45 models
Festool FastFix Centrotec holder - simplify your tool management Where do you currently store your FastFix Centrotec adapters? Print your own Festool FastFix Centrotec holder and make your everyday work easier and more productive. Don't…
❄ Boosting the Efficiency of a Single-Hose Portable AC – Up to 30% Improvement! I thought I’d share my experience in case others are facing similar issues. I have an Airwell MFH012-C41 portable air conditioner (same principle applies to…
Original unit hose adapter broke, this is just a replacement with 3D Printing in mind. Has pretty tight tolerances so make sure your horizontal expansion and all that is properly tuned. Print in a material thats not PLA as it might deform…
Centrotec holders for alle centrotec chucks. The small ones comes in 3 options Hole in the middel to attach it with one single screw. (my favorite) Hole in the middel and 3 screw holes around it for attachment. Hex shape in the middel (so…
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
An intake hose adapter for the portable AC to increase efficiency (a lot). Designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same… the bayonett catch can be found here (150mm) update 2026-07-08:…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
Fancy brackets for you PDC and its equipment Festool PDC 90° and very slim Holder Festool Akku Pack Holder Festool Centrotec Holder Festool angle attatchment Holder Simply screw it in some wood or sth. else and you have a slim place for…
AC duct adapter to convert your single duct AC into a two duct one to improve efficiency. Specific AC model is Trotec PAC 3500 S, but there seems to be a lot of similar models from different companies as well. The white connecting part…
designed for Trotec PAC3500S remote control, but should fit on many others brands, which are most likely the same…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
Adapter für größere Schläuche mit 3 Schnapphaken am Anschluss des Schlauches und 142mm Durchmesser. Passend zu meinem Durchführungssystem um die Klimaschläuche möglichst ohne Luftverlust durch eine Platte am Rollladen zu führen.
Schnellkupplung für den Schlauch eines Klimagerätes (hier Trotec PAC 3800 S Der Schlauch kann in der Rolladenplatte per Bayontettverschluss befestigt werden. DAmit kann zwischen mehreren Räumen schnell gewechselt werden. Ich werde noch…
Wanted to use my Centrotec bits with my Milwaukee Drill. Made an adapter. There are 3 parts to print. I started by printing all in PETG but ultimately printed the main part in stainless steel via Shapeways here . The other 2 parts (the…
Hey! Ich habe ein Gehäuse für den RetroScart Switcher von PCP Retrotech entworfen, da ich es nicht mochte, dass die Platine ungeschützt war und sich beim Einsetzen der Scart-Kabel leicht verbiegen ließ. Um dieses Problem zu lösen, habe…
WIP Remix of arca swiss plate and top bracket for better heated insert fit. Inserts are pressed into opposite side from which they will be pulled to help avoid pullout in case you have junk inserts like me. After pressing in the heated…
Wanted to use my Centrotec bits with my Milwaukee Drill. Made an adapter. There are 3 parts to print. I started by printing all in PETG but ultimately printed the main part in stainless steel via Shapeways here . The other 2 parts (the…
Please share infos about your print experience so I can add them here. I would print this in ABS or PLA or anything and the small hole to the top.
I misplaced my hose with the adapter attached. Since attaching a new hose requires the adapter and Trotec's shipping would take weeks, I created this adapter myself. I'm not sure whether other AC units use a similar adapter. In principle,…
You just need to drill 4 M4 holes in the plate with which you want to “close” your window. Then print the part and attach the outflow tube of the aircon with the adapter. You should be well prepared for the next heat wave- no matter if…
PLA mit Buildplate support, 15% Infill
template for drawing electrical signs / předloha pro kreslení elektrotechnických značek
A bench stand for the Trotec airgun - prints without supports and attaches with 3 screws
Printed the original model to figure it doesnt exactly fit mine. Redraw it as close i could but it's far from perfect. You will have to do mild plastic trimming here and there. This fits only Trotec PAC 3500 SH I've used large inserts…
Retrotec 4” plugs for series 5000/6000 fan Range 29, 47, 74 Printed and tested in PLA with a rubber seal on the back for better air tightness Should work ok with TPU Category: Replacement Parts
Odvlhčovač obsahuje od prodejce pouze základní filtr proti hrubým částicím. Vytištěný rámeček umožní dodat vlastní filtr, např. uhlíkový nebo mikrofiltr. Pro tenké filtry obsahuje ještě vnitřní přítlačnou vložku, pro tlustší filtry není…
Created by me for the remote control shown in the pictures.
Bahtinov mask for diffraction focusing of at60ed
This is a replacement AC unit to hose adapter for my Trotec PAC 2000 E portable AC unit. It came with a non-standard 145mm clockwise hose, annoyingly, and I wanted to use a longer 150mm diameter hose with a counterclockwise screw thread.…
This is a magnetic insect screen for Trotec Wall Air Conditioners. You glue the magnetic ring with adhesive e.g. silicone to the Trotec wall outlet and then you can clip the insect screen over the complete outlet. What you need for the…
I have an old Trotec laser engraver. It was built in 1998 and worked quite well until this summer 2023. So I would say that it was a very reliable machine but it now suffers from its old age: laser tube is dead software is very very old…
This is a replacement adapter for connecting the Trotec AC window outlet for my Trotec PAC 2000 E portable AC unit to a standard 150mm counterclockwise hose. I printed mine with a 0.6mm nozzle with 3 walls in PETG, and I highly recommend…
A simple organizer to store various laserable material samples from trotec
WOODWERD Centrotec Bit Holder is great for keeping your long bits organized on your belt. The build has 2 parts. One part (clip) is printed at a leaning angle for the best performance Parts are: MAIN (Main body) -Looks like 2 parts but is…
Žáci si společně zopakují elektrotechnické značky používané ve fyzice 6. třídy a poté každý vytvoří dva válečky- jeden se značkou a druhý s názvem součástky .
designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same…
Boxes and inserts for the S76 systainer. The magnets for the holder are 2x5 round and are pressfit in the bottom. Use a flat screwdriver to press them in. The printed labes just slide in the slot, the idea is to print them in two colors…
Rugged case for TROTEC BM31 Moisture Meter/ Moisture indicator This case has some some space for a battery. This allows you to store either a spare battery or the main battery in case you do not want to leave it in the device.
An Adapter to route the cold air to another room. Designed for Trotec PAC3500S, but should fit on many others brands, which are most likely the same… Tested with PETG and a 300mm film tube. The flap needs to be removed. The amount of air…
Rugged case for TROTEC BM31 Moisture Meter/ Moisture indicator This case has some some space for a battery. This allows you to store either a spare battery or the main battery in case you do not want to leave it in the device.
🇬🇧 English Description Wall Mount for Trotec Electronic Pressure Switch This is a sturdy mount designed to securely fix the Trotec electronic pressure switch (e.g., TDP series) to a wall or panel. It helps to organize your garden pump…
I've bought Trotec dehumidifier and I needed to change a filter. The thing is like 30 euros so I made this filter adapter that is using VW Golf 7 cabin air filter that is around 10 euros :)
Adapter for the Trotec PAC 2300 X. The idea is to mount the air conditioner directly onto a wooden panel in the window in order to prevent negative pressure in the room.
Reverse-engineered intake cover for the Trotec PAC 3501 S with a hose connector for a second hose. This lets you use the AC in a dual-hose setup. The connector is a tapered cylinder with an outside diameter increasing from 147 to 150 mm.…
