115 models
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…
An all in one needle cutting guide and bending tool for redfoxdude 's popular Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool . It's uses the needle length (35/25mm) as the reference, so it's compatible with both the…
The stl files work for my case, in you'll need (in addition to the materials pointed out by redfoxdude) 4 3x10x4mm bearings (pressfit into spinring) and about 40x 4mm ball bearings. EDIT: forgot to mention I also incorporated heatset…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…
Remixed base for Delonghi Dedica EC685 bottomless portafilter with 26mm IMS Filter Basket
This is a remix of the great Umikot by @redfoxdude https://www.printables.com/de/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr (more remix information at the end). How to use: Use the printed funnel (base) and pour the…
Made fore the Delonghi Icona Vintage portafilter 52mm porta filter with 2 locking lugs Larger needle handle hole diameter for easier install Link for needles: https://s.click.aliexpress.com/e/_Dl6Knir
This is a needle depth/size cut guide. Slide the needles in and cut (ideally using angled cutters to get flush with the edge) Two guides are available, one for 55 and one for 65mm. Both have 5 slots which can all be loaded at once. Update…
I love this model but using the handle sometimes ended up lifting the wdt off the portafilter. Remove the handle and add some grip to the spin part giving more control over it. This remix is for the 54mm portafilter. Update 5/30/23 added…
I printed it with generic PETG 0.2mm layer height. Printing upside down (threads facing bed) does not need supports. Dimensions Height: 23 mm Spacing between tabs: 23.5 mm
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
As there was no 54mm version of v2 Umikot I decided to remix it myself. Tested it on stock Sage Bambino Plus double portafilter and a cheap basket I got with a bottomless portafilter. Used the Umikot58 - Mech V2 , Umikot58 - Spin Ring V2…
The original version of this model is excellent, but I wanted to make a slight change which would allow the outer face of the top section to be used for turning the assembly instead of a knob. The extra thickness should also increase the…
This is a remix of @redfoxdude_386759 Umikot - Planetary Gear Spirograph Espresso WDT Tool Love the original design, which look great and work perfectly, thanks again for the amazing design and hard work. But after use it for few days, I…
revised version of https://www.printables.com/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr for lelit
With the original 25mm Long Tab base, one of the long tabs hit against the handle of the gaggia portafilter, misaligning it. In this remix, the tabs have been readjusted allowing the Umikot to fit nicely on a JoeFrex Gaggia portafilter.…
I changed the 22mm base to work with my quick mill portafilter: -removed deep pocket since the basket lip is very thin -added 3 lugs (instead of 4) for needle protection
This Umikot compatible tamping station for Rancilio Silvia Portafilters (botomless or stock tested) can fit Umikot with bases ears/lug width set for LM (28,5mm) (see workspace on original work). I keep the design minimal so that it can be…
The tolerances should allow it to be used with needles that have the metal or the rubber handle. With needles that have a <20mm handle and a needle length of 40mm (without the handle) there is no need to cut the needles. The files contain…
Refer to the original post for any printing settings or assembling guide. I made this with the intention to suit my needs so only adapted the options I wanted.
In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I improved the Umikot mechanics with Thrust Bearings for a smooth, maintenance free…
This custom-designed Tamper Station is the perfect companion for the Umikot 58mm planetary gear espresso tool ( Umikot on Printables ). It offers dedicated slots for: Dosing ring/funnel Tamper Distributor/Leveler Puck screen Bottomless…
Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…
Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…
cutout in upper mech and spin ring for 6.35 mm ball bearings:…
Same idea that as this remix Umikot 58 WDT Grip Spin Ring by bsprange | Download free STL model | Printables.com But fits 54mm Breville version. You need to use 16mm screws. Texture is pulled from the upper mech so looks pretty nice to…
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I wanted to find a way to fine tune how the grip spin ring operates and create a…
This 3D are remix from below product: https://www.printables.com/model/569582-umikot-54mm-version-planetary-gear-spirograph-espr modify part: modify middle frame to fit 9barista handle lower stand & middle frame add magnet to make easy…
The stock 58mm Umikot works well with the Cafelat Robot - all except the stand. The Robot's deep basket requires longer needles than a typical portafilter basket. This deeper stand will allow you to store the Umikot with those longer…
Custom fitment adapted from the original. Generated through configuration page on OnShape page. Fits La Marzocco Linea Micra. Mini untested.
Umikot 58mm block for the coffee blocks knock box.
