1,971 models
Hello everyone, I present to you the model of the car Tayota GR Supra A90 The model is presented in its original form This model is free and therefore here only the chassis and body with headlights are shown. details of the left side, you…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
Designed to print-in-place without support. 0.2mm layer height works well. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 3 parts in the slicer, with a separate lower insert. Tested…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is the Toyota logo. How I Designed This Imported SVG of official Toyota logo to Tinkercad and resized. Category: Signs & Logos
Summary This is a model of a Toyota Supra MK4 in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the help of…
Toyota car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…
STL/Bambu 3MF included.
This is a low-poly model of the legendary 1994 Toyota Supra. It captures the classical sleek design of the car in a low-poly form and features rotating wheels. The spoiler prints good without a support but it might benefit from a tree…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Introduction The Dakar rally is an over two week long endurance race with a total length of up to 8000km. Introduced in 2022, the Hilux T1+ is a purpose-built rally truck built for the Dakar rally. By 2025 it has certainly proven itself,…
USE AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED That being said enjoy! (I've been told that it does not work in a Toyota Toacoma)
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
This is a high poly replica of the new 2020 Toyota Supra modeled in Blender over about 43 hours. Parts optimized for 3d printing are coming soon! Update 1- 3D printable files are available for a 1/16 scale model. Print instructions…
Just bought a used Toyota Tacoma and the trailer hitch was a bit rusty and ugly. Of course it was missing the OEM plug / hitch cover but I had one from my older totaled Tacoma. I ended up measuring everything off the original OEM hitch…
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix. I used eSun PLA+ as filament and it seems to be robust enough for the small clips on…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.
This is an oil funnel used for toyota vehicles. It should fit all toyotas with a threaded oil cap.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Please click if you appreciate my work :) A 90s legend reimagined as a modern wall-mounted sculpture. This stylized Toyota Supra MK4 is the perfect blend of iconic JDM spirit and contemporary design. Created as a 3D printable wall decor,…
Its a model of this awesome japanese car.
Toyota keychain, can be printed with multi material.
Just a keyring for my car Category: Automotive
My cars Toyota emblem came off and we needed to buy a new one, but they are so expensive! So I modeled one instead! It fits great but needs some glue to be held in. I would recommend using grey filament or painting it grey. I haven't…
Cup holder for mid 2000s Toyota Corolla (E120), My friends car didn't come with cup holders, so designed this to fit in the centre console, it has a weird cubby with lid next to the handbrake where you would think they would put cup…
The 2024 Land Cruiser is a bit short on storage, especially if you have the Cool Box center console. This is a removable tray insert that still leaves enough space below for 12oz cans. Print in whatever material you have confidence can…
This is a coin holder replacing Toyota Switch blank, this holds 14 coins in total **This fits only the Tall size of Toyota Switch blank (40x22 mm ) -There is two designed diameter -For 25mm Dia (or smaller) coin. -For 27.5mm (or smaller)…
Designed to print-in-place without support. 0.2mm layer height works well. I printed mine out of PLA and it fits snug without play. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 4…
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
MItutoyo 500-184-20 Battery Cover
Print the toyota logo a little smaller (I have it set up on the 3mf file it should be 49.94mm on X) Sand them smooth or add resin and paint in silver and black or whatever you like Glue them together Clip it in and enjoy! I will upload…
You need some M6x16 or M6x20 Socket head cap screws. The screws of the Trunk lock wont fit. Update 17.05.2025: Version 3 with stronger screw points.
Broke the pegs on my toyota logo, so reverse engineered it and made my dual color version. Exact copy with the 3 pegs to make it click in. Just glue the parts together after printing. Like my work?? Please consider donating me a coffee :)…
Toyota supra mk4 This 3D model is a flat, minimalist silhouette of the Toyota Supra MK4, designed as a decorative piece. The model represents a stylized front view of the iconic sports car, emphasizing its recognizable headlights,…
This is a print in place MK4 (MKIV) Toyota Supra. It prints on its side with print in place wheels that move freely when printed! Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more…
Remix of Desert Dave's "Taco Sauce" holder for MMU2S. Intended to be printed face-down to minimize support material and purge tower height. I used Prusament Chalky Blue and jet black. It's not a perfect match for the Cavalry blue, but…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.
These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
This meticulously designed 3D printed shell of the Toyota Supra RZ can be created using either FDM (Fused Deposition Modeling) or resin printing techniques, offering flexibility to hobbyists and enthusiasts. It captures the sleek,…
You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).
I'm not a fan of wasted time or material so I remixed this Mitutoyo 6 in caliper holder to save on both. There is still a small storage bin in the bottom to hold extra batteries or anything else of a similar size. Change log v1 (…
Update: 13.10.2026 – expansion of the list of supported and community-tested models. 6,10.2026 “Thanks to the community, the models have been tested — see details below. Thank you for the feedback.” @AGB84 - Golf 7 @rpeservis - Skoda…
Body of a Yota Pre-Runner, Sized to fit 1/24 and 1/10
Celebrate the legendary status of Japanese automotive performance with this 3D printable STL model of the Toyota Supra MK4. This iconic JDM sports car model is perfect for automotive enthusiasts and fans of tuner culture, showcasing…
This is a remix of xdcmx's key fob enclosure to accommodate the panic button on the back of the Toyota key fobs. Prints flat without supports. This should replace the plastic enclosure on TOY44 and TOYMT40 key fobs. I broke the plastic…
Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…
Please click if you appreciate my work :) Retro soul in a modern shell. This 3D printable wall-mounted sculpture captures the sharp, unmistakable lines of the Toyota Celica Supra MK2 – a true JDM classic from the golden era of the '80s.…
A sloppy attempt at one of the emblems on the early model FJ40 Land Cruisers. I traced a photo of the emblem in inkscape, exported layers to DXFs and imported them into OpenSCAD to union/difference the appropriate layers. Later models of…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
50mm x 13mm No Supports 4.8mm thick (4mm base and 0.2mm color change)
I'm sharing this for non-commercial / sale use. Please don't steal and sell my design. I've seen numerous cup holders for the land cruiser fj80 and I figured I would design my own since I have a 3D printer sitting in the office. Included…
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…
Simple snap on for the protector panel in the back of a Rav4. Went multiple time to the dealer and never has the piece so decided to create and print my own :). This is more sturdy than the one from the dealer. Use ABS since this is meant…
There is a Toyota floor mat clip out there, but that was way too big so I decided to create my own model, dimensions should be close to a stock one. I would print this one laying on its side with some tree support and 100% infill.
