD. I use TinkerCAD mostly, and this is an easy way to make a cutout in your projects for a USBC Female receptacle.
Heart shaped gift box with rose cutout design designed for Mother's day. The original model is large at about 20cm in size and it was intended for chocolates or other treats. As it is, it was too big to print both the lid and the box at…
For the M12 version click here This remix adds a cutout so the cable can be removed more easily, and has redone PG7 threads for a better fit. This mount does not interfere with titanium gantry backers (see photos). Y endstop relocation I…
The original model was good looking and very sturdy. The only problem was that when printing on its side a part of the “upper” edge of the charger cutout would be printed into thin air. To be able to print it without supports or without…
This is the Xanoy's awesome phone holder with a middle cutout so you can pull the phone from the stand without having to disconnect the cable. All the credits for this neat design go to Xanoy. --- Print Settings I printed the model scaled…
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
The Abstract Cutout Vases are a stunning example of modern design, combining bold shapes and minimalism to create a unique aesthetic. Featuring organic cutout patterns and soft pastel hues, these vases blend artistry with functionality.…
Remix adds hexagon cutouts in bottom and lid, also with cutouts
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…
The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…
This model is compatible with the lego system.
This model is compatible with the lego system.
A universal key that works for my interior doors :) Notice : use it at your own risk! Print options You can print a full key, splitted in two parts. - or - You can print (without support) the thin one that I'm using in the video below. Demo
Skeletons in ornamental frames, keeping your place between chapters. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun Matte…
This remix of beebo's designs fits well into Kermit's top half flipper case. It holds the wifi board snugly and has space for the pins so they aren't rubbing up against anything. This cutout was designed for fivesixzero's protective case.…
This model is a remix of Bryan Duke's fantastic model, the only thing I've done is to add some (very hacky, very quick) cutouts to allow for easier reading of the paint bottle's labels while they're in the rack. This doesn't quite make…
Flashforge Adventurer 5M Flip up screen cover with USB cutout I made this for the screen to keep the dust out, I've used others but they either were too loose or broke, it was also annoying having to keep removing them. This one is beefed…
This is a remix of the Large Tape Measure Holder by Aaron that has a cutout on one side to accommodate the belt clip on my Stanley tape measure.
Works great in PLA, PLA+, and PETG, would recommend printing at ca. 103%Z-scaling so the phone fits properly. Bonus-Tip: If you print the case with 10ish vertical shells, but 0 top and bottom layers, you can let the infill (e.g. Honeycomb…
iPhone 14 Case, rugged, designed to be printed with TPU/TPE. Extra material on the corners for ruggedness. Optional Popsocket cutout, which allows for it to not stick out as much when stowed. I've been using it for a year and it's been…
This model is compatible with the lego system.
ESP32 Case with Snappable Lid This case is designed to hold an ESP32 board as well as a standard female barrel plug to screw-terminal adapter. There is some room for additional wiring inside as well as an opening for connectors / cables.…
Remix, no top switch cutout and Bambu branding addition. Only right side of the model was modified.
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
unless you have a whole wall of HSW, having 2 or 4 paels of HSW on the wall can kind of look random or out of place. So i cutout pieces from the HSW to add to the corners of your main panels. It will give the impression that your panels…
Remixed to have cutout to allow my screen clips to still fit https://www.thingiverse.com/thing:4074269 Doesn't need any supports still. Category: Video Games
Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…
Just combined a few models into a little sign you could print to put by your keys or something. I added some small connectors to the pieces that would be detached from the rest once printed. After printing this once, it is Very delicate.…
Fits Milwaukee PACKOUT 5-Compartment Small Parts Organizer I included single piece files as well as a version cut in half with 4mm bar inserts to help hold it together when glued. Also works well with this single bin if you'd like to do a…
Inspired by @MattBoyer but hand-created on my own, this is another variant of an American Flag inside of a cutout of the United States. This is perfect for a 4-color printer such as the Bambu AMS line. Included in the files are three…
simpel for remixing your project to fit an neutrik ( or clone ) style connector
Use this template to remove the material necessary to accommodate a manual safety. The XMacro has a thicker frame than the normal 365, so I remixed the template to widen it the necessary amount. Just print the model (I recommend 4 copies…
For the PG7 version click here This remix has a thread for an M12 cable gland instead of a PG7, and retains the chamfered cable cutout for easy installation and maintenance. Link to the Y endstop relocation that I use .