To print it you may need to rotate the model 180 degrees on the Y Axis. included with the STL is a pic with the needle length, the length is referring to the length that is coming out of the bottom of the tool after inserted. I suggest…
The Umikot is great! However, I didn't like that the screws needed to be tightened most of the way then backed off ¼ turn, as that resulted in occasional binding and screws tightening/loosening during use until I added loctite to hold…
Long needle version of the 54mm Umikot V2
Having only 30mm handle needles I was determined to not buy another 500. Thanks to Tyler having his model available I was able to make the required adjustments to use longer handles as used in the original umikot models. Please follow the…
I was delighted with BooKoo Coffe's electric WDT tool, but missed the precise planetary gearing of the Umikot. So I decided to combine the best of both worlds. This remix is suitable for 54 mm portafilters (Sage / Breville). Print the…
Non-Printed Parts Needed 4 M3 Threaded Inserts 23 Magnets, 6x2 mm 4 3m Screws 12mm long 4 3m Washers 4 3x10x4mm Bearings 4 O-Rings 1/8 x 3/64 10 0.35mm acupuncture needles 44 BB's Super Glue You can see the model on TinkerCad Print the…
I designed this knob for the Umikot to allow 1 finger operation. I find this more ergonomic and pleasant to use. To install this knob, use a 12mm M3 countersunk screw, as with the normal handle.
This remix adds a small lip to the spin ring to keep it centered and not create an elliptical motion in use.
I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…
A remix of Umikot WDT tool https://www.printables.com/model/481587-umikot-planetary-gear-spirograph-espresso-wdt-tool change the upper/base connection to flange style so the base can be used as a funnel to improve my workflow. reduce…
No extra input, follow the originators print guide it works first time. Enjoy!
I have combined the "Base V2 25mm ShortTab" and "Base V2 25mm NoTab 5x3Mag" and changed 4 tabs into 2.
Widened the slots of the 23mm version to 30mm to make it compatible with the Quickmill 3xxx evolution 70 double espresso basket. Should fit the Quickmill Orione and other models too. I can modify other depth or magnet variants too if…
***Umikot Flair Pro 2 rework is here! Check it out: https://www.printables.com/de/model/719084-umikot-flair-pro-2-rework *** I enjoyed the Umikot for Flair Pro 2 remix from @Vert, but in my workflow, I discovered things that didn't work…
After looking for a vertically-oriented portafilter for a while, I didn't find any that convinced me, so as my first CAD project I decided to create one myself. The tamping station has space for the following: Portafilter. 58-58.5mm…
This changes the 25mm LongTab Version of the base of the Umikot 58mm WDT Tool to fit onto QuickMill Baskets with three tabs that use E61 baskets. For use with E61 Baskets only. A version for the original QuickMill Baskets with a flat rim…
Remixed Umicot to fit the SWORKS 49mm Step Down Basket. Umikot will sit on top a standard 58mm Portafilter basket with gears and needle positions adjusted to WDT the inner 49mm area. -Required hardware and Print Properties are the same as…
Hello everyone Here is a remix of the remix of a Makerworld part. https://makerworld.com/de/models/746147?designId=746147#profileId-679191 I put the fixed needle back on the SpinRing and removed the crank holder. The MainBody and TopCover…
Made this station to keep my favorite tools organized. It might fit other machines, but i only tested my Bezzera BZ10 . The fitting for the hanging part is 3.6mm in CAD. Any 58mm Tamper will fit (58,9mm in CAD) and the other spot is made…
Remixed to have a detent to spin with index finger
The overall quality of the umikot is very good, almost reaching perfect WDT standards.
Base for 15g Quick Mill baskets. Didnt like the approach of other Remixes, so I re-did it.
When printing both the 54mm and the 58mm Umikot Spirograph WDT's shared by @redfoxdude , I noticed that the 54mm version inserted the needles from the top which required A little more difficulty with inserting the needles installing the…
Full load of files below for a one stop shop to print everything needed for the Umikot 58mm for Cafelat Robot bundle. The files attached are for the Umikot 58mm - Upper (30mm needle handles)
This model is adjusted to fit the NEOUZA 51mm Bottomless Portafilter from amazon.
Added a recess to the spin ring to accommodate DIN 912 Socket Head M3 screws with a flush surface.
