Search results: tx2

Sort order

58 models

P
PrintablesDarkstar Arms

TX22 Weighted Backplate and Accessories

This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…

Downloads
500
Likes
24
Rating
5
P
Printablesscooter_magavin

Taurus tx22 magazine loader

This is a magazine loader/speedloader/thumb saver for my Taurus tx22. It fits all models of the taurus TX22's (standard, competition and compact). No support needed. I added a hole in the wing for a key ring after I printed it so it's not…

Downloads
422
Likes
24
Rating
5
P
PrintablesVinny0769

TX22 extension

This is for adding 8 to your TX22. You will need to get a longer spring and a screw for holding the base in place. infill 15% gyroid .16 layer. https://www.blackdogmachinellc.net/5pk-9heavyspring.aspx

Downloads
383
Likes
25
Rating
5
P
PrintablesDesmoDog

TX22 Compact Mag Spacer for 16 round mags

This is a slip-on spacer for use with full size 16 round magazines in a TX22 Compact. Nothing holds it in place other than friction, easy to remove if you're sharing mags between different TX22's. The photo of three mags shows (L-> R) the…

Downloads
371
Likes
18
Rating
5
P
PrintablesRacoon Dev
18+

The source marked this model as adult content.

Downloads
321
Likes
54
Rating
5
P
PrintablesRuben Hauwaerts

Screw cover TORX 20 (TX20)

This torx screw cover will hide every TX20 screw head! just pop it right in. Normally you buy a paket of these in your hardware store if the old ones break, but due to 3d printing there is no need for that, now you can just print a…

Downloads
308
Likes
24
Rating
5
P
PrintablesFPV Smitty

Taurus TX22 Compact Mag Sleeve

Wanting to use Taurus TX22 full size 16 round mags in your TX22 Compact? They fit, but leave a gap between the top of the floor plate and the bottom of the magazine well. Does that bother you? Me too, so I wasted a lot of time coming up…

Downloads
263
Likes
27
Rating
5
P
PrintablesTj Barr

TX22 seer pin remover jig

Holds the trigger group in place so you can tap out the seer pin and install the pin.

Downloads
243
Likes
18
Rating
0
P
PrintablesMatthew Pond

Taurus TX22 ProMag Sleeve

I made this to enclose the lower portion of the 34-round magazines made by ProMag. They always looked a but funky to me so i made the lower portion look more like the grip of the gun itself.

Downloads
235
Likes
8
Rating
5
P
PrintablesMail4courage

Taurus TX22 Spring retainer

Made after losing one. Hope this helps.

Downloads
191
Likes
17
Rating
0
P
PrintablesBrennon Baxter

TX22 Mag Follower Pin

This is a pin for the mag follower of a tx22, I used the Pin from the 16 round mag to get the measurements. Functions well, printed on a bambu labs printer with .08 resolution.

Downloads
191
Likes
13
Rating
0
P
PrintablesRanger

TX22 Mag Loader

Now with a nice tight fit on the mag. This works like the factory loader now, with a little larger exterior that might be easier to handle for you.

Downloads
164
Likes
20
Rating
5
P
PrintablesBussey Bank

TX22 ProMag 21 Round Cover

The Taurus TX22 magazines have an extended portion that covers the bottom portion of the magazine. Unfortunately, those are very hard to come by recently, but the ProMag 21 round magazines are not as hard to find. Everywhere online says…

Downloads
132
Likes
10
Rating
0
P
PrintablesTeddan85

Taurus TX22 Remixed to be smooth

Who doesnt love the Taurus TX22?!! I Printed my remix this night and it looks wonderfull and smooth!! Thanks again to @Racoon Dev for sharing the .Step file <3!!

Downloads
118
Likes
12
Rating
0
P
PrintablesYoshimi Koyama

Jetson TX2 case cover

Characteristics: Has access to many common ports that you may use frequently. Include: 4 tactile switches, J21 and J26 GPIO headers, SATA port, heatsink and fan, onboard camera, LAN port, SD card reader, HDMI port, USB3.0 port, micro USB…

Downloads
118
Likes
1
Rating
5

TP-Link Archer TX20U plus wifi USB adapter wall holder

My customer needs usb wifi solution, this wifi 6 adapter fits our reqs, but we need to hang it to wall near pc instead typical desktop placing. So i ve made this simple hanger. Prints in one hour, simple design, 7m of filament. Printed on…

Downloads
115
Likes
7
Rating
0
P
PrintablesRacoon Dev

Taurus TX22 RMSC Red Dot Adapter Plate V1

6/15/26 Finished version 1. 11/10/26 Just had a plate shear off, it seems the dovetail wasn't doing much and the counterbored hole ripped out, a bigger screw may have prevented this. I don't have time to fix this currently, so watch out…

Downloads
104
Likes
10
Rating
5
P
PrintablesFabri91

120 mm fan support for Asus Dual RTX2060 Super GPU

Support to install two 120 mm fans on an Asus Dual GeForce RTX 2060 Super using the mounting holes of the stock shroud. Requires M2 inserts to be inserted into the base of the posts to be used with the default mounting holes and screws.…

Downloads
97
Likes
9
Rating
0
P
Printablescredmontgo

Anemometer for TX20 Weather Station

Modified the original Anemometer cup design by PlasticyBits for the TX20 La Crosse Weather Station. Had to lower the cuts to clear the housing, and angled the ends for a better fit in the dome. . Also had to move the magnet slightly,…

Downloads
84
Likes
9
Rating
0
P
PrintablesZofo

Taurus TX22 EZ Loader

This is made for a friend with some finger dexterity issues, for his Taurus TX22 16 bullet magazine. It allows him to easily load his magazine with better control.

