Counting matching models…
I modified the Powder Trickler by Nick van Noordwyk , to add a cap to the bottom. That made it easy to add some weight for stability. Nick graciously provided his Fusion 360 project file, which made it super-easy to make changes to it.…
You'll need supports only for the funnel (both inside and out) so paint them on - Organic supports work best. You'll need to rotate the model on the build plate on a Mk3 for it to fit. For the Halo, Flip the model over first, then use…
This is a simple shelf that covers most of the platten to prevent stray kernels from impacting the measurements. It also allows you to place a small mirror like this from Amazon to make it easier to see the LED indicating over weight…
The Open Trickler is designed to mate with A&D FX-120i/300i precision powder trickling. Real time action: https://www.youtube.com/shorts/f51AgIxleoY Please use github for my most up-to-date changes: Mechanical Design:…
A useful little piece. Place the plate on the scale before fitting the Super Trickler on Top. Catches any powder that falls through preventing it getting under the scale plate and makes clean up easier.
Every session there's always the odd kernels that bounce out of the cup and accumulates in to a mess on your work area. To try to mitigate that annoyance I designed and printed a "splash shield" that slides over the handle and snaps on to…
dessicant cap for the supertrickler. helps keep dust and humidity out of the powder hopper. Fill the case with dessicant and then put the cap on. I printed the cap in esun 95A TPU and the case in Hatchbox PETG on my Bambu X1C. If your…
Print standing upp with support at the plate 0.4 nozzle I use Bambu PLA-CF
This is a funnel with stopper (plug) for a SuperTrickler. I didn't like the potential for something to potentially fall into my SuperTrickler when not in use and wanted an easy way to seal it up. Print in the orientations provided, no…
I remodeled this and made a few tweaks to make it more like the original. I have uploaded both a shorter version like Controledburn's version and a standard height version. 11/23/2025 - Added a long version as requested. Print Settings…
Printed with ATOMIC PLA with a Bambu X1C standard PLA settings.
Cap for SuperTrickler bulk tube. Has a plug that extends in to tube, and a knurled section for easy grip.
This is a guide that for me places either the standard AutoTrickler Shot Glass or the AREA419 Powder Cup in the correct location. All that needs to be done to switch is to spin the plate around. Print Settings Printer Brand: Creality…
I designed this base to fit my electronic powder scale that I purchased off Amazon. I remixed the original design to fit my needs and to avoid knocking the trickler over when in use. I will provide a link to the scale that this base fits.…
I created this to help from knocking it over and making a mess… especially after I filled the hallow base of the trickler with some cast bullets. I used m3 bolts to hold the trickler in place along with a tight friction fit. I printed it…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
With a nice wide and tall mouth and curved interior, this cup just works. Also, printed in PLA+, it's never had any static issues like glass or aluminum cups. Printed with supports for the handle.
its a very rough draft, might be a bit to small going to do some redesigns within the week
This 3d printed cone replaces the autotrickler straw, which was always a pain for me. I never found a perfectly matching straw (and I tried a lot, big M, s bw y, some from the shop, etc) and there was a lot of powder spillage due to the…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
Designed as part of my tutorial series. https://youtu.be/Zy_UOalOdp4 Can be printed at 1.5 or 2 layer height
I found that my Hornady vibratory trickler worked a lot better when tilted slightly and needed to be elevated to work with my scale and not get in the way. This stand tilts it 4deg and lifts it approximately 10mm on the left side. I added…
Designed as part of my tutorial series. https://youtu.be/c9DiO21vP-U
Stabilizes and increases the height of your powder trickler. Supports are needed. Scale the Z axis for height adjustment. printed with PETG.
By restricting the small tube the auto trickler V4 throws mor consistently but slightly slower. When you have printed the part running a 3mm drill down the hole will clear out any whiskers. Be carful when doing this as if to much torque…
Designed this to keep my workspace more organized. Has a recess so the adjustable base can be screwed all the way up and sit firmly in the mount. Has push fit connectors to use with snaps. I used the moderate weight bearing snaps found…
When storing my auto trickler between loading sessions i found the hopper can be easily knocked and is very tall, taking the hopper off helped but then the hopper can be knocked over. This is a stand that gives the hopper a stable base.…
The original shop glass does allow the power to bounce out and scatter over the scales platen. this cup is designed to stop powder bouncing out, printed in Pet-G or PC-CF at .20 or .25 layer height. Supports needed for the handle. only.…
Works great for catching unused powder and dumping back into bottle
Works great for catching unused powder and dumping back into bottle
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
I keep a cover on my AutoTrickler and every time I take it off, the lid come off because it hangs over the edges of the clear tube. This lid fits inside the clear tube so there's nothing for the cover to grab onto. Print it upside down…
cap for the supertrickler to keep dust out of the powder hopper.
cap for the supertrickler. helps keep dust and humidity out of the powder hopper. I printed mine in eSun 95A TPU on a Bambu X1C. If your slicer and printer supports STEP files, use that. It will provide much better print quality than STL.
SuperTrickler powder measure stand. This design can be used independently, or it can be attached to the square SuperTrickler powder bowl that people are 3d printing. The ring has a small B on what would be the "Back" of the ring. This…
Cap for SuperTrickler powder dispenser with Aluminum vibration tube. Keeps powder from possibly spilling out when filling or emptying machine.
Dual purpose! Cap to keep stuff out of the memory card slot on your SuperTrickler. Tool to remove the card from the slot by using either short side to push down on the card to pop it in/out.
