1,239 models
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Original link : https://www.thingiverse.com/thing:993933/files by 3DWP I've painted the model for the Bambu Lab printer.
Print approx. €19.06–€23.29 excl. taxPreliminary estimate for one variant
Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
This is a Shulker Box from Minecraft , albeit only 75mm cubed rather than 1m cubed =) The dimensions are accurate and the pitch of the thread rises the box accurately too: 50% of the height of the box per revolution, just like in…
Print approx. €18.88–€23.07 excl. taxPreliminary estimate for one variant
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This is hulk's fist goes from broken wall lamp. there has to be zero infill for the fist and 3-5 perimeters. It depends on the color of the pet-G filament. my print is from Prusament PETG Neon Green Transparent,…
Print approx. €7.17–€8.77 excl. taxPreliminary estimate for PETGSource material: PET
Added stem to help keep tip of tube clear upon cap removal
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm)…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
These are a quick, easy mod for your Mini 13! They print with the same settings as well (.15mm resolution). Thanks to Doodle_Monkey for the remix model!
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This is a 3D printed part similar to commercially available caulk tube sealers . Have you ever used caulking or some other sealant gun / cartridge gun tube material, but didn't need the whole tube? This part will screw into the open end…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Týdenní služba na úklid, model je bez jména aby se nechal upravit
Print approx. €8.14–€9.95 excl. taxPreliminary estimate for one variant
This is a bulkhead fitting for connecting flexible hoses to containers. It is designed to allow for easy drainage, since the existing parts I found available didn't allow for good drainage due to surface tension around the inlet. You…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
Made to be attached to a desk/table/shelf between 2.5 and 2 cm thick. I printed it in 0.20 but I guess it is possible to print it in 0.30 and still make the screw work.
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
Adapter na 3/4" hadici, šroubovací průchodka M36 Vrtám díru 40mm, tloušťka stěny nádrže je cca 3mm. Doplnit ploché těsnění s vnější strany , závit netěsní na 100%. Z vnitřní strany není nutné těsnit. Hadici před nasazením nahřát, aby…
Print approx. €8.14–€9.95 excl. taxPreliminary estimate for PETGSource material: PET
Low Poly version of my Hulk. I recommend Orgaic support. Stunning effects in Prusament Mystic Green Print as big as you can and post a picture! xD
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
CZ : Kamarád mě požádal o nakreslení a vytisknutí jednoduchého krmítka pro andulky podle vzoru které používal 8 let. EN: My friend asked me to draw and print a simple bird feeder for budgies based on the model he had been using for 8…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET
Předloha pro vytvoření WiFi tabulky s jménem sítě (SSID) a heslem.
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print with filament changes at each top surface. The top layer of the main letter is 0.8mm before the text outline. Main text is changed after the top of the base layer. .gcode with pauses is attached. I added ½" black magnet tape…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
Jednoduchý stolní držák filamentu pro špulky na boxy z IKEA stolků --- Simple desktop filament holder for spools placed on the enclosure from IKEA tables
Print approx. €15.04–€18.38 excl. taxPreliminary estimate for one variant
Orientační tabulka teplot filamentů. Určeno primárně pro začátečníky v 3D tisku. Doplněna i verze bez očka.
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Hi, respectful Hulk Hogan wwf figure. Childhood icon. Enjoy!
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
Popisovací tabulka k rostlinám. 15cm x 7 cm x 0,03cm tištěno na Mini+ , PETG , 0,20 quality, 20% výplň
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Cedulka na dveře
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
k umístění na dveře
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Přehled výplní které nabízí PrusaSlicer ve verzi 2.5.0, který lze pověsit na zeď. Výplně jsem vteřinovým lepidlem přilepil k podložce. Tryska 0.40 (lepší kvůli textu 0.20), materiál PLA, výška vrstvy 20. Výplně jsem modeloval přímo ve…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Component already rotated for correct print position
Print approx. €4.22–€5.15 excl. taxPreliminary estimate for one variant
Signs: Pig farm, Sweet home (three colours), Prasečí chlívek (tři barvy), wall art (two colours) 24 cm
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
tabulku s nápisem doporučuji tisknout v PETG pro venkovní použití, vrchní vrstva je bílá 1,5 mm potom černá PETG pro viditelnost . Zkontrolovat čistotu bílého vlákna, možnost přenesení zbytku barvy z předešlého tisku .
