69 models
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…
125mm - 5" výška 10mm PETG - Podpery nevyhnutné, ideálne Organic
Tripple spray can holder (holes are 68mm) Easy to print without support Printet with Eryone PETG gray
This is an stand for an three macbook like laptops as hexagonal pattern. Infill as max as you can for the durability! Developed for the height layer - .2mm
DIN-RAIL Collection https://www.printables.com/@yahbluez/collections/470887
This is a remix of the 3 in 1 Magsafe charger that was remixed by Lenrui. This model has a much larger area for the cable of the lower Magsafe charger. It also has a little larger channel for the lower charger cable to allow for it to be…
This holder is made to take up to THREE… spray cans aerosol sprays fingertip dispensers disposable 0,5l cans like Coke, energy drinks etc. drink/coffee cups other round stuff with up to 70mm diameter The size L holders have a width of…
Sim racing rig made with 4040 and 4080 aluminium profile and tripple monitor stand Category: DIY
Someone had to do it.... so i did. Big part, so there are 2 versions of it. A full size and a splitted model to glue. Print as you wish, but you probably will need support. Best to use tree support. Thanks to @3DPrintSOS for the Idea,…
I had some issues installing SKF bearings and mainly dust seals on my forks on triumph street triple 675r. I had created and printed some variation of some fork driver I downloaded to 41mm. But, after successfully installing the bearing,…
This is a simple remix of the Backpulver-, Puddingtüten-Halter by Chris0049 . The remix was done in PrusaSlicer. No fancy CAD design. I posted my make at Chris' part and was asked for the stl-file. Therefore I publish this simple remix.…
this is aan action figure stand for 3 of your figures!!
Tripple splitter Bambulab with PC4-M10 pneumatic connectors
First off, I am only using Klipper so I know nothing of Marlin. All my config examples are meant for Klipper only . But you can use the values to adjust your settings in Marlin. This bracket is a (near) drop-in replacement for the…
Holder for up to three oral-b iO toothbrush heads. The heads hang freely, so water can drip down and the full head can dry.
Print Back arm upside down Left Arm and mirror of left arm (to make right arm) Modifications include: 1. Holes for access to rail screws 2. Holes with hex nuts instead of heat inserts 3. All models are for 12C carriage
Made in Fusion360, I can send design files; if needed Print it from whatever you want, PLA, PETG, or even PEEK
This is a remix of the "Double Lens Cap Holder with Fillets" designed by guymaker published at thingyverse (https://www.thingiverse.com/thing:3085798) Designed in SCAD. You can create a stl for a single, double or tripple lens cap holder…
Replicated a design seen online shopping
These simple 2 color geometric triangles are the modern decoration you didn't know you needed. These prints are quick and thin, as they are decorative items. With a bottom layer (white) at 1.5mm height, and line art (black) being 1mm…
I modified the print to be able to attach it to my computer desk which is the Linnmon from Ikea (34mm). Also added two more loops for more cables :D ** Update 08/06/2020 v2 Added a new version with a tighter fitting (33.5mm) for the table.
Build plate holder for Anycubic Kobra S1 build plates. Size: 250mmx250mm. This one has three cases and is a bit wider than the original version.
Ein neuer Halter für die Makita Akkus ist entstanden. Lange ist es her wo ich den einfachen halter euch zu verfügung gestellt habe und nun endlich gibt es ein update, für 3 Akkus! Akkus reinblicken und anschließend mit zwei fingern den…
A smaller blaster for transformers with 5mm hand slots
A nice vase with three different directions of the opening. The place for the water is one single place, it is connected that you only need to fill in water in one of the openings and all three vases will get water. Take a look at my…
Simple adapter to permanently connect a lamp to a DC power source.
I remixed it to fit a triple-A battery holder for extended battery life.
After seeing the power of reversible hinge, I needed a way how to move parts that need to have more freedom of movement. In my case it was a lid of a box (can be seen on the pictures). With this configuration can box and lid be moved up…
This tripple Joy-Con Grip and Strap holder is a remix as requested by a user. I did not print this, but the settings can be taken from the original:…
I created a simple stand for 3 devices. In my case: a Macbook Air iPad Pro Boox Nova Air 2 ereader The Macbook back has extra support just in case. Easy compact storage and charging of multiple devices to keep my desk clean and organised.…
Just simple tripple earrings. My printer doesn't always print the best quality, but that's due to my settings and printer, I'm sure your printer will doe a much better job! Enjoy this simple file! (if you want, you can use it commercially…
A nice vase with three different directions of the opening. The place for the water is one single place, it is connected that you only need to fill in water in one of the openings and all three vases will get water. Take a look at my…
Summary With this holder, you can mount cork coasters under your kitchen cabinets (wall cabinets) and have the coasters quickly at hand when cooking! Material-saving, fast printing without supports! Less than 25g of filament / about 1 hr…
Nice shaped pen holder for up to 3 pens of max. 15cm width and 15mm thickness. In the back there is an additional compartment for small things like paper clips, cutters and other stuff (see pics) Enjoy & have fun! Material: PLA…
3x 25.5mm gluestick holders for the Skådis Pegboard. Idea for Creality Gluesticks. Print with supports for the pegs
Stepper Motor Plug for K1 Max Tripple Z to cover hole for stepper motor wiring. Category: 3D Printer Parts
wallmount to store 3 Hilti SFBxxx NiMh Akkus
Holder to 3 3,5" HDDs with holes in it. Its basicly only for storing unused HDDs
At night we leave all our phones downstairs and of course we want them to be charged in the morning. Since I don't like the cables being scattered around the charging table I created this small phone stand with cable holder. I made a…
this is a 15mm riser for the Gira Standard 55 Series of outlet and switches Category: Electronics
A mount for up to 3 ELFBAR vapes. I mounted it on the bottom of my monitor-raiser but you can also mount it under a desk.
