36 models
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
These decorative stars look wonderfully festive without seeming too present. They are easy to produce and can be printed in a short time. Inside there is a shelf for an LED tea light. The standard dimensions are 130mm x 125mm x 50mm and…
Make these holidays harder than they have to be, with so many squiggly pieces demanding to become a star! The puzzle is generated by dividing a star into similar regions, and running a differential line growth simulation on the resulting…
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Bouncy Buddy: Twinkle X-mas Reindeer! This little reindeer is here to bring holiday cheer and a whole lot of bounce! With its playful design and wobbly head, it’s the perfect mix of fun and festive. Great as a gift, decoration, or just a…
This was a tricky one to fit, and there is a few mm of lid lift depending on how well you can smoosh down the bag. Keep the star tiles in the bag and fit them into the empty space. Two different lids for the UFOs, one fits tighter but…
This is a figure model of Twink from Rainbow Brite and can be used to make any of the Sprites or your own color choices. This model comes in multiple pieces that use pegs and glue to fit together. You will absolutely need to use glue for…
Winkel zur Herstellung rechtwinkliger Verbindungen. Ich habe es beim Bau eines Gehäuses benutzt um die Holzplatten von Innen zu befestigen. Somit bleibt die Außenfläche unbeschädigt. Weiterhin als Bodenhalter nutzbar, für Einlageböden in…
Advent Calendar - Door 3 12min Blitzprint Vase/Spiral Mode Creates wonderful reflections part of a "Super Fine Art" series photo: Prusament Vanilla White printed on an MK3S Print instructions Based on Standard Settings 0.15 @MK3 QUALITY…
Introducing the "Twinkle Tamer" Christmas Light Spool – the holiday hero you didn’t know you needed! Tired of wrestling with a tangled mess of Christmas lights every December, only to end up looking like you lost a fight with a…
Gedruckt wurde auf einem Prusa MK4 mit 0,4er Düse, PETG. Die Größe kann je nach Bedarf im Slicer angepasst werden. Die Version auf dem Bild wurde mit 110% der Größe gedruckt. Stützen war eingeschaltet.
angepasst für Twinkly Strings 250 er Lichterkette How I Designed This Für 250 Twinkly Strings 250 er RGB-W steuerbare LED Lichterkette Habe die Idee aufgegriffen und für 10 Kästen mit 5 x 5 LEDs angepasst. Damit kann ein Bild bzw. ein…
Print, plug, and play! It’s a good idea to start with the test print first to check if the lights fit properly. Material: PETG Size: 230x200x6mm Twinkly: Strings Multicolor / 600
Twinkie The Kid from the best snacks out there
I modified the canopy to fit a pan servo, and I added a mounting plane with screw holes to mount the Walksnail VTX to the top. By mounting the VTX outside you make more space for a larger battery beneath the canopy. I can fit a 4S 21700…
Gegenlichtblende für das Nikkor W-Nikkor 1:1,8 f=3.5 cm Weitwinkelobjektiv für die Meßsucherkamera. Da ich dieses Objektiv - leider - nicht selbst besitze wurde das Modell mit geduldiger Hilfe anderer Personen, welche mir die Abmessungen…
Extra or Replacement Twinkly Flex Holders The Twinkly Flex does not seem to carry a lot of holders for complex designs to place on the wall. I had needed more and designed these. Unfortunately, its hard to get an equally transparent…
I made a "lampshade" that slips over the head of these IVY LED desk lamps I have
This is a tray for the star tiles in Twinkle Twinkle so that the tiles can be stored separately from the draw bag. Print the original organizer and then the star tiles tray from here.
Das ist eine Halterung für die Weitwinkelkamera (RB-CAMERA-WW) des Raspberry Pi. Das ganze kann man am Drucker über kleine Magnete (5mm x 5mm x 5mm) befestigen. Print Settings Printer: MK3s Rafts: No **Supports:** No Post-Printing…
Simple bathtoy of Twinkle Twinkle Star for kids. Recomended to print with PETG.
Twinkle Twinkle. Insert for all the expansions and upgrades Each type of tile is separated for ease of setup.
Original canopy mounts DJI air unit inside the canopy. In that setup, it gets overheated very quickly even during high speed flight. I've updated the canopy to mount air unit on top of the canopy. There is a big hole under the air unit…
Print as surface mode at least 2 walls
The slit has dimensions of 18x1 mm, and the hole is 2 mm in diameter. I will add the .ipt file for further customization. Print Settings Printer braBrandnd: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 mm Infill:…
I didn't want to use double-sided take directly on my flight controller so I designed this mount for the FC and a cooling fan. This way I don't ruin the bottom of my FC when I try to remove it, and I have a secure mounting point for a…
Bring back the magic of the 1980s with Twink the Sprite , Rainbow Brite’s loyal and cheerful companion! This display figurine features Twink in a joyful, dynamic running pose atop an integrated display base. Perfect for retro cartoon…
So basically i have a better design and i completely messed this one up wait for V2. or let's pretend this didn't exist and it's gonna be called V1 :3 You need TPU, a rigid filament and a filament you deem sufficient for the pin, you are…
A simple star powered by a SeeedStudio Xaio RP2040 using the onboard NeopPixel. My printer handles overhangs well; I printed this as orientated in the STL file with a big brim on each 'foot' and supports enforced for the first 10 layers…
StarOne - a twinkle twinkle little star! After creating the PrismLume and GeodeSick RGB sphere , I decided to challenge myself: learn some 3D CAD and design a similar device—this time in the shape of a star . I named this project Star One…
A unique 3D printable creation — this Star Shaped Night Light Cover, Fits Led Tea Light, Twinkle Stars, Bedtime Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Twinkle Sprout is a round fluffy one-eyed monster with a tiny star-flower on its head and a wiggly 11-joint fur tail. CUTE, FAST AND FLEXI Print-in-place fluffy tail with 11 joints that bends in every direction, no assembly, no glue 1…
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Highly detailed dual scimitar set inspired by the iconic twin blades wielded by Drizzt Do’Urden. This model set includes Icingdeath and Twinkle, designed with elegant curved blades, ornate guards, and sculpted handles for both…