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Cílem projektu je, aby si žáci vytiskly bezpečnostní tabulku k označení daného nebezpečí, příkazu, nebo zákazu. Tabulka má více barev díky změně barvy ve vrstvách.
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Cedulky s názvy tříd mají jen jeden štítek na kolíku. Cedulky s plodinami mají tři štítky: český název, anglický název a 3D obrázek plodiny. Kolíky jsou vytištěny ve dvou dílech, které se slepí pomocí spojky. Horní část kolíku má jeden…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Žáci si osvojí modelování v Tinkercadu, vytvoří si tabulku na násobení a kostičky s příklady.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant
jedná se o prázdnou cedulku kde si můžete v programu (např. tinkercad) dopsat vlastní text nebo dopsat např. permanentním fixem.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Tato cedulka byla originálně určená na hromadnou školní akci.
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Nastal čas ukázat šéfům že laminovačka a papír jsou už out
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Generujte si tisk nejlépe ve dvou barvách. Lidé stále víc kašlou na opatření, i když zdravotníci padají na hubu.., a proto to tu tak vypadá…Prosím Vytiskněte si aspoň jednu tabulku a vyvěste kam je třeba a pošlete ji i známým !! Díky moc.
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant
Cedulky na dveře
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Overview Sick of loose screws rolling off your workbench or half-used resin bottles cluttering your space? DriftJug is here to bring order to the chaos! This versatile 3L container keeps bulk materials sealed, organized, and—best of…
Print approx. €10.74–€13.13 excl. taxPreliminary estimate for one variant
Brakowało mojej żonce zatyczki bo gdzieś koty zgubiły - tak twierdzi moja prawdomówna żoneczka - dlatego zaprojektowałem i wydrukowałem tę zatyczkę na szpulki dla mini maszyny do szycia.
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Two versions in English and two versions in Czech language. Dvě verze v angličtině i češtině.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Printed in PLA at 0.2mm layer height. COB LED Light stip is self adhesive: Aclorol USB COB LED Strip Light 1M Dimmable LED TV Backlight High Density Cold White Flexible Rope Light with 1.5M USB Powered for Under Cabinet Wardrobe Bed…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Žáci po domluvě s učiteli matematiky se rozhodli vytvořit tabulku malé násobilky pro žáky prvního stupně nebo i pro žáky s poruchami učení na druhém stupni.
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
Žáci si vyzkouší tvorbu puzzle a poté vše vymodelují v Tinkercadu a vytisknou.
Print approx. €4.54–€5.54 excl. taxPreliminary estimate for one variant
Adapter to reduce a standard 2in npt bulkhead fitting down to standard pool accessory 1.5in npt as used in a stock tank pool. I print any npt threaded items at .15mm to ensure the thread layers are solid and PETG for use in outdoor /…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for PETGSource material: PET
Žáci v rámci celoročního projektu "Pomáhejme si" vyrobí mechanickou tabulku pro jednoduché výpočty jednociferným číslem v oboru do 99 (sčítání, odčítání, násobení, dělení).
Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant
Pomůcka je určena především pro žáky se SVP v hodinách matematiky.Skládá se z tabulky s čtyřmi sadami čísel.Realizace projektu je určena pro pedagogy, ale mohou jej realizovat i žáci s pomocí učitele.
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Předmětem projektu bylo vytvořit model fotbalového hřiště s hráči, jako pomůcky do tělesné výchovy v rámci fotbalových tréningů a zápasů.
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
do záhonků
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Žáci se pokusí navrhnout, podle vzoru změřit a vytisknout vzorovou tabulku. Tabulka bude vymodelována a vytištěna na 3D tiskárně.
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Žáci II.stupně provedou průzkum v 1.třídách a zvolí nejobtížnější nebo první (základní) psací písmeno(a) a navrhnou CVIČNOU TABULKU, kterou vymodelují v programu TinkerCad a následně vytisknou.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Cedulky, které informují, jakým směrem otevírat dveře. Signs indicating which way to open the door.
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
tabulka dny malá
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Žáci navrhnou a vytvoří informační tabulky na označení tříd podle vlastních představ, které následně vymodelují a po vytištění umístí na dveře
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Smyslem projektu je vytvořit označení – popisky jednotlivých učeben na nové dveře ).