Umikot58 Base23mm Lug Remix with 4 Lug (test on E61 Bottomless Portafilter) for easy to align on the portafilter. for other parts just download from the original maker…
i wanted a short tab stand for my umikot but i wanted it to be aerated as to discourage bacteria growth and use less filament
This is a modded handle for the Umikot that allows you to use threaded bearings. Product link to the bearing I got is: https://www.aliexpress.com/item/1005002584715570.html Onshape file if anyone wants to edit this:…
It is important to note that I printed the Umikot as per the tips in the model linked below (i.e. for Cafelat Robot use Umikot's No Tab options, scale all Umikot parts to 94% on the X and Y axis, and leave Z axis scaling unchanged; the…
I remixed the 3 prong version to be used with a 51mm 2 prong portafilter, specifically the delonghi ones. The fit is pretty snug but i find I prefer that as it prevents it from slipping off when you don't have magnets, or if you do have…
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
FOR USE WITH NEEDLES WITH 30mm
Keep your pyrographic coffee distributor and a tamper together on a nice stand
New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…
Modified Umikot 54mm version - exported tolerance to print with .8mm nozzle. 0.8mm needles M3 threaded inserts 603zz bearings F3D included with parametric diameters of bearings, inserts and needles Assembly tips: Make a bend in the needle…
Modified Umikot 26mm base, with lugs, to accommodate a 54mm dosing funnel . Misc. You will need to get longer needles to adequately reach the bottom of the protafilter. I uses these needles from Amazon for my purposes but I will note they…
49mm umikot, scaled down and adjusted from the 54mm original version
Remix of the 51mm Umikot variant to support non-countersunk screws.
Added a finger loop to the Umikot58s - Spin Ring V2.1 NoHandle NoCountersunk
Simple tool for cutting the needles for REDFOXDUDEs UMIKOT. Fast and simple print that saves some time with measuring correct length. 2 perimeters, 5% infill, 3 top and bottom layers are more than enough.
Umikot spacer for multiple baskets/filters This is an upgrade accessory to the glorious Umikot 58mm . It goes between the Umikot with 24mm lugs/spacers bottom and a 18g portafilter, it's 4mm thick and it enables WDT with two different…
Just a little adapter Ring for mounting your Umikot 54mm on top of Simbungu's single dose hopper. Supposed to be glued to the Single Dose Hopper with Cyanoacrylate. Have Fun!
Same as original “Umikot58 - Stand NoTab” but with curved edges.
I had to do some sanding around the groove as I'm not that skilled in 3D modelling and/or it's because my printer squishes the first layer too much - either way some sanding and a few drops of a food-safe lubricant in and around the…
changed the 24mm long tab for the famous umikot to fit aliexpress magnet 5x2.6mm also changed qty to 12 for better grip with the basket. added a solidworks file where you can change the mangets qty
Together with our two-year-old child, I like to make an Espresso. I use my machine, he uses his toy machine and our son loves to help. I enjoy using the Umikot myself, but it is still a bit much for our son and the Umikot does not fit on…
I saw some gridfinity bases for the Umikot long tab but I thought I could do one simpler so I hopped in Tinkercad and made this. This pushes the base down about as low as it will go since my drawer is fairly shallow!
A compact, integrated stand for a standard Rancilio bottomless portafilter, designed to accommodate the Umikot 58 with 24 mm long tabs . The stand supports the portafilter beneath its ears while leaving clearance for the Umikot to drop…
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !
changed the 24mm long tab for the famous umikot to fit aliexpress magnet 5x2.6mm also changed qty to 12 for better grip with the basket. added a solidworks file where you can change the mangets qty
Remixed to have a detent to spin with index finger
In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…
Minimum ring base required to support a naked portafilter with handle perfectly touching on the table. Inner hole doubles as a tamper holder. Every portafilter is slightly diffferent in bottom diameter and handle angle, so its impossible…
I changed the original holes sized for 3x5 magnets to fit my 5x5.
I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !
Adapted base for a Quickmill (820) portafilter, which has a flat top, this avoids spilling coffee over the edge.
Follow the instruction from the original remixed design: https://www.printables.com/model/1227062-electric-wdt-umikot-x-bookoo-coffee-54mm-version-r And from here:…
To start off, print the 30mm base and then adjust the height to desire needle length using these adapter (see reference in Umikot detail). Due to the length of the thread of the screw on the body, can only go down to 23mm depth. 7mm =…
![Umikot (52mm 2 lug Remix) - WDT Tool [Delonghi Icona Vintage]](https://media.printables.com/media/prints/601840/images/4788734_631ba4c7-2476-4606-b1fc-b154c6b5211a_2cdecddd-a72f-430a-be3f-bc115fa7711d/icona-vintage-wdt.jpeg)
