Trotec laser retrofit with 40W CO2 tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have an old Trotec laser engraver. It was built in 1998 and worked quite well until this summer 2023. So I would say…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I have an old Trotec laser engraver. It was built in 1998 and worked quite well until this summer 2023. So I would say that it was a very reliable machine but it now suffers from its old age:
- laser tube is dead
- software is very very old fashioned and runs (tries to run) under windows 95 operating system
So it was time to trash this machine... But it looked so professionnal that I decided to refurbish it with more modern electronics.
- As I am an hobbyist I couldn't afford to buy a new RF laser tube, so I decided to change it to a cheap 40W CO2 tube
- As I love ESP32 and micro controllers I decided as well to design my own controller boards based on GRBL FluidNC software.
Follow this project to see how all this can work as expected !
Result here : https://youtu.be/0KS32yQQGEo
Full project is open sourceOpen hardware and accessible on my Hackaday's project page : https://hackaday.io/project/193893-retrofitting-an-old-laser-engraver
Category: Electronics