1 / 3
Twinky FPV plane FC mount with 35mm fan — image 1
1 / 3

Twinky FPV plane FC mount with 35mm fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

mount for flight controller and 35mm fan for the SkyGlide twinky 3d printed plane.

Rating
0 / 5
Likes
4
Downloads
13
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I didn't want to use double-sided take directly on my flight controller so I designed this mount for the FC and a cooling fan. This way I don't ruin the bottom of my FC when I try to remove it, and I have a secure mounting point for a 35mm cooling fan.

I mounted my fan blowing away from the FC as there will be air coming in from the nose anyway which will probably just make the fan pointless. This way, the fan blows with the existing airflow which should provide good cooling.

There are two versions: a 20x20 mounting version for most flight controllers and an 18x22 version for the Speedybeef405 Wing Mini.

For mounting into the fuselage, use a little bit of double-sided mounting tape underneath the fan bracket and just use two M2x8 screws in the front.

For mounting the FC, use M2 screws, and use M3 screws for the fan.

This mount should work with any other planes with 20mm mounting points.

Print in PLA or PETG.

 

Tags