A minimal, protective half-case for the STM32 Nucleo-144 development boards, with heat set inserts and screws.
This model is compatible with the lego system.
That's no moon… --PROJECT STARDUST-- It is MiniWorld3D's 10th Year Anniversary! On this festive occasion, we celebrate Star Wars Day of May 4th with the most iconic landmark/locale in the series: the Death Star . There have been 3D…
Modeled to be similar to pro kendama designs. You will need to find some string. Actual Kendama string is recommended. You can get it from companies like sweets kendamas. If you arent able or willing to go to kendama suppliers, .75mm…
This one is not meant to be printed but serves as a cutout in case you want to embedd a Keystone module into any part. Just substract this part from any plate to create a keystone socket.
Small modification of original model, lager hole added, since my screen have extra usb-c port for power and data. Also link to Onshape, if you want to modify it more:…
There are many different sizes, both in width and length, and in height, and yet the hexagons are modeled the same in all models and of course they still remain symmetrical.
I call it the “eco” version because I tried to design a frame (though visually a solid as the first one) that needs significantly less material to print. Having set infill to 5% you need only 56g of PLA. Furthermore I added mat and back…
It's the original box, but I added a cutout for a better view and handling to get things out. 🙃
Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.
This is a goldfish cookie cutter if you ever wanted to make homemade goldfish crackers! This will allow you to cutout 15 goldfish with each stamp. Once you have the dough rolled out to the appropriate thickness use this to cutout the…
A 3D cutout poster of Chainsaw Man anime, made with filament painting made easy by Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Generic Black Transmission Distance: 0.3 PLA+ Sunlu…
This is a remix of the 18650 battery holder for the (tr)uSDX. It allows for a 3S BMS off Amazon (~$2). This allows for safe cut off when low voltage is hit, and also for safe charging and balancing off a ~12v power supply. I tried to…
Spinning Christmas Ornament (Snowflake cutout) Size: 67.8 x 81.4 x 5 mm Settings: Ironing: Top surfaces Wall generator: Archane Infill pattern: Gyroid 10% Top surface speed: 50 mm/s The model was printed on a BambuLab A1. Powered by…
This is a remix of the original Bambu AMS Disconnect Tool by Jody. I have only made a slight change for this remix to add a cutout for a 6x3mm magnet to all the tool to be stored directly on the back panel of the X1. The magnet is a press…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
This is two simple models: ECAS04 press-fit bowden fitting STEP model for CAD Cutout for ECAS04. This is meant to be used as a negative volume and your final part should be printed horizontally , not vertically, with respect to the hole.
This is a remix that was born for the purpose of using this for dual z motor set up on an Ender 3 / Pro / v2. As the original method of mounting the 2nd Z axus stepper motor is similar to the stock one, which will cause issues with…
This is a holder for Husqvarna batteries. It allows the batteries to be charged in place. The back is open, so you can mount a spring if you want. The the battery will fly out when you release it. NOTE!! There is a couple of small taps…
This is a remix of the smaller piece with a cutout for a regular USB-C cable. For all the other files, head over to https://www.printables.com/model/383856-wall-mount-for-fire-tablet-hd-10-11th-gen-2021
I know there are other paid versions similar to my model out there but honestly this took me 3 minutes to make in Microsoft's 3D builder (which comes with Windows 11.) This is a bin for the SLIM Milwaukee Packout Organizers with a hole…
With Prusa's new rewards system, if you like this model, PLEASE click the like button Print with supports, should only need them between the body inner and the overhang rail.
This is a remix of 414paint's hatchbox spool drawer. I added a cutout to act as a handle for easier access as well as another drawer with a divider. The original design here. https://www.thingiverse.com/thing:3261053 Print Settings…
The same complaint mechanism and inserts but with a modified case. I added a dovetail on the original base and a cover that allows you to grip the handle easier without putting your fingers onto the spring and limiting its movement.