Eine Radnabenkappe mit Toyota Logo Wheel center cap with Toyota logo
The Tundra and Sequoia vehicles have a recall on their volume knobs. They are hard to get at the moment so here is one that will help until they are available. I recommend ASA and 100% infil.
assembly part 1: part 2: part 3: part 4:
Do you fill your Tacoma with petrol or Taco Sauce. Well? Tell the world!
Pinched Toyota body for 1/10th scale, made the roof taller.
This is a remix of Dendeba's AE86, it was perfect size for a keyring so I added a small loop on the model which works perfectly! Link to Denbeda's original model - https://www.thingiverse.com/thing:4914137
Doodled up a new shift knob for my 4th gen 4runner. Design cues from the Teton Workshop shift knobs with some added features. May also fit other Toyotas that have an M8x1.25mm threaded shifter rod. The depth of the hole is 2.5" so check…
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
I edited the model in Blender/3D builder/Slic3r to make it easily printable. Print the car and 4 wheels, then glue them on. Be warned the file sizes are quite large. Check out my print-in-place optimized version of a Supra:…
Supra keychain for car enthusiasts, great model for making your keys prettier Done in PLA with 15% infill and 0.15 mm layer. Came out great. Every make and like is aprecciated
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
I needed a Depth Measuring Bridge for my Mitutoyo Digimatic Absolute AOS Caliper. (You can read my - german - Review of this Caliper here ). Because I needed it today (when else?), I "desingned" one from scratch. OK. The price was another…
Used a previous design as a base for the blank, but added a custom. fitting for the USB cable from the T10 head unit. Bracing put in the back so the cable doesn't push through when trying to attach a USB device. Cable holds in place by…
This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.
I used 2 pcs of M3x5 insert nuts and M3x6 countersunk hex screws for assembling the holder and hex insert.
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
Easy to print Toyota keychain Pla Abs petg Tpu are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
I wanted a Gridfinity holder for my Mitutoyo caliper where the caliper lies fully flat so that its pointy bits aren't sticking out. Behold this immense 6x2 box! Besides holding a 150mm caliper, it also includes two thin slots that are…
Cup holder replacement bracket for the Toyota Highlander 3rd Generation 2014-2019 with rear captain chairs and flip-down cup holder arm rest tray Part Number: 780610E010A0 Print Settings Printer: Bambulab X1-Carbon Supports: Yes…
Print in place Toyota FJ40. printed at .16 layer height %15 infill with PrusaSlicer organic supports. Whatever side the print is oriented may have a rough finish near the hood, unless your supports are dialed in. Model was requested by…
Simple keychain with Toyota logo. Files: recessed variant of keychain - Keychain.stl, protruded variant of keychain - KeychainProtruded.stl, Toyota logo - logo.stl. In case you want to change color the protruted / recessed part has 0.6 mm…
The front cup holder uses a smaller rubber holder that get stuck on bigger cups. Made a larger cup holder. I made this one big enough to fit Stanley, Yeti, Corckcicle and other larger bottles and mugs. The insert can shrink the hole size…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
This is to lock the rear window open at 30mm -Need a key to remove the hook, and could be stored on one of the gas strudes. Update : Support is not needed Improved fit Enhanced lock for the window *Note: -leaving the windows open will…
Just another 70.1 wheel center cap with a Toyota badge on it. :-) Used it for Anzio alloy wheels R18, should fit others, but you may need to scale or edit.
The rear wing model features a sleek and aggressive design that complements the sporty lines of the Toyota GR86 and Subaru BRZ. It follows the shape of the car's body, providing a seamless integration with the overall design. The wing is…
I have seen several tri-color badges for sale online but I didn't like how expensive, flat, and non-customizable they were. Mine has some depth without being super bulky and you can pop them out to swap colors however you want. I also…
Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…
Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm
This model fits fairly snug in the 2018 Toyota Camry cup holder, but it easily fits in any of the other vehicle cup holders I have tried. The phone in the pictures is an iPhone 6 with an Otterbox case on it, but my Samsung Galaxy S10e…
Summary This was a personal project, trying to model my old 91 Toyota Pickup/Hilux (1.5 cab, V6). It is not perfect - mainly in the grill area, and the wheelwells, but the proportions are modeled with help of side, front, and top view…
This is a 3D scan I did of the wheel hub logo that fits most Toyota vehicles. After a while they get old and break off, so why not just be able to print them, right? I resin printed mine (I think that's probably the only way to get good…
I really liked the original design of this but I wanted to make a version that didn't need any hardware to mount it.
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