This is a bottle holder that offers place for up to three Germany 0,33l bottles. You can print it in one piece and there is no need for support in the screw holes. Video: https://www.tiktok.com/@bastelsaal/video/7179591047394184453 You…
This model cannot be printed using vase model. You can print the presliced model so all settings are dialed in. The presliced model is 117mm x 120mm x 150mm big. If you want to slice the model yourself, you should use 3 or more perimeters…
This is just a improved version of the urban arrow drink holder with modular parts.
This is a school project of which i went totally overboard and made over 40 iterations optimizing the design with CFD. I think schools could use this design to teach students about aerodynamics as well. Or the curios person can try it for…
Holds 14 eggs in a tight pattern Assembled size: 22.5 x 12 x 2.2cm Print two halves each: 11.25 x 12 x 2.2cm Tested with PLA but anything should be fine Only 36grams of PLA needed Should not be lifted while full because the center…
For using the Sw-Motech USB device I createt a Mounting Thingebob, that can sit on tScrews of the Fueltank. This is the Part I used PETG, for when something does go wrong, that there is some “give” Supports are also needed. The Gcode File…
Holder for two 9mm and three 7mm 2,5" HDD/SSD for Dell T5500 and compatibles. Category: Electronics
I printed it with 20% infil and 3 walls. Not sure you need that but I'd rather it take some abuse. Great original model by Chadam makes this perfect for french cleats.
Fixed tripple base. Remix from the Modular watch stand by PRINTSY
I Reamixed it from a Dual mount to a Tripple Mount because i Upgraded My Anet A8 with a Diamond Nozzle
For this mod you will need M3x8-10 for joining the panels and M3x16-18 for mounting 4020 fans. Everything is secured with M3 nuts. Will also need M3x8 with t-nuts for the panels shelves with use 6mmx8mm magnets (glue in). MAKE SURE TO USE…
inspired by the chowthink armor 3.0 used on ender v2, which i purchased and could not make it fit the v3 se due to direct drive extruder. So not wanting to waste the money i spent on it I set out to design my own mount using the 3, 3010…
Ship 4 V2 3 times bigger Category: 3D Printing
I liked this model, so i remixed it double and tripple stacked for my purposes. My setup is a three stage filter process: Cotton for first dust wipe Closed cell sponge/foam material for small dust and cotton dust if there is any Fillament…
Commander Box Dual and Tripple Top Deck Loader. For 2-3x Ultra Pro Regular Toploaders.
You will need two T-Clips from Here for Skadis: https://www.printables.com/model/256896-skadis-t-clip-system Added V2 with besser Moint Position to Prevent bending.
use for projects that need a battery housing. use with 2 thin battery terminals, mine are 10x9x0.27 RESIZE THE X TO 25 WITH UNIFORM SCALE. this is because i designed it using cm when in reality i needed mm
I really liked how https://www.printables.com/model/765011-x1c-nozzlecomplete-assembly-multiboard-mount/comments printed and accounted for the cables of a full assembly but wanted to have more than one on each connector. Print upside down…
This 3D printable storage container features a secure screw-on lid 1/4 turn easy on easy off Designed for both style and practicality, the threaded lid provides a snug, reliable seal to keep contents safely stored. Perfect for organizing…
Three small baskets for little things on your desk
Einer meiner ersten Versuche ... / One of my first tries ... Bei unserem alten Hailo-Dreifach Mülleimer brach die Brücke auf einer Seite, in welchen der mittlere Eimer eingehängt ist. Habe die Brücke entfernt, so dass an jeder Seite noch…
This 3D printable storage container features a secure screw-on lid 1/4 turn easy on easy off Designed for both style and practicality, the threaded lid provides a snug, reliable seal to keep contents safely stored. Perfect for organizing…
![Tripple & Double Fillament Filter Pipe cleaner extruder upgrade for Prusa Mini and for PTFE extensions PC4-M8 [REMIX]](https://media.printables.com/media/prints/488505/images/3986934_2c90cb34-f098-4b67-9f9d-ea93ec29b88e/asdasdas.png)