Ready-to-print bins and STLs generated from the OpenSCAD Extended library, rather than just the script to run and tweak (there's a lot of settings). Magnet inserts and half-cut bases to allow using with offset or half cell baseplates.
I sliced the model “laying on its back” in the orientation where the radio would be facing up. There may be a better way to slice it, but I think this gives it the most strength. Supports were moderately difficult to remove, so you may…
Insert permettant de stocker le jeu de base + toutes les extensions sorties en VF à ce jour dans la boite de base, cela inclue: Extension monde souterrain, y compris le second plateau Extension maraude Les trois packs nomades L'insert…
This model is compatible with the lego system.
This tray slides into the rails on the sides of the Festool MTF/3 table. The bottom is curved to help retrieve items in the tray that may otherwise get trapped against the sides. Print stood on its end (standing vertically) and you can…
This 3-part 3D printable housing system allows you to install an ESP32 and HC-SR04 sensor into a waterproof container or tank lid for use as a smart fill level sensor. It’s perfect for home automation projects using ESPHome and Home…
The model does not require supports
Just a small modification to the original model so the waste bucket slides easily up against the printer without bumping the poop chute or having to tilt the waste bucket. Thank you to the original designer, I love love love this! Bambu…
I have a desk with Ikea's ALEX Drawer Unit underneath and a short BILLY Bookcase stacked on top. So many small items have been pushed onto the shelves, I decided I needed some extra drawers. This template was aimed at allowing drawer…
I know there are other paid versions similar to my model out there but honestly this took me 3 minutes to make in Microsoft's 3D builder (which comes with Windows 11.) This is a bin for the SLIM Milwaukee Packout Organizers with a hole…
This model is compatible with the lego system.
Spinning Christmas Ornament (Gingerbread cutout) Size: 67.8 x 81.4 x 5 mm Settings: Ironing: Top surfaces Wall generator: Archane Infill pattern: Gyroid 10% Top surface speed: 50 mm/s The model was printed on a BambuLab A1. Powered by…
Had a request for a version to accommodate common rivet diameter and length, paired with a 12 mm washer.
A quick remix of the Prusa Mini - LCD Back cover - Upgrade that removes the screw holes in favor of a single cutout, to make room for the screw that secures the display assembly to the printer. The friction fit of the cover is more than…
Dividers for Wizards of the Coast | Magic: The Gathering with mana symbols in full cutout. 68 x 99 mm size. 1 mm thickness
SnapCase for Raspberry Pi Zero W Dimensions Designed to accomodate an Raspberry Pi Zero W board. Design Process The goal was to create a neat and quality case for the Raspberry Pi Zero W. It should be easy to print and use the minimum…
It will print without supports. Mostly.
I remixed the original holder with some deeper cutouts so that you can more easily grab an exact number of coasters.
This model is compatible with the lego system.
I've added some levels to mine, just some randoms I happen to have, so the model comes without as they're likely not gonna fit for most.
This model is compatible with the lego system.
A stepped makeup organizer with four compartments of different heights for lipsticks, brushes, palettes, and everyday cosmetics. From above, the outer walls form faceted low-poly hearts. The sides use a repeating regular heart lattice so…
An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.
I love HD 's Catch-All Trays / Desk organizers , but with the narrow 5cm trays that I was using for kitchen utensils I always scraped my fingers or had to turn my hand just right for it to be comfortable to grab items. I decided to throw…
Evil Witch Face Halloween cutout wall art
A case for my Galaxy Fold 6 that is based on this case on printables ( https://www.printables.com/model/941927-penultimate-z-fold-6-case-collection ) with the adition of a slim s-pen slot from this case (…
This is a plate with 6 brackets for Dyson Air Wrap attachments. The base plate on request hast no cutout for the IKEA "VARIERA" shelf : The brackets have recesses for the Dyson Airwrap attachments so that they can neither wobble nor…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