Downloads
66
Likes
11
Rating
0
P
PrintableslilFonsi

Taurus TX22 spring retainer (Canadian version)

Taurus TX22 spring retainer. This retainer limits the standard mag to 10 rounds To comply with the Canadian limit. I took the measurements from the original retainer. You can find the files for the mags in many places including…

Downloads
61
Likes
4
Rating
0
P
PrintablesRickeyB

Multiboard Magazine Holder. M&P Shield-2 9mm/45cal, Glock G43 9mm, Taurus TX22

S&W Shield-2 9mm & 45cal, and the Glock 43 mags work perfectly. Taurus TX22 has a wider base, it will not allow side-by-side storage. The single holder version works great with the Taurus. The prints are a better way to store firearm…

Downloads
59
Likes
8
Rating
0
P
PrintablesNikki81

Air Arms TX200 e clip removal and fitting tool

Air Arms TX200 cocking lever e clip removal and fitting tool infill 100% The clip needs to be rotated so the open side is up then put the tool over the clip and put your finger on the end to stop it slipping of then just pull. To refit…

Downloads
59
Likes
2
Rating
0

Antigravity ATX20-HD Battery Holder for S550 Mustang 2015-2022 96R 99R

Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…

Downloads
58
Likes
3
Rating
0
P
PrintablesJohn Smith

tx22 slide standard backplate

backplate for a Taurus tx22, print standing up with supports for best strength

Downloads
56
Likes
1
Rating
0
P
PrintablesMortalWombat
18+

The source marked this model as adult content.

Downloads
54
Likes
9
Rating
5
P
Printablespietjepuk

Gridfinity 1/2 no name Torx tray TX25-70 socket holder

A gridfinity tray for 8 no name 1/2 torx bits t25-t70 will probably fit many other sets and sockets as well.

Downloads
53
Likes
9
Rating
0
P
Printablesanti_rice

HSW - Taurus TX22 Magazine Holder

ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models Taurus TX22 magazine holder for the Honeycomb Storage Wall. Holds 4 magazines. Print details (as pictured): Printer: FLSUN V400 Filament: Duramic white…

Downloads
52
Likes
9
Rating
0
P

TX22 Docter_Noblex Red Dot Mount

Print on side with angled portion of alignment posts facing towards the build plate Required Original Mounting Screw 2 - M3 Heat-Set Inserts/M3 Nuts 2 - M3x6 SHCS Recommended Settings .1mm Layer Height 4 Walls 99% Infill PLA+ Or Better…

Downloads
50
Likes
3
Rating
0

Sovol SV01 Pro FanDuctX2

FanDuct to help cooling your prints. It uses two 5015 blower fans, that should be enough to cool your prints. be carefull, you need to modify your printer. to add the second blower fan, you need a y-adapter or add a seperate wire you need…

Downloads
48
Likes
12
Rating
0
P
PrintablesTeddan85
18+

The source marked this model as adult content.

Downloads
45
Likes
11
Rating
0
P
Printablesegoms93

Jetson TX2 Developer Board Cover

Moved some cutouts to fit the developer board

Downloads
44
Likes
2
Rating
4
P
PrintablesSoso

Liftmaster TX2/4EV remote replacement shell

This is a replacement shell for the LiftMaster TX2/4EV remote, designed to work with the original rubber buttons and screw. Two versions are available: a solid model and one with a small cutout for viewing the LED indicator. For the…

Downloads
28
Likes
0
Rating
0
P
PrintablesDesmoDog

Mag Loader for Taurus TX22

I got tired of looking for a black loader in a black range bag so I copied the stock part and printed it in yellow. Nothing fancy here, print with supports.

Downloads
25
Likes
2
Rating
0
P
PrintablesSgt_Sid

TX22 Mag Loader - Mounting Hole

This is an update on the TX22 Mag Loader from @Ranger_2539205 with an added Mounting Hole. This is a remix; however I can't add the remix info. Please check out the original at: https://www.printables.com/model/1384859-tx22-mag-loader

Downloads
20
Likes
4
Rating
0
P
Printablesps915

Technoline TX29DTH-IT Sensor Sticky Clip

A simple clip for the Technoline TX29DTH-IT temperature and humidity sensor. You can stick it on smooth surfaces such as tiles. I am using 3M VHB. Category: Electronics

Downloads
20
Likes
0
Rating
0

LiftMaster TX2/4EV remote holder

A simple holder for the LiftMaster TX2/4EV remote. that I made with the intention to mount with doublesided taped in my car but still being able to change the remote batteries. I printed with the settings: 0.2mm layers 3 wall loops, 3…

Downloads
18
Likes
0
Rating
0
P
PrintablesKaza1

Craftsmen TX2028 Housing

Replacement remote control housing that fits the tx2028 this model does require the original buttons and a m3 screw insert.