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
tabulka dny
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
You can find this model on Thingiverse. I added a 2 part version. That will save you support material. Scale it, print it, glue it together and paint it. Printer Settings Printer: MK3S Resolution: 0,15 Infill: 5% Supports: Yes Material:…
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…
Caulking Gun Nozzle Unblocker - without support
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Not much to say about this one, really. It's hulk, and he doesn't require any supports on FDM :) Note: “cc” in the filename means concave eyes, with the iris sculpted, and “cv” means convex, with smooth eyes. Also, “hd” in the filename…
🇲🇽 Welcome to Yucatán, Mexico! Ancient Ruins , a dedicated sub-collection by MiniWorld3D about past civilizations, presents: Mesoamerica. This model was created by Artemio García . This is available in two versions: Actual state (ruins)…
Support-Free Remix of Hulk Action Figure . This is a support-free FDM friendly remix of the model by 3DWP available here . No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in…
Traditionally, I and my father before me would use a nail to plug the end of a caulk tube. It worked, but you'd have to deal with rust from the nail and you'd need different sized nails for different holes. I looked for covers at the home…
Subscribe Now! Time-lapse print video https://youtu.be/0L3If6I31YU Other Hulk poses: Remix to support free and printed. Planet_Hulk_Bust_SupportFree_icz.stl (Infill required) Planet_Hulk_Bust_V2_SupportFree_icz.stl (Fixed strap on his…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
This tool is used to smooth caulking - the silicon stuff that is used in kitchens and bathrooms to seal between benches and tiles. I printed this in PLA but it's a bit too stiff. I printed in TPU and it's perfect! The small corner is 10mm…
This set of tools were made inspired in commercially available tools for working with caulking. Print with flat surfaces down Update: larger inner diameter so that tip goes further ahead closer to the end. Print Settings Printer Brand:…
All the Allen key storage model are one of each size, but I have too many sets with missing pieces accumulated over the years. First time 3D modelling and sharing, attached STP file which is supported in Bambu Studio and allow easy…
Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
I remixed these for my nephew, who is a marvel fan but just 4 years old. The original hands are way to big for him so I made them 75% size of the original (opening of the wrist is 75mm) and added a handle bar inside the glove so he can…
Organizer that holds four tubes of standard 48mm OD Caulk/Sealant. Two versions are provided: One that sits on the edge of a shelf, and the other hangs on a wall. Both can be mounted using two #8 screws. Print fits on a standard MK3/MK4…
Simple caulk spatula designed for edging. I've included versions in 6, 8, 10, and 12 mm sizes, both in the rounded and 45-degree designs. Created in Fusion 360. The round grip in the middle aids in holding it. I printed it with a 0.12 mm…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
A quick a simple storage box for you bulk Pokemon cards. You should be able to fit around 500 cards in this container. Once filled, they wont shake around or move about.
Give me a Like 💗 Follow Me 😁🤗 Caulk Tube If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. As an Amazon Associate, I earn from qualifying purchases. Category: Tools
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
I have tried to make my own version of hulk parts. My work is in progress so if you have feedback is welcomed. Some parts are missing and not been upgraded yet. 28/11/2023 - Added left and right fist 29/06/2024 - Added new head ,and left…
Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle
There's a few of these I've seen on here, all of them seemed to not fit or grip well. It took a few experiments, but this one seems to work well for me. Its fit snugly, and held, on all the 10oz caulk tubes I've tried it on. You'll need…
This model is compatible with the lego system.
The Hulk, as simple as it is. First Layer height 0.24mm Layer height 0.2mm Have fun with it.
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
Simple shulker box i made to store my fidgets in. I liked mkoistinen shulker box and wanted to have something that can hold more things inside so i made this. It may not screw open but still looks like a shulker box. I printed mine scaled…
Designed to store 10 sizes of drills in bulk quantities, lengths were tuned for the Screwfix Erbauer 1-6mm trade pack of drills size. That pack includes the following size drills: Drill Diameter (mm) Drill length (mm) Compartment length*…
The "Hulk Christmas Ornament" combines the spirit of the holidays with a touch of superhero power, bringing a playful contrast between Hulk’s serious expression and the cheerful red Santa hat perched on his head. Made from durable…
Changes I made the bigger on longer and changed the inner radius on both. The large holder has the sizes 6, 8 and 10 The smaller one has the sizes 1, 1.5, 2, 2.5, 3, 4 and 5 Pringing Nothing special, except, maybe make a color change…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