Downloads
15
Likes
0
Rating
0
P
PrintablesFábio Gil

Power Switch ATX24 Adapter Case

Are you accustumed use a paper clips to make jumper "PSOn" pin (green wire) to Ground (black wire) on Power Supply ATX for test it, right? Yes, I guess. Now, with this project, you don't need to do this never more. You can turn your power…

Downloads
13
Likes
3
Rating
0
P
PrintablesDinther

Housing for Magic button MBTX4-W - MBBTX4 - MBTX2

housing for magic button model: MBTX4-W - MBBTX4 - MBTX2 My garage door remote was crushed so I made a new one. Included is the openSCAD file and STL file and .3mf file. Prints well with any nozzle and material and requires no support at…

Downloads
12
Likes
0
Rating
0
P
Printablesburdickjp

YTX20HL-BS Battery Bracket

A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…

Downloads
10
Likes
1
Rating
0
P
Printablesaldric

Moddiy ATX2ATX mount

I got a couple of these state sync boards from moddiy.com but couldn't find any mounting brackets or plates for it. So here is a rudimentary one that should fit. The boards usually arrive a bit bent inwards due to soldering pressure when…

Downloads
10
Likes
2
Rating
0
P
Printablestaiguy

TP-Link AX1800 Archer TX21UH Wall Mount

I am using a TP-Link Archer TX21UH USB WiFi adapter and wanted to get it off my desk and away from other interference. This tray holds the adapter using some double sided tape (the weight of the cable will pull the base out of the tray…

Downloads
8
Likes
0
Rating
0
P

LA Crosse TX29U TX50U Temperature Transmitter Holder

Really simple design. The old locking clip mount breaks easily so I just made a holder to sit it in. Probably not ideal for outdoor use but for indoor use it will work great. It has 2 holes in it for drywall screw mounting. You can also…

Downloads
8
Likes
1
Rating
0
P
Printableshondabf15

Clip Midland BTX1 PRO / BTX1 / BTX2

Clip per fissare l’interfono Midland BTX1 PRO, compatibile anche con BTX1 e BTX2 Clip to secure the Midland BTX1 PRO intercom, also compatible with BTX1 and BTX2.

Downloads
6
Likes
0
Rating
0
P
PrintablesBlammerman

Taurus TX22 Tall Wall Display, Suppressor Ready

the ironing is awful if someone wants to fix it. my nozzle is messed up so i cant dial that part in im creating more for these models . also THE PHOTOS OF THE TABLE MODEL WERE ACCIDENTLY UPLOADED AND WILL NOT LET ME REMOVE THEM Glock 43x…

Downloads
5
Likes
1
Rating
0
P
PrintablesCode-Sandbox

TX22 Mag Base for Mod Rack (v1)

Custom Magazine Base for Taurus 22LR Magazines

Downloads
3
Likes
0
Rating
0
P
PrintablesAlex.

Clé canon TX22

Cette clé permet de démonter l'embout du canon et de monter l'adaptateur pour le réducteur de son . Et visse Versa .

Downloads
0
Likes
0
Rating
0
P
Printableslostinacrowd

TX22 loader mod

The original snapped. The wings were too thin. I made it thicker.

Downloads
0
Likes
1
Rating
0
P
PrintablesAndy L

Lenovo m720q tiny - TP-Link TX201 PCIe baffle

This is a PCIe card baffle for TP-Link TX201 2.5G ethernet card for the Lenovo M720Q and similar Tiny PCs. I printed it in PETG 20% Infill.

Downloads
0
Likes
0
Rating
0
P
Printables

YTX20HL-BS Battery Bracket

A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…

P
Printables

Antigravity ATX20-HD Battery Holder for S550 Mustang 2015-2022 96R 99R

Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…

P
Printables

TX22 seer pin remover jig

Holds the trigger group in place so you can tap out the seer pin and install the pin.

P
Printables

TX22 Mini Thread Protector

Basic thread protector sized for the Taurus TX-22 threaded barrel extension, but will also work for other applications where a short and thin thread protector is all that is needed. PLA will melt - print in ABS/ASA or better.

P
Printables

Taurus TX22 Remixed to be smooth

Who doesnt love the Taurus TX22?!! I Printed my remix this night and it looks wonderfull and smooth!! Thanks again to @Racoon Dev for sharing the .Step file <3!!

P
Printables

Taurus TX22 smooth lower body

This is my smoothed version of @RacoonDev_1258837 blocky TX22 lower. All credits goes to him!!! I share both his .Step file and my remixed smoothed .Step file!

P
Printables

TX22 Weighted Backplate and Accessories

This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…

P
Printables

LA Crosse TX29U TX50U Temperature Transmitter Holder

Really simple design. The old locking clip mount breaks easily so I just made a holder to sit it in. Probably not ideal for outdoor use but for indoor use it will work great. It has 2 holes in it for drywall screw mounting. You can also…